PET-7217RMS PoE Ethernet I/O Module, 8-ch True RMS AI, 4-ch DO

The ET-7217RMS converts AC input signals into their True RMS DC equivalents, so engineers can read the RMS value of complex waveforms over Ethernet. Each of its 8 differential analogue channels can be configured individually, with an input range from +150 mVrms to +10 Vrms.Four isolated open-collector digital outputs are built in, with programmable power-on and safe values. The 2-port 10/100 Base-TX switch with LAN bypass supports daisy-chain topologies, and the module communicates via Modbus TCP and Modbus UDP.The module includes a built-in web server with web HMI, access control by ID, password and IP filter, and dual watchdog protection. It is DIN-rail mounted and specified for an operating temperature of -25 ~ +75 °C.ApplicationsMonitoring AC signal levels as True RMS DC valuesDaisy-chained Ethernet I/O networks with Modbus TCP or Modbus UDP host systemsRemote acquisition and switching in DIN-rail control cabinets

The PET-7217 CR is a PoE-powered Ethernet I/O module with eight differential analogue inputs and four digital outputs, communicating over Modbus TCP or Modbus UDP. Each analogue channel can be given its own input range, and the input type (voltage or current) is selected by jumper for the corresponding channel.A built-in 2-port 10/100 Base-TX switch with LAN bypass allows modules to be daisy-chained along a line. The unit can be powered from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and includes a built-in web server, Web HMI and dual watchdogs.The digital outputs are isolated open-collector sink types with short-circuit and overload protection, and both power-on and safe values are programmable. Intra-module isolation is rated at 2500 VDC.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

PET-7217-10 CR is a PoE-powered Ethernet I/O module that brings analog measurement onto a Modbus network. It accepts either 10 differential or 20 single-ended analog inputs, selectable in software, and each channel can be configured with its own input range. Voltage or current input is chosen per channel by jumper position.The module has a built-in 2-port 10/100 Base-TX switch with LAN bypass, so units can be daisy-chained along a line without a separate switch. It is equipped with a built-in web server and web HMI for configuration, and supports both Modbus TCP and Modbus UDP. Access control uses ID, password and IP filtering, and dual watchdogs cover the module and communication.Two sampling modes are available: normal mode at 10 Hz and fast mode at 50 Hz across all channels. The module can be powered over PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and mounts on a DIN rail.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7217-A5 is a PoE-powered Ethernet I/O module that pairs eight differential high-voltage analog inputs with four digital outputs. Each input can be set to either ±50 V or ±150 V and configured independently, so one module can serve mixed voltage measurement points without extra signal conditioning.A built-in 2-port 10/100 Base-TX switch with LAN bypass allows daisy-chain wiring, while the built-in web server and web HMI let you configure the module and monitor it remotely. Modbus TCP and Modbus UDP are supported, and access control covers ID, password and IP filtering.Ordering code PET-7217-A5 CR is listed as RoHS compliant. Choose it when you need high-voltage analog input and digital output on an Ethernet node with Modbus connectivity to HMI, SCADA or PLC systems.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment