I-7565-G Intelligent USB to CAN Converter, 3000 Vrms Isolated CAN Port

The tM-7565 CR is a compact USB to CAN converter for engineers who need a laptop or PC to talk to a CAN network in a confined space. It complies with CAN 2.0A and 2.0B and ISO 11898-2, and supports CAN baud rates from 10 k to 1 M bps, including user-defined rates. Its functions are fully compatible with the I-7565.Power is taken from the USB connection, and both the power side and the CAN bus side are isolated. A selectable 120 Ω terminal resistor is built in, and communication parameters for both the CAN and USB sides are set in software. Software buffers on each side and an internal watchdog support stable operation.Listen-only mode lets the converter monitor CAN bus traffic and detect errors without transmitting. Pair connection mode allows two PCs to communicate with each other via USB, with a user-defined end-of-characters setting. The unit mounts on DIN-rail and is supplied with a CA-USB18 1.8 m cable.ApplicationsConnecting a laptop or PC to a CAN network where space is limitedMonitoring CAN bus messages and error conditions in listen-only modeCommunication between two PCs via USB in pair connection mode

The I-7565-CPM-G CR is a USB to CANopen master converter for engineers who want to run a CANopen network from a PC. It has its own 80186 CPU at 80 MHz that runs the converter firmware independently, so the host only has to send commands over USB. A set of APIs lets developers control the device from their own applications, which reduces the work needed to handle the CANopen protocol directly.The unit has one CANopen port built on an NXP SJA1000T CAN controller, with baud rates from 10 k to 1 M and a built-in 120 Ω terminal resistor. Its USB connection makes it easy to move between test benches and machines, which suits quick CANopen system setup and commissioning. The CANopen master also supports the CANopen Motion Library, which follows CiA 402 and covers position, velocity, torque and synchronised control.The I-7565-CPM-G CR is listed with a RoHS designation in its ordering description. It carries CE, UKCA, FCC, RoHS and WEEE certifications, and its operating range is -25 ~ +75 °C.ApplicationsIndustrial MachineryLaboratory Equipment & ResearchRestaurant AppliancesMaritimeMedicalSpecialty Vehicles

The I-7565-DNM-G CR is a USB-attached DeviceNet master converter. It lets a host PC run a DeviceNet master on the network without a dedicated PAC or fieldbus card, which makes it a cost-effective option for adding DeviceNet control to existing systems. It supports Group 2 Only Server and UCMM functions for communicating with slave devices.The converter has one independent CAN-based DeviceNet port, built around an NXP SJA1000T controller running at 16 MHz. The programmable master MAC ID and selectable baud rate of 125, 250 or 500 kbps suit a range of network layouts. A jumper provides a 120 Ω terminal resistor, and the port is isolated, rated at 3000 VDC for DC-to-DC and 2500 Vrms for photo-coupling.Drivers are supplied for Win XP, Win7, Win8 and Win10 in 32-bit and 64-bit editions, along with a Linux driver. The SDK covers x64 DLL, .NET DLL, VB6, VC6 and BCB6 environments. The unit mounts on a DIN rail and operates from -25 ~ +75 °C.ApplicationsCommunication with PowerFlex400 drivesSMC valve applicationsIFC-125 valve applicationsMKS FRCA valve applicationsSICK distance sensor applicationsDiagnostic systems for wheeled tractors

The I-7565-H1-G bridges a PC's USB port to a single CAN bus channel, letting engineers monitor, log and control CAN networks from a host computer. It is compliant with ISO 11898-2 and handles both CAN2.0A and CAN2.0B frames, with a maximum throughput of 3000 frames per second.Engineers typically choose this variant for its flexible timing and filtering. Baud rates can be set anywhere from 5 kbps to 1 Mbps, including user-defined values. Acceptance filter configuration, a Listen Only mode and CAN error frame reporting help when diagnosing a live network, while time-stamping of messages with at least ±1 ms precision supports data analysis.The CAN side is galvanically isolated at 2500Vrms, protecting the host and USB hardware from faults on the bus. Power is taken from USB, and the plastic DIN-rail housing is supplied with the CA-USB18 1.8 m cable. Drivers are provided for Windows and Linux, and the device is recognised automatically on connection.ApplicationsCAN bus monitoringBuilding automationRemote data acquisitionEnvironment control and monitoringLaboratory equipment and researchFactory automation