tET-DA2 Tiny Ethernet Module, 2-ch Isolated Analog Output
Compact Ethernet I/O module with two isolated analog voltage and current outputs, configurable for 0 ~ 10 V, 0 ~ 20 mA or 4 ~ 20 mA and accessible over Modbus TCP, MQTT and SNMP V2c.
- Two analog outputs, individually configurable as 0 ~ 10 V or 0 ~ 20 mA / 4 ~ 20 mA
- 12-bit resolution with ±0.1% of FSR accuracy and short circuit protection
- Modbus TCP/UDP, MQTT and SNMP V2c support over a 10/100 Base-Tx RJ-45 port
- Programmable power-on and safe values for each output
- Dual-watchdog and I/O pair (push and pull) connection
- 3000 VDC I/O isolation and ±4 kV EFT and ESD protection
136,00 € per piece
| 1–9 pcs | 136,00 € | |
|---|---|---|
| 10–30 pcs | 132,00 € | −3 % |
| 31+ pcs | 130,00 € | −4 % |
Informations sur le produit "tET-DA2 Tiny Ethernet Module, 2-ch Isolated Analog Output"
tET-DA2 CR brings two analog outputs onto Ethernet for control loops that need remote setpoints without a dedicated fieldbus gateway. Each channel can be set individually to 0 ~ 10 V, 0 ~ 20 mA or 4 ~ 20 mA, and the power-on and safe values are programmable, so outputs can be defined before and during a communication fault.
Configuration is handled through the built-in web server, and the module supports Modbus TCP, Modbus UDP, MQTT and SNMP V2c. Dual-watchdog operation, I/O pair connection (push and pull) and firmware updates over Ethernet help with fault handling and maintenance in distributed installations. Isolation of 1500 VDC on the Ethernet side and 3000 VDC on the I/O side, together with 4 kV ESD protection, suits electrically demanding cabinets.
The module is powered from +12 to +48 VDC and mounts on a DIN rail. It is rated for an operating range of -25 ~ +75 °C and is listed with CE, UKCA, FCC, RoHS and WEEE certifications.
Applications
- Industrial automation
- Industrial machinery
- Building automation
- Food and beverage systems
- Semiconductor fabrication
- Control systems
| Product type: | Analog output module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, Modbus UDP, MQTT, SNMP v2c |
| Analog outputs: | 2 |
| Ports: | 1 |
| Isolation: | 3000 VDC |
| Power input: | +12 to +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit MCU |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
| Status | Run, Ethernet |
| Analog Output | |
| Channels | 2 |
| Type | Voltage, Current |
| Range | Voltage: 0 ~ 10 V Current: 0 ~ +20 mA, +4 ~ +20 mA |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Short Circuit Protection | Yes |
| DA Output Response Time | 1 ms per channel |
| Programmable Output Slope | Voltage: 0.0625 ~ 512 V/Second Current: 0.125 ~ 1024 mA/Second |
| Open Wire Detection | For 4 to 20 mA only |
| Voltage Output Capability | 10 V @ 10 mA |
| Current Load Resistance | 500 Ω |
| Individual Channel Configuration | Yes |
| Power-on Value | Programmable |
| Safe Value | Programmable |
| Ethernet | |
| Ports | 1 x RJ-45, 10/100 Base-Tx |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, and SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2.1 W |
| Powered from Terminal Block | +12 to +48 VDC |
| Mechanical | |
| Dimensions (mm) | 52 x 96 x 27 (W x L x H) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 to 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Connexion