PM-3114-160P-CPS Single-Phase Power Meter, 4-Loop CANopen, 100 A CT

PM-3114-100P-CPS CR is a compact DIN-rail power meter for single-phase energy monitoring over CANopen. It measures true RMS voltage and current and reports active, apparent and reactive power and energy, power factor and frequency, updated every second, so engineers can track consumption on the monitored equipment while it runs.This variant ships with four clip-on 60 A current transformers, each with a 10 mm inside diameter and a 4 m wire lead. The current input range is 0.05 A to 60 A, and the voltage input accepts 10 to 300 VAC. The meter supports four independent single-phase loops and two Form A power relay outputs, which can drive sirens or lights for alarm signalling.The unit is suited to generator monitoring, switchgear distribution systems and energy management projects where clip-on CT installation without disconnecting conductors is an advantage. Its W accuracy is better than 0.5% at PF=1.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

The PM-3114-240P-CPS CR is a DIN-rail power meter that measures four single-phase loops and reports the results over CANopen. It suits engineers who need true RMS voltage, current, power, energy and power factor data from a single compact module, with the current read through clip-on transformers rather than hard-wired connections.Each loop is measured through a 24 mm clip-on CT rated 0.15 A ~ 200 A, and the four CTs are supplied with 4 m leads. The meter accepts 10 ~ 300 VAC input at 50/60 Hz and updates its data every second. Accuracy for W is better than 0.5% at PF=1.Active, apparent and reactive power and energy, plus frequency, are available for monitoring.Two Form A power relay outputs (5 A @ 250 VAC or 5 A @ 30 VDC) can drive sirens or lights for alarm signalling.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

PM-3112-100P-CPS CR is a two-loop, single-phase power meter with a CANopen interface, suited to engineers who need real-time electrical data from a DIN-rail mounted device. Each loop uses a clip-on 60 A current transformer with a 10 mm aperture and a 4 m wire lead, so the unit can be fitted to existing conductors without disconnecting the load.The meter reports true RMS voltage and current, active, apparent and reactive power, the corresponding energy values, power factor and frequency, updated every second. Power accuracy is better than 0.5% at PF=1, and the measurement input accepts 10 ~ 300 V at 50/60 Hz, with current range 0.05 A ~ 60 A for this CT.Communication runs over CANopen at 125 k (default), 250 k, 500 k or 1 M, selectable by DIP switch. Two Form A power relay outputs rated 5 A @ 250 VAC or 30 VDC can drive sirens or indicator lights for alarm messages. The plastic housing measures 33 x 127 x 100 mm (W x L x H) and operates from -20 ~ +70 °C.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

PM-3112-160P-CPS CR is a DIN-rail power meter that reports real-time electrical usage for two independent single-phase loops over CANopen. Each loop has its own reference voltage, so one unit can cover two feeds in a compact enclosure.This variant is fitted with two 100 A clip-on current transformers with a 16 mm inside diameter and 4 m wire leads, which makes installation on existing conductors straightforward. The voltage input accepts 10 ~ 300 VAC, and two Form A power relay outputs rated 5 A @ 250 VAC or 30 VDC can drive sirens or lights for alarm signalling.Measures Vrms, Irms, kW, kWh, kVA, kVAh, kVAR, kVARh, power factor and frequencyUpdates data every secondDesigned for use on generator, switchgear and distribution circuitsApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management