PET-7217 PoE I/O Module with 2-port Switch, 8-ch AI, 4-ch DO

The ET-7017 CR is an Ethernet I/O module that brings eight differential analogue inputs and four digital outputs onto a Modbus network. Each analogue channel can be set to voltage or current and given its own input range, which suits mixed sensor setups without changing hardware. This ordering code is listed with RoHS compliance.The digital outputs are isolated open-collector sink types rated at 700 mA per channel, with short-circuit and overload protection. Power-on and safe values are programmable, so outputs can be defined for start-up and fault conditions. Sampling can be switched between normal mode at 10 Hz and fast mode at 50 Hz across all channels.Host communication uses Modbus TCP or Modbus UDP over a single 10/100 Base-TX RJ-45 port. A built-in web server and web HMI are provided, Ethernet access is controlled by ID, password and IP filter, and dual watchdog functions are included.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7217 CR is an Ethernet remote I/O module for engineers who need to acquire sensor signals and switch outputs over a Modbus network. It provides eight differential analogue inputs, each of which can be configured with its own range. Input type is set by jumper, so each channel can accept voltage or current, and the inputs are protected against overvoltage up to 240 Vrms.On the network side, the module includes a 2-port 10/100 Base-TX switch with LAN bypass, which allows devices to be daisy-chained along a line. It supports Modbus TCP and Modbus UDP, and includes a built-in web server with web HMI, access control by ID, password and IP filter, and communication security features. The sampling rate can be switched between normal and fast modes.The four digital outputs are isolated open-collector sink types with short-circuit and overload protection, and can be given programmable power-on and safe values. The module offers 2500 VDC I/O isolation and 4 kV ESD protection, and is designed for DIN-rail mounting over an operating range of -25 ~ +75 °C.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7017 CR is a PoE-powered Ethernet I/O module that brings eight differential analogue inputs and four digital outputs onto a Modbus network. Each analogue channel can be configured with its own range, and the input type (voltage or current) is selected by the position of the corresponding jumper.The module suits engineers who need flexible signal conditioning with robust protection. Its 16-bit inputs offer normal mode (10 Hz total) and fast mode (50 Hz total) sampling, and the analogue channels tolerate 240 Vrms overvoltage. Intra-module isolation is rated at 2500 VDC, and the unit is qualified for 4 kV ESD protection.Building automationFactory automationMachine automationRemote maintenance and diagnosisTesting equipmentApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7217-10 CR is a PoE-powered Ethernet I/O module that brings analog measurement onto a Modbus network. It accepts either 10 differential or 20 single-ended analog inputs, selectable in software, and each channel can be configured with its own input range. Voltage or current input is chosen per channel by jumper position.The module has a built-in 2-port 10/100 Base-TX switch with LAN bypass, so units can be daisy-chained along a line without a separate switch. It is equipped with a built-in web server and web HMI for configuration, and supports both Modbus TCP and Modbus UDP. Access control uses ID, password and IP filtering, and dual watchdogs cover the module and communication.Two sampling modes are available: normal mode at 10 Hz and fast mode at 50 Hz across all channels. The module can be powered over PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and mounts on a DIN rail.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment