PET-7250A PoE Ethernet I/O Module with 2-port Switch, 12-ch DI, 6-ch DO

ET-7050 CR is an Ethernet I/O module from the ET-7000 series that combines 12 digital input channels with 6 digital output channels in a single DIN-rail unit. Each digital input can be used as a 32-bit counter, so the module suits pulse counting and status monitoring tasks alongside on/off control.The module supports Modbus TCP and Modbus UDP over a single 10/100 Base-TX RJ-45 port, allowing it to be integrated with HMI, SCADA, PLC and other industrial control software. A built-in web server and web HMI provide browser-based monitoring and control, and a dual watchdog with programmable module and communication timers supports fault handling.Its digital outputs are isolated open-collector sink types, and the module offers 2-way isolation rated at 1500 VDC for Ethernet and 2500 VDC for I/O. Certifications listed for the product include CE, UKCA, FCC, RoHS and WEEE.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The ET-7250A is an Ethernet I/O module from the ET-7000/ET-7200 series that brings 12 digital inputs and 6 digital outputs onto a Modbus TCP/UDP network. Its built-in web server and Web HMI allow the I/O to be monitored and controlled from a browser, and the module can be read or driven by HMI, SCADA and PLC software over Ethernet.Each digital input accepts either dry or wet contact signals and can be configured as a 32-bit counter, with a maximum count of 4,294,967,295 and a frequency of 100 Hz. The six outputs are isolated open-collector, sink-type channels rated for 500 mA per channel, with programmable power-on and safe values.Two RJ-45 switch ports with LAN bypass allow the module to be daisy-chained along the Ethernet line without an external switch. Isolation is rated at 1500 VDC on Ethernet and 2500 VDC on I/O. The unit is powered from +12 ~ +48 VDC and is designed for DIN-rail mounting with an operating range of -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7050 CR is a networked I/O module from the ET-7000 family that brings 12 digital inputs and 6 digital outputs onto an Ethernet network. Each input channel can also operate as a 32-bit counter, which suits pulse counting and status monitoring tasks. The module is controlled remotely over Modbus TCP or Modbus UDP, so it can be integrated with HMI, SCADA, PLC and other industrial control software.Power can be delivered over the same copper Ethernet cable under IEEE 802.3af (Class 1) Power-over-Ethernet, which removes the need for a separate supply at the point of installation. Alternatively, the module can be powered from a terminal block at +12 ~ +48 VDC. Built-in web-based monitoring and control, together with dual watchdog functions and I/O pair connection, support straightforward commissioning and supervision.Suited to building, factory and machine automation, remote maintenance and diagnosis, and test equipment.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7251 CR is a PoE Ethernet I/O module that brings 16 wet contact digital inputs onto a Modbus network. Each channel can also operate as a 32-bit counter, with a maximum count of 4,294,967,295 and an input frequency of 100 Hz, which suits pulse counting and status monitoring from field contacts.An integrated 2-port 10/100 Base-TX switch with LAN bypass allows the module to be daisy-chained along a line of devices. It can be powered either from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block. The built-in web server and Web HMI, together with ID, password and IP filter access control, support configuration and remote supervision.Optical isolation is rated at 2500 VDC for I/O, with transient overvoltage protection stated at 3750 Vrms. Note that there is no channel-to-channel isolation. The module is DIN-rail mounted and is specified for an operating range of -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment