PISO-CAN200U-T 2-Port Isolated CAN 2.0A/2.0B Universal PCI Card
Two-port isolated CAN 2.0A/2.0B universal PCI card for PCs, with 2500 Vrms photo-coupler isolation on the CAN bus and programmable transfer rates up to 1 Mbps.
- Two independent CAN 2.0A/2.0B communication ports on 5-pin screw terminal connectors
- 2500 Vrms photo-coupler isolation on the CAN bus, plus 3000 VDC DC-to-DC isolation
- Programmable transfer rate from 10 k to 1 M bps
- Jumper-selectable 120 Ω terminal resistor for each port
- Direct memory mapping to the CAN controllers
- Universal 33 MHz 32-bit PCI card for 3.3 V and 5 V slots, plug and play
€455.00 per piece
| 1-9 pcs | €455.00 | |
|---|---|---|
| 10-30 pcs | €432.00 | −5 % |
| 31+ pcs | €409.00 | −10 % |
Product information "PISO-CAN200U-T 2-Port Isolated CAN 2.0A/2.0B Universal PCI Card"
PISO-CAN200U-T is a PCI card that adds two independent CAN bus ports to a PC, so engineers can connect controllers, sensors and actuators to a CAN network with real-time, prioritised messaging. Each port uses a 5-pin screw terminal connector.
The card is built around an NXP SJA1000T CAN controller running from a 16 MHz clock, and it handles CAN 2.0A and 2.0B frames. Optical isolation on the CAN bus, rated at 2500 Vrms, protects the host PC from faults on the network side. A jumper selects the 120 Ω terminal resistor for each port.
As a universal PCI card, it fits both 5 V and 3.3 V PCI slots and works as a plug and play device. Drivers and SDKs are provided for Windows and Linux, along with support for LabVIEW, DASYLab and InduSoft. The sibling model PISO-CAN200U-D is listed as a similar product.
Applications
- Control and monitoring systems in various industries
- Integrating diverse communication devices on a CAN network
- Battery exchange stations for electric motorcycles
| Product type: | PCI card |
|---|---|
| Interface: | PCI |
| Protocol: | CAN 2.0A/2.0B |
| Ports: | 2 |
| Isolation: | 2500 Vrms (photo-coupler) |
| Power input: | 3.3 V / 5 V PCI bus |
| Operating temperature: | 0 ~ +60 °C |
| Mounting: | PCI slot |
Specifications
| Software | |
|---|---|
| Driver | Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 5.4.0, LabView, DASYLab, InduSoft |
| SDK | VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net |
| PC Bus | |
| Type | Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play |
| CAN | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 2 |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-coupler |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Power | |
| Consumption | 250 mA @ 5 V |
| Mechanical | |
| Dimensions (mm) | 126 x 85 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +70 °C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Accessories
![CA-0910-C DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M](https://icpdas-tech.eu/media/d8/ee/9d/1793280036/CA-0910-C-CA-0910-C_la01.webp?ts=1793280036 "CA-0910-C DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M")
DB9 Female to 3-wire CAN Port Cable [Pin2, Pin3 and Pin7], 1M.
CD-002 is a split ferrite core for suppressing electromagnetic and radio-frequency interference on round cables. Its hinged plastic case closes around the cable and holds the ferrite securely in place, so it can be fitted without re-terminating the cable.The core is aimed at low-frequency noise generated by engine control units, inverters and motors. It can be retrofitted to installed equipment or added during post-assembly work on the data and power cables of electronic devices, which suits environments where EMI or RFI affects signal integrity.Each package contains 10 cores, supplied in white and rated for an operating temperature of -40 °C to 75 °C. Maximum cable diameter is Ø13 mm.ApplicationsSuppressing low-frequency noise from engine control unitsReducing noise from inverters and motorsReducing EMI and RFI on data cables of electronic equipmentReducing EMI and RFI on power cables of electronic equipmentRetrofitting existing installations
CNT-CAN CR is a CAN bus connector for linking a CAN bus node to the bus line quickly. Its quick-connect technology removes the need to strip the bus conductors, which simplifies installation.The connector has a plastic housing with an integrated terminating resistor that can be selected with a built-in switch. It provides two cable entries and a 9-pin D-Sub female connector with a 90° cable outlet, and is available with a programming interface.It suits engineers who need to add a CAN device to an existing CAN bus line with minimal wiring work and a clear choice of bus termination.ApplicationsConnecting a CAN bus node to a CAN bus lineAdding CAN devices to an existing CAN bus network
5 Pins M12 A Code Assembly Plug (Female).
Similar products
PISO-CAN200U-D is a two-port CAN bus interface card for PCs that gives engineers two independent CAN 2.0A/2.0B channels, each with optical isolation protection. It suits PC-based monitoring and control systems that need to talk to sensors, actuators and intelligent field devices over CAN.Each port is built around an NXP SJA1000T CAN controller with a 16 MHz clock and 82C250/251 transceivers, which handle bus arbitration, error detection with automatic correction and retransmission. The card offers direct memory mapping to the CAN controllers and a jumper-selectable 120 Ω terminal resistor per port. Baud rates are programmable from 10 kbps to 1 Mbps.The universal PCI form factor supports both 5 V and 3.3 V slots (33 MHz, 32-bit, plug and play). Driver support covers Windows and Linux, and the SDK includes VB, VC++, BCB, Delphi and .NET options, with compatibility listed for LabVIEW, DASYLab and InduSoft.ApplicationsControl and monitoring across a range of industrial applicationsBattery exchange stations for electric motorcycles
The PISO-CAN200U-FD-D is a PCI card that gives a host PC two independent CAN FD bus ports, each brought out on a 9-pin D-sub connector. It is intended for engineers who need to attach a PC to CAN FD networks while keeping the bus electrically isolated from the computer.The card is built around a Microchip MCP2518FD controller with TI TCAN1042HG series transceivers. It is compatible with ISO 11898-2 and with CAN 2.0 A/B and CAN FD. Message filter configuration is supported, and the board number is set with a DIP switch, which helps when more than one card is installed.Drivers are supplied for Windows 7, 8.1 and 10 and for Linux 5.10, with demos and libraries for C#.Net, VB.Net and VC++.Net. A built-in jumper selects the 120 Ω terminal resistor for the CAN bus.ApplicationsControl and monitoring of CAN FD networks from a PCIntegrating diverse CAN-connected devices into a single host
The PISO-CAN200U-FD-T is a PC-mounted CAN interface that adds two independent, isolated CAN FD ports to a Windows or Linux host through a universal PCI slot. CAN FD extends classic CAN 2.0 with a faster data phase and larger payloads, and this card is compatible with both CAN 2.0 A/B and CAN FD traffic on ISO 11898-2 networks.Each port uses a 5-pin screw terminal connector. The card is built around a Microchip MCP2518FD controller and TI TCAN1042HG transceivers, which handle bus arbitration and error detection, with auto-correction and re-transmission for reliable message delivery. Message filter configuration is supported, and the board number is set with a DIP switch when several cards are installed.Drivers are provided for Windows 7/8.1/10 and Linux 5.10, with demos and libraries for C#.Net, VB.Net and VC++.Net. Ordering code PISO-CAN200U-FD-T CR is the RoHS-compliant version.ApplicationsCAN bus control and monitoring from PC-based systemsIntegrating CAN and CAN FD devices into Windows or Linux host applicationsMulti-card CAN FD installations where each card needs a unique board number
PISO-CAN400U-D adds four independent CAN bus 2.0A/2.0B ports to a PC through a single universal PCI card. Each port uses an NXP SJA1000T controller and provides optical isolation on the bus side, which helps protect the host PC from faults and ground disturbances on the network.The card suits engineers building CAN networks around a PC-based supervisory or data acquisition system. Its universal PCI design accepts both 5 V and 3.3 V slots, and it is plug and play on a 33 MHz, 32-bit bus. Each port has a jumper-selectable 120 Ω terminal resistor, so termination can be set port by port to match the network layout.Drivers and SDKs are provided for Windows and Linux, with support for LabVIEW, DASYLab and InduSoft, and the SDK covers several common development environments. The vendor states that the card has been verified to drive 100 CAN nodes simultaneously.ApplicationsLogistics management systemsControl and monitoring of industrial CAN networks linked to a PCSensor and actuator networking within machine or sub-system control