PET-7217-10 PoE Ethernet I/O Module, 10/20-ch Analog Input

The ET-7017-10 is an Ethernet-connected analog input module for engineers who need to bring a mix of voltage and current signals onto a network without a separate data acquisition unit. Each analog channel can be configured with its own input range, and the jumper settings determine whether a channel accepts voltage or current, so one module can serve several sensor types on the same panel.Sampling can be run in normal mode at 10 Hz across all channels or in fast mode at 50 Hz across all channels, allowing the speed to be matched to the application. The module provides a 16-bit resolution, with an accuracy of ±0.1% in normal mode and ±0.5% or better in fast mode. Overvoltage protection is rated at 240 Vrms for differential inputs and 150 Vrms for single-ended inputs.Communication is handled through one 10/100 Base-TX RJ-45 port supporting Modbus TCP and Modbus UDP, with ID, password and IP filter access control. A built-in web server and web HMI, along with dual watchdogs, support commissioning and supervision. The module is powered from a +10 ~ +30 VDC terminal block and mounts on a DIN-rail.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7217-10 CR brings analogue signal acquisition onto Ethernet, with 10 differential or 20 single-ended analogue inputs that can be configured channel by channel. Each channel is set to a voltage or current range in software, and the matching hardware jumper selects voltage or current input, so one module can handle a mixed set of sensor signals.Engineers will value the built-in 2-port switch with LAN bypass, which lets modules be daisy-chained along a line without a separate switch. The module offers a built-in web server with web HMI, Modbus TCP and Modbus UDP communication, and Communication Security with ID, password and IP filter access control. Two sampling modes let you trade speed against accuracy, with the normal mode rated at 10 Hz and the fast mode at 50 Hz across all channels.Protection features include 240 Vrms overvoltage protection on differential inputs, ±4 kV contact ESD protection on each terminal, and isolation rated at 2500 VDC on I/O and 1500 VDC on Ethernet. The module runs from +12 ~ +48 VDC and operates between -25 ~ +75 °C, and it mounts on a DIN rail.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7017-10 is a PoE-powered Ethernet analog input module for engineers who need voltage or current measurement on a networked I/O node. Its inputs can be set as 10 differential or 20 single-ended channels in software, and each channel can be given its own range, so one module can serve mixed sensor types on the same network.Each channel offers a choice of voltage ranges from ±150 mV to ±10 V and current ranges of ±20 mA, 0 ~ 20 mA and 4 ~ 20 mA, selected with jumpers. Resolution is 16-bit, and the module has two sampling modes: normal mode at 10 Hz total and fast mode at 50 Hz total. Open wire detection is available for 4 ~ 20 mA inputs, and differential channels are rated for 240 Vrms overvoltage protection.Configuration and monitoring are handled through a built-in web server with Web HMI, and the module supports Modbus TCP and Modbus UDP. Access is controlled by ID, password and IP filter. The unit is powered either from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and it mounts on a DIN rail.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The PET-7217-A5 is a PoE-powered Ethernet I/O module that pairs eight differential high-voltage analog inputs with four digital outputs. Each input can be set to either ±50 V or ±150 V and configured independently, so one module can serve mixed voltage measurement points without extra signal conditioning.A built-in 2-port 10/100 Base-TX switch with LAN bypass allows daisy-chain wiring, while the built-in web server and web HMI let you configure the module and monitor it remotely. Modbus TCP and Modbus UDP are supported, and access control covers ID, password and IP filtering.Ordering code PET-7217-A5 CR is listed as RoHS compliant. Choose it when you need high-voltage analog input and digital output on an Ethernet node with Modbus connectivity to HMI, SCADA or PLC systems.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment