PEX-CAN200i-D PCI Express CAN Card, 2-Port Isolated CAN 2.0 Interface
2-port isolated CAN bus PCI Express card with a 9-pin D-sub connector, supporting CAN 2.0 parts A and B at 10K to 1M bps with 2500 Vrms photocoupler isolation.
- Two independent CAN channels on a 9-pin D-sub connector
- Compatible with CAN 2.0 parts A and B and fully compliant with ISO 11898-2
- 2500 Vrms photocoupler isolation on the CAN bus and 3 kV galvanic isolation
- 33 MHz, 32-bit, X1 PCI Express bus; fits PCI-Express x1, x4, x8 and x16 slots
- NXP SJA1000T controller with 16 MHz clock and direct memory mapping
- Jumper-selectable 120 Ω terminal resistor
€434.00 per piece
| 1-9 pcs | €434.00 | |
|---|---|---|
| 10-30 pcs | €412.00 | −5 % |
| 31+ pcs | €391.00 | −10 % |
Product information "PEX-CAN200i-D PCI Express CAN Card, 2-Port Isolated CAN 2.0 Interface"
PEX-CAN200i-D is an active CAN board for PCI Express systems, giving a PC two independent isolated CAN bus channels on a 9-pin D-sub connector. It suits engineers who need a cost-effective way to add CAN connectivity to a host computer for control and monitoring work.
The card uses an NXP SJA1000T CAN controller running from a 16 MHz clock, with a 82C250 transceiver. The controller handles bus arbitration, error detection with automatic correction and retransmission. CAN memory is directly mapped, and a jumper selects an on-board 120 Ω terminal resistor.
Drivers are provided for Windows and Linux, with support for LabVIEW, DASYLab and InduSoft. Demonstration code is available for VB, VC++, Delphi and BC++, and the SDK covers VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net and VB.Net.
Applications
- Control and monitoring of CAN bus networks
- Integrating diverse communication devices in industrial control systems
| Product type: | PCI Express CAN card |
|---|---|
| Interface: | PCI Express |
| Protocol: | CAN 2.0 |
| Ports: | 2 |
| Isolation: | 2500 Vrms (photocoupler), 3000 VDC (DC-to-DC) |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Software | |
|---|---|
| Driver | Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 5.4.0, LabView, DASYLab, InduSoft |
| SDK | VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net |
| PC Bus | |
| Type | 33 MHz, 32 bit, X1 PCI Express bus |
| CAN | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 2 |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Power | |
| Consumption | 100 mA @ 12 V, 100 mA @ 3.3 V |
| Mechanical | |
| Dimensions (mm) | 120 x 85 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +70 °C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Accessories
![CA-0910-C DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M](https://icpdas-tech.eu/media/d8/ee/9d/1793280036/CA-0910-C-CA-0910-C_la01.webp?ts=1793280036 "CA-0910-C DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M")
DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M.
CD-002 is a split ferrite core for suppressing electromagnetic and radio-frequency interference on round cables. Its hinged plastic case closes around the cable and holds the ferrite securely in place, so it can be fitted without re-terminating the cable.The core is aimed at low-frequency noise generated by engine control units, inverters and motors. It can be retrofitted to installed equipment or added during post-assembly work on the data and power cables of electronic devices, which suits environments where EMI or RFI affects signal integrity.Each package contains 10 cores, supplied in white and rated for an operating temperature of -40 °C to 75 °C. Maximum cable diameter is Ø13 mm.ApplicationsSuppressing low-frequency noise from engine control unitsReducing noise from inverters and motorsReducing EMI and RFI on data cables of electronic equipmentReducing EMI and RFI on power cables of electronic equipmentRetrofitting existing installations
CNT-CAN CR is a CAN bus connector for linking a CAN bus node to the bus line quickly. Its quick-connect technology removes the need to strip the bus conductors, which simplifies installation.The connector has a plastic housing with an integrated terminating resistor that can be selected with a built-in switch. It provides two cable entries and a 9-pin D-Sub female connector with a 90° cable outlet, and is available with a programming interface.It suits engineers who need to add a CAN device to an existing CAN bus line with minimal wiring work and a clear choice of bus termination.ApplicationsConnecting a CAN bus node to a CAN bus lineAdding CAN devices to an existing CAN bus network
5 Pins M12 A Code Assembly Plug (Female).
Similar products
The PEX-CAN200i-T CR is an economical two-port active CAN board for PCI Express slots, suited to engineers who need isolated CAN bus channels in a PC-based system. Each of the two independent CAN channels uses a 5-pin screw terminal connector, and the card can be fitted in PCI Express x1, x4, x8 or x16 slots.The card is built around an NXP SJA1000T CAN controller with a 16 MHz clock and an 82C250 transceiver. It supports CAN 2.0 parts A and B and is fully compatible with ISO 11898-2, with baud rates from 10 kbps to 1 Mbps. The controller handles bus arbitration, error detection with automatic correction and retransmission, and a built-in jumper selects a 120 ohm terminal resistor.Driver support covers Windows XP, 7, 8 and 10 (32-bit and 64-bit) and Linux 2.6.x to 5.4.0, together with LabView, DASYLab and InduSoft. SDK options include VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net and VB.Net, and demos are provided for VB, VC++, Delphi and BC++. The operating temperature range is 0 to +60 °C.ApplicationsControl and monitoring of CAN-connected devices across a range of industriesIntegrating diverse communication devices into PC-based control systems
The PEX-CM100-D is a single-channel CAN interface card for PCI Express slots, fitted with a 9-pin D-sub connector. It suits engineers who need a dedicated CAN port with onboard processing, so that real-time frame handling does not fall on the host PC. Its NXP SJA1000T controller supports both CAN 2.0A and CAN 2.0B, with user-defined baud rates from 10 k to 1 M bps.The card ships with built-in default firmware for CAN port communication, and users can load their own firmware for custom message handling. A PC-side monitoring tool assists with debugging user firmware, and the data exchange with the host application takes place through dual-port RAM. Five cyclic transmission sets, timestamping with at least ±1 ms precision and an onboard real-time clock support time-sensitive logging and scheduling.Hardware features include a jumper-selectable 120 Ω terminal resistor, a DIP switch for setting the board number, and isolation rated at 3000 VDC for DC-to-DC and 2500 Vrms for the photocoupler. The card has a PCI Express bus interface and an operating temperature range of 0 ~ +60 °C.ApplicationsNetworking intelligent devices, sensors and actuators within a system or sub-systemCAN applications on PCs that need preprocessing of CAN data streamsCAN systems with high bus loads where no messages should be lost
PEX-CM100-T is a single-channel CAN interface card for PCI Express slots. Its on-board 16-bit microcontroller handles filtering, preprocessing and timestamped storage of CAN messages, as well as real-time transmission, which reduces the processing load on the host PC. An NXP SJA1000T controller and 82C250/251 transceiver provide bus arbitration, error detection and automatic retransmission.The card runs built-in default firmware for CAN port communication, and users can execute their own firmware instead. A PEX-CM100 library is available for developing custom CAN applications, and data is exchanged between the application and the firmware through memory mapping. PC-side monitoring software assists with debugging user-defined firmware.This RoHS variant uses a 5-pin screw terminal connector. It suits engineers who need a PC-hosted CAN node for intelligent devices, sensors and actuators within a system or sub-system.ApplicationsNetworking intelligent devices, sensors and actuators within a system or sub-systemPreprocessing and timestamped storage of CAN data streams on a PCCustom CAN applications developed with the PEX-CM100 library
The PEX-CPM100-D is an active CANopen master card for PCI Express systems, providing a single CAN channel. An NXP SJA1000T controller and 82C250 transceiver handle bus arbitration, error detection with automatic correction and retransmission. A 16-bit microcontroller running the MiniOS7 real-time operating system manages message transmission, reception, filtering and storage, so the card can keep up with CAN traffic even on a PCI bus under heavy load.Because the CANopen master logic runs in the card's own firmware, time-critical network tasks do not depend on the host PC. Application developers can use the CANopen library on the host, with data exchanged with the firmware through memory mapping while the card is active.The board also works with the CANopen Motion Library, which follows the CiA-402 specification and covers position, velocity and torque control as well as synchronised control. Refer to the manufacturer's CANopen Motion Library documentation for details.ApplicationsCANopen network mastering in PC-based automation systemsMotion control on CANopen networks using the CiA-402 motion library