3G/4G/5G Products
4GB microSD card.
The BG96 CR is an LPWA communication module combining LTE Cat M1, LTE Cat NB1 and EGPRS in one device. It is built on the standard Mini PCI Express card format, so manufacturers can add cellular connectivity to their own designs without a custom board layout.On LTE the module supports up to 375 Kbps downlink and 375 Kbps uplink. Its global frequency band coverage spans 2G GPRS bands at 850/900/1800/1900 MHz and a broad set of FDD LTE bands, with B39 TDD available for Cat M1. Ultra-low power consumption is a key design point for battery-powered or power-constrained devices.For teams replacing an existing design, the module offers a migration route from GSM/GPRS, UMTS/HSPA and LTE modules. It operates from -35°C to +75°C and carries RED, FCC, RoHS and WEEE certification markings. Region of production is China.ApplicationsOEM integration of cellular connectivity into devicesLow-power wide-area (LPWA) IoT devices
EC20-CE CR is a 4G LTE Category 4 module aimed at machine-to-machine and IoT deployments. It uses the 3GPP Release 11 LTE feature set and comes in the standard Mini PCIe card format, so it can be fitted into a host device as a cellular communication module without a custom board layout.On LTE it provides up to 150 Mbps downlink and 50 Mbps uplink. Because it is backward-compatible with EDGE and GSM/GPRS networks, the module can still connect in remote areas that have no 4G or 3G coverage. Supported LTE bands are FDD B1/B3/B8 and TDD B38/B39/B40/B41, with WCDMA 900/2100 MHz and GSM 900/1800 MHz for legacy networks.The operating range is -35 to +75 °C, with storage from -40 to +85 °C. The module holds CCC, RoHS and WEEE certification and is listed as produced in China.ApplicationsM2M communicationIoT devices and gatewaysRemote sites with limited or no 4G or 3G coverage
EC21-AU CR is a low-power LTE category 1 module designed for M2M and IoT products that need economical, efficient cellular connectivity. It supports up to 10 Mbps downlink and 5 Mbps uplink on 4G LTE, which suits applications where data rate is less important than a stable, reliable network connection.The module uses the standard PCI Express Mini Card (Mini PCIe) form factor, so it can be fitted into a device design without a custom interface. Its 4G coverage spans FDD LTE bands B1, B2, B3, B4, B5, B7, B8 and B28 plus TDD LTE band B40. For legacy networks it also provides 3G WCDMA on 850/900/1900/2100 MHz with DC-HSPA+ up to 42 Mbps downlink, and 2G GPRS/EGPRS on 850/900/1800/1900 MHz.The compact module measures 30.0 x 51.0 x 4.9 mm (W x L x H) and operates from -35 °C to +75 °C, with storage rated from -40 °C to +85 °C. It is certified to FCC, RoHS and WEEE requirements and is produced in China.ApplicationsM2M and IoT devicesApplications where network rate is not critical but a stable, reliable LTE connection is requiredBroadband IoT products needing cellular connectivity
EC25-E CR is an LTE Cat 4 communication module for engineers adding cellular connectivity to M2M and IoT equipment. Its standard Mini PCIe card format lets manufacturers integrate wireless connectivity into their devices without a custom carrier design.The module supports LTE FDD bands B1, B3, B5, B7, B8 and B20 and TDD bands B38, B40 and B41, with up to 150 Mbps downlink and 50 Mbps uplink. Backward compatibility with GSM/GPRS and EDGE networks keeps the link available where 4G or 3G coverage is absent.The EC25-E CR carries RED, RoHS and WEEE certification and is rated for an operating temperature of -35 °C to +75 °C, with storage from -40 °C to +85 °C. Board dimensions are 30.0 x 51.0 x 4.9 mm (W x L x H).ApplicationsM2M communicationIoT applicationsBroadband IoT devicesRemote devices in areas without 4G or 3G coverage
The FN990A28 CR is a 5G/LTE data card module in the standard M.2 form factor, aimed at engineers building M2M and IoT equipment that needs cellular connectivity on a compact board-level module.It implements 3GPP Release 16 and supports both 5G NSA and 5G SA operation, together with EN-DC. Because it remains backward compatible with existing GSM/GPRS networks, it can be specified where legacy coverage is still part of the deployment.Peak rates are 3.4 Gbps DL / 0.46 Gbps UL in 5G NSA and 2.5 Gbps DL / 0.90 Gbps UL in 5G SA. The module operates from -40 °C to +85 °C and is rated for RED, FCC, CCC, RoHS and WEEE.ApplicationsM2M applicationsIoT applications
The G-4510 CR is a power-saving programmable automation controller designed for unattended remote sites where mains power is unavailable. Its built-in solar charger manages a 12 V lead-acid battery, so the unit can run from solar power in the field.The G-4510 CR combines 8 analogue inputs (0 ~ 20 mA, 12-bit) with 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. An Ethernet port and RS-232 and RS-485 COM ports allow it to connect to local equipment and to a host system. Optional 4G and NB modules support wireless data transmission, and an optional GPS module adds 32-channel tracking.Typical deployments include hydrologic and wind monitoring, mudslide monitoring, and vehicle or maritime tracking. The unit is DIN-rail or wall mountable in a metal casing rated for -20 ~ +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime GPS tracking systems
The G-4510D CR is a Mini-PAC for remote, battery-powered machine-to-machine sites where mains power is unavailable or impractical. Its built-in solar charger manages a 12 V lead-acid battery, and low-voltage disconnect and reconnect thresholds protect the battery from deep discharge. The ordering code adds the LCD display to the base G-4510 specification.The unit combines 8 current analogue inputs, 3 dry-contact digital inputs, 3 open-collector digital outputs and a Form C relay output with an RJ-45 Ethernet port and both RS-232 and RS-485 serial ports. Optional 4G (EC21-AU or EC25-E) or NB (BG96) modules provide wireless data transmission, and an optional GPS module with 32-channel All-In-View tracking supports vehicle or maritime position tracking.The embedded MiniOS7 operating system includes anti-virus protection, and TCP and UDP client connections are supported over 4G LTE. The device is built into a metal casing, is rated for -20 ~ +70 °C operation and mounts on DIN-rail or wall.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime GPS tracking
G-4514-4GAU is a power-saving programmable automation controller for remote, unattended sites where mains power and fixed networking are unavailable. It combines a cellular transceiver with a solar charger for 12V lead-acid batteries, so it can run as a self-contained data logging and control node.The controller runs an embedded MiniOS7 with anti-virus protection and supports GSM, WCDMA and 4G LTE connectivity, with TCP and UDP client connections over 4G LTE. On the wired side it provides a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 COM ports and SD card support. Its I/O set comprises 8 current-type analog inputs (0 ~ 20 mA), 3 dry-contact digital inputs, 3 open-collector digital outputs and one Form C relay output.Built-in real-time clock, NVRAM and EEPROM for timestamped data and retained settingsMetal DIN-rail or wall-mount housing rated for -20 ~ +70 °C operationRegional variant for Asia only, except ChinaApplicationsHydrologic monitoringMudslide monitoringWind monitoringVehicle monitoring and tracking
G-4514-4GC CR is a power saving PAC with a built-in 4G cellular transceiver and a solar charger for lead-acid batteries, designed for unattended M2M monitoring in remote locations where mains power is not available.The unit combines an 80 MHz processor, embedded MiniOS7 with anti-virus support, and I/O covering 8 analog inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and a Form C relay. Connectivity includes GSM, WCDMA and 4G LTE, a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and SD card support. TCP and UDP client connections are supported over 4G LTE.The listed variant is marketed for Asia only. Optional 128 x 64 dot LCM display and 32-channel GPS with All-In-View tracking are available on the wider G-4514 series and can suit vehicle or maritime tracking as well as hydrological monitoring.ApplicationsHydrologic and wind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking (with optional GPS)
G-4514D-4GAU CR is a cellular programmable automation controller for remote sites where mains power and fixed wiring are not practical. It combines a GSM/WCDMA/4G LTE transceiver with a solar charger for lead-acid batteries, so it can run unattended on a small solar installation. The D variant adds a 128 x 64 dot LCM display for local status viewing.The controller provides 8 current analogue inputs (0 ~ 20 mA), 3 digital inputs, 3 open-collector digital outputs and 1 Form C relay output. Serial communication is available through RS-232 (COM1) and RS-485 (COM2), while a 10/100Base-T(X) RJ-45 port connects the unit to a local network. The embedded MiniOS7 runtime and TCP/UDP client support over 4G LTE make it suitable for logging and forwarding field data from distributed sites.Built for harsh environments, the metal housing mounts on a DIN rail or wall. The listed operating range is -15 ~ +55 °C. This ordering code is intended for sale in Asia, excluding China.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and tracking
The G-4514D-4GC CR is a power saving programmable automation controller with an integrated cellular transceiver, built for remote M2M monitoring where mains power is limited. Its solar charger for 12V lead-acid batteries lets it run from a small solar installation, and the LCD display provides on-site status. This variant uses the frequency band for China and is intended for Asia only.The controller combines 8 analogue inputs (0 ~ 20 mA, 12-bit), 3 digital inputs, 3 open-collector digital outputs and a Form C relay output, so it can read field sensors and switch local equipment. Communication options include a 10/100Base-T(X) Ethernet port, RS-232 and RS-485 serial ports, and TCP/UDP client connections over 4G LTE. The unit runs an embedded MiniOS7 with anti-virus protection and supports SD card storage.Typical deployments include hydrologic and wind monitoring, as well as vehicle monitoring and tracking systems. The metal housing is DIN-rail or wall mountable, with an operating temperature range of -15 ~ +55 °C.ApplicationsHydrologic monitoringWind monitoringCar monitoring and tracking systems
4G Power Saving PAC with Solar charger and GPS. (Asia Only, Except China).
The G-4514P-4GC CR is a power-saving PAC for remote field sites that depend on battery and solar power. It combines a cellular transceiver with a solar charger for a 12 V lead-acid battery, so it can run unattended on a monitoring or tracking installation.Eight 0 to 20 mA analogue inputs, three digital inputs, three open-collector digital outputs and a Form C relay output cover common sensor and actuator wiring. Ethernet, RS-232 and RS-485 ports let it connect local devices to the cellular network, with TCP and UDP client connections over 4G LTE. The GPS option, with 32-channel All-In-View tracking, adds position data for vehicle or maritime use.A built-in real-time clock, NVRAM, EEPROM and watchdog timer support timekeeping and reliable operation, and SD card support adds storage. The metal housing mounts on DIN-rail or wall and is rated for -20 to +70 °C operation.ApplicationsHydrologic and wind monitoringMudslide monitoringVehicle monitoring and trackingMaritime tracking systems
4G Power Saving PAC with Solar charger, LCD display and GPS. (Asia Only).
The G-4514PD-4GC CR is a power-saving programmable automation controller with a built-in cellular transceiver and solar charger. It suits unattended sites that rely on battery power and need to report sensor data over a 4G LTE connection, such as hydrologic or wind monitoring stations.This ordering code is specified with an LCD display and a 32-channel GPS receiver, and is tuned for the Chinese frequency bands (Asia only). The GPS option allows the unit to act as a tracking node for vehicle or maritime applications, while the display gives on-site status information.Embedded MiniOS7 with anti-virus protectionCellular connectivity across GSM, WCDMA and 4G LTE with TCP and UDP client connectionsLead-acid battery charging with low-voltage disconnect at 11.1 V and reconnect at 12.6 V8 analogue current inputs (0 ~ 20 mA), 3 digital inputs, 3 digital outputs and 1 relay outputApplicationsHydrologic monitoringWind monitoringMudslide monitoring systemsVehicle monitoring and trackingMaritime tracking systems
GRP-2841M CR is a Linux-based gateway that bridges Ethernet and serial networks and can send the data over a cellular link. Its Cortex-A53 quad-core CPU, 1.6 GHz, with 1 GB LPDDR4 RAM handles large data volumes, which suits multi-device data collection in demanding plant environments.The unit works as an intelligent Remote Terminal Unit (RTU) and as a multiport serial gateway, with NAT and port forwarding built in. Its optional 4G/5G wireless module enables wireless data transmission, and the optional GPS function supports use as a tracking system for vehicle or maritime management. Remote I/O, Modbus data and camera video can all be carried in M2M applications.The CR code is the RoHS-marked variant of the GRP-2841M series, listed as a 4G/5G/Ethernet Gateway. Confirm the wireless module and GPS configuration against your requirements before ordering, as both are described as options for the series.Applications4G / 5G / Ethernet gateway applicationsRemote video monitoringSerial port gateway applicationsNode-RED applicationsVehicle management and maritime GPS trackingM2M data transmission of remote I/O, Modbus data or camera video
GRP-2841M-5GE CR is a 5G edge computing controller that combines a wireless router, a multiport serial gateway and a remote terminal unit in one DIN-rail unit. Its 1.6 GHz quad-core Cortex-A53 processor, 1 GB LPDDR4 RAM and 8 GB eMMC Flash on Linux Kernel 4.14.98 allow it to handle a large volume of data at the edge.The built-in 5G module provides Ethernet and optional Wi-Fi data transmission, with NAT and port forwarding. GNSS support covering GPS, GLONASS, BeiDou and Galileo makes it suitable for GPS tracking in vehicle management or marine systems. Node-RED support (optional) lets engineers build field control logic using flow-based programming.The housing is metal and the operating range is -25 ~ +70 °C. The ordering description marks this RoHS variant as Asia only, so check regional availability before ordering.Applications5G wireless routerRemote video monitoringSerial port gatewayNode-RED control logic at the edgeGPS tracking for vehicle managementGPS tracking for marine systems
GRP-540M-4GC CR is a cellular gateway for engineers who need to move data from Ethernet, serial and CAN devices over LTE, WCDMA, TD-SCDMA, CDMA2000 and GSM networks. This variant is supplied with the frequency band for China and is intended for Asia only.The unit includes a 10/100Base-T(X) RJ-45 port, two RS-232 ports (one reserved for console and debug), an isolated RS-485 port and a CAN bus interface. It also provides a 4G router function, port mapping and serial-to-4G gateway operation. A 32-channel GPS receiver outputs NMEA 0183 data, so the unit can be used for position tracking. Wi-Fi is not included on this ordering code; it is available only on the GRP-540M-4GX-W.The metal housing, watchdog timer and -25 ~ +75 °C operating range suit cabinet installations in harsh environments. The gateway mounts on DIN-rail or by screw.Applications4G router for remote sitesRemote video monitoringSerial port to 4G gatewayM2M data transfer from remote I/O and Modbus devicesGPS tracking
The GRP-540M-4GC-WF CR connects Ethernet, Wi-Fi, serial and CAN equipment to cellular networks over 4G FDD and TDD LTE, with 3G WCDMA and 2G GSM support. It suits engineers who need to move remote I/O, Modbus data or camera video off site without a fixed-line connection.A built-in GPS receiver with 32-channel All-In-View tracking and NMEA 0183 output allows the unit to serve as a GPS tracking system. The gateway also offers 4G router functionality and a serial port to 4G gateway function, with Micro SD storage expansion up to 32GB SDHC.The CR ordering code denotes the frequency band version for China. The metal, DIN-rail mountable housing is rated for -25 ~ +75 °C operation and is designed for harsh industrial environments.Applications4G routerRemote video monitoringSerial port to 4G gatewayGPS trackingM2M data transfer of remote I/O and Modbus data
The GRP-540M-4GE CR connects Ethernet, serial and CAN devices to cellular networks, giving engineers a way to reach remote equipment over 4G LTE with 3G WCDMA and 2G GSM fallback. It works as a 4G router with port mapping, and as a serial-to-4G gateway for field devices that have no network connection of their own.The unit adds GPS with 32-channel All-In-View tracking, so it can also be deployed as a GPS tracking node. Remote I/O and Modbus data, or camera video, can be carried over the cellular link, making the device suited to distributed M2M monitoring.Built with a metal casing and rated for harsh industrial environments, the gateway mounts on DIN-rail or by screw. Micro SD expansion and a watchdog timer support unattended operation.Applications4G router for remote sitesRemote video monitoringSerial port to 4G gatewayGPS tracking systemsM2M transfer of remote I/O and Modbus data over 4G/3G/2G
GRP-540M-4GE-WF is a cellular gateway that connects Ethernet, Wi-Fi, RS-232/RS-485 serial and CAN devices to 4G, 3G and 2G networks. It suits remote sites where engineers need to move device data, such as remote I/O or Modbus data, or camera video, over a mobile network without fixed-line infrastructure.Beyond data transfer, the unit includes a 4G router function, port mapping and a serial-to-4G gateway function. A built-in GPS receiver with 32 tracking channels allows it to be used as a GPS tracking system. The metal housing and an operating range of -25 ~ +75 °C make it suitable for harsh industrial environments. This ordering code carries the Asia Only, Except China designation.Designed for remote data transfer over cellular links in M2M deploymentsMounts on DIN-rail or by screwApplications4G routerRemote video monitoringSerial port to 4G gatewayGPS trackingM2M data transfer
The GRP-541M-4GC CR is a dual SIM 4G gateway that connects Ethernet, serial and CAN devices to cellular networks. It supports 4G FDD and TDD LTE, 3G WCDMA and 2G GSM. The CR suffix denotes the frequency band configuration for China, and the product is listed for Asia only.Engineers can use it to move remote I/O data, Modbus data or camera video over 4G, 3G or 2G links. A built-in 4G router, port mapping and a serial-to-4G gateway function support field deployments. The GPS receiver, with 32 channels and All-In-View tracking, allows the unit to double as a GPS tracking system.The metal housing is rated for an operating range of -25 ~ +75 °C and can be mounted on a DIN rail or by screws. A watchdog timer and a Micro SD slot (up to 32GB SDHC) are included for reliability and local storage.Applications4G routerRemote video monitoringSerial port to 4G gatewayGPS trackingM2M transfer of remote I/O and Modbus data
The GRP-541M-4GE CR bridges Ethernet, serial and CAN devices to a cellular network, with 4G FDD LTE, 3G WCDMA and 2G GSM support and two SIM slots. It suits remote M2M deployments that need to move I/O values, Modbus data or camera video over a mobile connection, and its built-in GPS module, with 32-channel All-In-View tracking, lets it double as a vehicle or asset tracking unit.Beyond gateway duties, the unit can act as a 4G router and provides port mapping, so networked equipment behind it can be reached remotely. Its serial-to-4G function covers RS-232 and isolated RS-485 devices, and a Micro SD slot (up to 32GB SDHC) adds local storage. The metal casing and wide operating range of -25 ~ +75 °C are aimed at harsh industrial sites.The ordering description limits this variant to Asia, excluding China, so check regional eligibility before ordering for European installations.Applications4G router for remote networksRemote video monitoringSerial port to 4G gatewayM2M transfer of remote I/O and Modbus dataGPS tracking systems