PM-3114-100P-CPS Single-Phase Power Meter, 4-Loop CANopen with 60 A CT

The PM-3114-160P-CPS CR monitors four single-phase loops at once, giving real-time readings of voltage, current, power and energy for each loop. It is supplied with four 100 A clip-on current transformers with a 16 mm inside diameter and 4 m wire leads, which simplifies installation on existing conductors.Measurements include True RMS voltage and current, active, apparent and reactive power and energy, power factor and frequency, refreshed every second. Data is available over CANopen, with the baud rate chosen by DIP switch from 125 k (default), 250 k, 500 k and 1 M. Two Form A power relay outputs can drive sirens or lights for alarm signalling.The meter accepts 10 ~ 300 VAC input and is powered from +12 ~ 48 VDC. Its plastic housing mounts on a DIN rail and it operates from -20 ~ +70 °C, making it suitable for generator monitoring and switchgear distribution systems.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

The PM-3114-240P-CPS CR is a DIN-rail power meter that measures four single-phase loops and reports the results over CANopen. It suits engineers who need true RMS voltage, current, power, energy and power factor data from a single compact module, with the current read through clip-on transformers rather than hard-wired connections.Each loop is measured through a 24 mm clip-on CT rated 0.15 A ~ 200 A, and the four CTs are supplied with 4 m leads. The meter accepts 10 ~ 300 VAC input at 50/60 Hz and updates its data every second. Accuracy for W is better than 0.5% at PF=1.Active, apparent and reactive power and energy, plus frequency, are available for monitoring.Two Form A power relay outputs (5 A @ 250 VAC or 5 A @ 30 VDC) can drive sirens or lights for alarm signalling.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

PM-3112-100P-CPS CR is a two-loop, single-phase power meter with a CANopen interface, suited to engineers who need real-time electrical data from a DIN-rail mounted device. Each loop uses a clip-on 60 A current transformer with a 10 mm aperture and a 4 m wire lead, so the unit can be fitted to existing conductors without disconnecting the load.The meter reports true RMS voltage and current, active, apparent and reactive power, the corresponding energy values, power factor and frequency, updated every second. Power accuracy is better than 0.5% at PF=1, and the measurement input accepts 10 ~ 300 V at 50/60 Hz, with current range 0.05 A ~ 60 A for this CT.Communication runs over CANopen at 125 k (default), 250 k, 500 k or 1 M, selectable by DIP switch. Two Form A power relay outputs rated 5 A @ 250 VAC or 30 VDC can drive sirens or indicator lights for alarm messages. The plastic housing measures 33 x 127 x 100 mm (W x L x H) and operates from -20 ~ +70 °C.ApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management

PM-3112-160P-CPS CR is a DIN-rail power meter that reports real-time electrical usage for two independent single-phase loops over CANopen. Each loop has its own reference voltage, so one unit can cover two feeds in a compact enclosure.This variant is fitted with two 100 A clip-on current transformers with a 16 mm inside diameter and 4 m wire leads, which makes installation on existing conductors straightforward. The voltage input accepts 10 ~ 300 VAC, and two Form A power relay outputs rated 5 A @ 250 VAC or 30 VDC can drive sirens or lights for alarm signalling.Measures Vrms, Irms, kW, kWh, kVA, kVAh, kVAR, kVARh, power factor and frequencyUpdates data every secondDesigned for use on generator, switchgear and distribution circuitsApplicationsGenerator monitoringSwitchgear distribution systemsEnergy management