CL-222-E PM1/PM2.5/PM10/CO2 Data Logger Module, RS-485 and Ethernet PoE
Environmental data logger for PM1/PM2.5/PM10, CO2, temperature, humidity and dew point, with up to 450,000 time-stamped records and RS-485 and Ethernet/PoE connectivity.
- Records PM1, PM2.5, PM10, CO2, temperature, humidity and dew point
- NDIR CO2 sensor measuring 0 to 9999 ppm
- Stores up to 450,000 records with date and time stamps
- RS-485 and Ethernet/PoE communication interfaces
- DCON, Modbus RTU, Modbus TCP and MQTT protocol support
- Web-based configuration with Windows utility, iOS and Android apps included
€651.00 per piece
| 1-9 pcs | €651.00 | |
|---|---|---|
| 10-30 pcs | €618.00 | −5 % |
| 31+ pcs | €586.00 | −10 % |
Product information "CL-222-E PM1/PM2.5/PM10/CO2 Data Logger Module, RS-485 and Ethernet PoE"
The CL-222-E CR is a data logger module that records particulate matter (PM1, PM2.5 and PM10), CO2, temperature, humidity and dew point, with date and time stamps on every record. Its NDIR CO2 sensor and laser-type particulate measurement suit indoor air quality monitoring where readings need to be stored and reviewed later.
Logged data can be stored in up to 450,000 records and downloaded for analysis. Real-time values can be viewed through the web-based configuration interface, the included Windows utility, or the iOS and Android apps, provided the device and the viewing equipment share the same local network.
The module connects over RS-485 or Ethernet, with PoE supported on the Ethernet port, and speaks DCON, Modbus RTU, Modbus TCP and MQTT. This makes it straightforward to add to an existing HMI, SCADA or IoT architecture. A relay output can drive an alarm or control an indoor air quality device when a monitored value requires action.
Applications
- Transportation of food or pharmaceuticals
- Food and beverage industry (HACCP)
- Blood stations and pharmacies
- Building and energy management
- Warehouse management
- Museums, archives and galleries
- Indoor or underground car park air quality monitoring
| Product type: | Data logger module |
|---|---|
| Interface: | Ethernet, RS-485 |
| Protocol: | DCON, Modbus RTU, Modbus TCP, MQTT |
| Relay outputs: | 1 |
| Ports: | 2 |
| PoE: | Yes |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | 0 ~ 50 °C |
| Mounting: | Ceiling/Wall |
| Housing: | Ø 150 x 53 mm |
Specifications
| System | |
|---|---|
| Alarm | PM1/PM2.5/PM10/CO2/RH/Temperature |
| Real Time Clock | Yes |
| Data Logger | Yes, up to 450,000 records |
| Temperature Measurement | |
| Range | -10 ~ +50°C |
| Resolution | 0.1°C |
| Accuracy | ±0.6°C |
| Life Time | 10 years |
| Humidity Measurement | |
| Range | 0 ~ 100% RH, Non-condensing |
| Resolution | 0.1% RH, Non-condensing |
| Accuracy | ±5% RH, Non-condensing |
| Life Time | 10 years |
| Dew Point | |
| Range | Calculated using temperature and relative humidity |
| Resolution | 0.1°C |
| CO2 Measurement | |
| Range | 0 to 9999 ppm (NDIR) |
| Resolution | 1 ppm |
| Accuracy | ±40 ppm ±3% of measured value |
| Response Time | 120 seconds |
| Warm-up Time | 5 minutes |
| Life Time | 15 years |
| PM1/PM2.5/PM10 Measurement | |
| Range | 0 to 1,000μg/m3 ( Laser Type) |
| Resolution | 1μg/m3 |
| Accuracy | ± 10% of FSR. |
| Response Time | 1 seconds |
| Warm-up Time | 20 seconds |
| Life Time | 5 years, Customer has to replace the filter patch. |
| Particle | |
| Sizes | 0.3μm, 0.5μm, 1μm, 2.5μm, 5μm, 10μm |
| Relay Output | |
| Channels | 1 x Form A, SPST 30 VDC @ 16 A or 250 VAC @ 16 A |
| Ethernet | |
| Ports | 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators) |
| COM Ports | |
| Ports | 1 x RS-485 1 x Ethernet |
| Protocol | DCON and Modbus/RTU (RS-485) Modbus TCP and MQTT (Ethernet) |
| Power | |
| Consumption | Non-PoE: 2.5 W (Max.) PoE: 2.7 W (Max.) |
| Powered from Terminal Block | +12 ~ +48 VDC |
| Mechanical | |
| Dimensions (mm) | Ø 150 x 53 (Ø x H) |
| Installation | Ceiling Mounting/Wall Mounting |
| Ingress Protection Rating | IP20 |
| Environment | |
| Operating Temperature | 0 ~ 50°C |
| Storage Temperature | -30 ~ +75°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login
Accessories
RJ45 Cable Male to Female, 30cm.
The EWB-C150 is a Ø120 external wall box with a plastic casing, intended as a mounting box for wall installations. It is supplied with two captive lid screws, so the lid stays attached to the box during installation and service.Choose the EWB-C150 when you need a simple, plastic wall-mounted box in the Ø120 format. The source lists RoHS and WEEE certifications for this model. Ordering code EWB-C150 CR is the variant offered under this listing.Ø120 external wall box formatPlastic casingTwo captive lid screws supplied
The FLT-C002 is a replacement filter patch for the CL-220 series PM2.5 sensor modules. Outdoor installations collect dust and aerosol that can block the sensor's measuring channel, which leads to continuous high-concentration alarms and unreliable readings. This pack of four rectangular patches allows the blocked element to be changed in the field.Because the patch can be replaced without uninstalling the device, maintenance is quicker and the module does not need to be sent back to the factory for repair. This reduces repair costs and avoids the downtime that normally accompanies a return-to-factory service.Sold as a pack of four patches, each measuring W27 x H20 mmRoHS compliantApplicationsPM2.5 particulate monitoring in dusty outdoor environments with CL-220 series sensorsMaintenance of CL-220 series modules where minimal downtime is required
Similar products
The CL-223-E CR is a wall or ceiling mounted data logger module that records PM1, PM2.5, PM10, CO, CO2, temperature, humidity and dew point. Each reading is stored with date and time stamps, with capacity for up to 450,000 records that can be downloaded for analysis. An NDIR sensor is used for CO2 measurement.Engineers can integrate the module into existing HMI or SCADA systems through RS-485 or Ethernet, with the Ethernet port also supporting Power over Ethernet. Supported protocols include DCON, Modbus RTU, Modbus TCP and MQTT, and a configuration web interface is provided. A relay output can be used for alarm signalling or to control an indoor air quality device.The module suits monitoring of food, pharmaceutical and storage environments, as well as building management and indoor car park air quality. Power is supplied from a terminal block at +12 to +48 VDC, or from PoE.ApplicationsTransportation of food or pharmaceuticalsFood and beverage industry (HACCP)Blood stations and pharmaciesBuilding and energy managementWarehouse managementMuseums, archives and galleriesIndoor or underground car park air quality monitoring
The CL-221-E is a data logger module for monitoring indoor air quality and climate. It measures PM1, PM2.5 and PM10 particulates, carbon monoxide, temperature and relative humidity, calculates the dew point, and stamps every record with date and time for later download.Readings can be polled over RS-485 or Ethernet, with PoE available, using DCON, Modbus RTU, Modbus TCP or MQTT. That makes it straightforward to feed an existing HMI, SCADA or distributed control system, or to publish data to an IoT platform. A relay output can drive an alarm or an indoor air quality (IAQ) device when set limits are reached.Configuration is done through a web-based interface, and a software utility plus iOS and Android apps are included for setup and monitoring. The module is intended for ceiling or wall mounting in dry indoor locations, with an operating range of 0 ~ 50°C.ApplicationsTransportation of food or pharmaceuticalsFood and beverage industry (HACCP)Blood stations and pharmaciesBuilding and energy managementWarehouse managementMuseums, archives and galleriesIndoor or underground parking lot air quality monitoring
CL-220-E CR is a data logger module for monitoring particulate matter alongside temperature, humidity and dew point. Each reading is stored with date and time stamps in internal memory of up to 450,000 records, which can be downloaded for trend analysis, compliance records or fault investigation.The module connects over RS-485 or Ethernet, with PoE available on the Ethernet port, so it can be added to existing HMI, SCADA or distributed control systems. DCON, Modbus RTU, Modbus TCP and MQTT are supported for polling and IoT-style publishing. A relay output allows it to drive an alarm or an indoor air quality (IAQ) device when set thresholds are reached.Configuration is handled through a web-based interface, with a Windows software utility and iOS and Android apps included for setup, live monitoring and log downloads. Logs can be exported to CSV for use in standard spreadsheet or analysis software.ApplicationsTransportation of food or pharmaceuticalsFood and beverage industry (HACCP)Blood stations and pharmaciesBuilding and energy managementWarehouse managementMuseums, archives and galleriesIndoor or underground parking lot air quality monitoring
The CL-222-WF CR is an indoor air quality (IAQ) data logger that measures PM1, PM2.5 and PM10 particulate matter, CO2, temperature, humidity and dew point. Readings are stored with date and time stamps, with capacity for up to 450,000 records, which suits long-term monitoring where a verifiable record of conditions is needed.Connectivity covers RS-485, Ethernet and Wi-Fi (IEEE 802.11b/g/n). DCON and Modbus RTU run over RS-485, Modbus TCP over Ethernet or Wi-Fi, and MQTT over Ethernet, so the logger can feed existing HMI, SCADA or distributed control systems. A relay output can drive alarm or IAQ equipment.Power can come from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block input. Configuration is done through a web interface, and real-time data can be viewed from the same local network using the supplied software utility, iOS app or Android app. The unit mounts on a ceiling or a wall.ApplicationsTransportation of food or pharmaceuticalsFood and beverage industry (HACCP)Blood stations and pharmaciesBuilding and energy managementWarehouse managementMuseums, archives and galleriesIndoor or underground parking lot automatic monitoring