Infrared (IR)

Single-headed IR emitter cable (with adhesive pad, Ø 3 mm IRED, 2.5 m).

Single-headed IR emitter cable (with adhesive pad, Ø 5 mm IRED, 2.5 m).

Dual-headed IR emitter cable (with adhesive pad, Ø 3 mm IRED, 2.5 m).

Dual-headed IR emitter cable (with adhesive pad, Ø 5 mm IRED, 2.5 m).

IR-210 CR learns the infrared remote commands of a wide range of electronic devices and stores them in the module or in a file. Its six IR outputs can drive several devices individually or at the same time, making it a practical replacement for handheld remotes in automated systems.Control is handled over RS-232 or RS-485. The module acts as a Modbus RTU slave, so it can be added to a PAC, PLC or PC acting as Modbus master. DCON ASCII string commands are also supported. A configuration utility and a PC API library cover learning, testing and storage of IR commands.This order includes two CA-IR-SH2251 IR emitter cables. Their remote control range is 80% of that of the CA-IR-SH2251-5 cable, so check the required distance before selecting this variant.ApplicationsHome entertainment devicesVideo conferencing systemsSurveillance systemse-Classroom servicesLighting scenario controlHome and building automationICP DAS PAC IR remote applications

IR-210-5 CR is a universal infrared learning module that captures IR remote commands from a wide range of consumer and AV equipment, stores them in the module, and replays them on demand. Its six independent IR outputs allow one device to control several targets at once or each output to drive a different device.The module is designed for integration into automated systems. It accepts Modbus RTU commands and DCON ASCII strings over RS-232 or RS-485, so a PLC, PAC or PC can trigger IR commands directly. A PC API library is available for custom software, and the supplied utility handles learning, testing and storage of commands.Suited to smart home and building automation projects where legacy IR remotes need to be replaced by controller logic.Delivered with two CA-IR-SH2251-5 emitter cables for connecting to target equipment.ApplicationsHome entertainment controlVideo conferencing systemsSurveillance systemse-classroom servicesLighting scene controlHome and building automationIR remote control from ICP DAS PAC systems

IR-310-RM is a 10-channel high power relay module for switching mains-powered appliances and loads. It offers four 10 A channels and six 5 A channels, each Form C (SPDT) with NO and NC terminals and its own protection circuit. Relays can be operated independently or in sequence, either over RS-232/RS-485 using Modbus RTU as a slave, or with an infrared remote control.Up to five interlocked relay pairs can be configured, which suits reversing or directional switching such as CW/CCW motor control. Power-on relay values and power failure memory allow the module to restore a defined state after a supply interruption.The IR-310-RM CR is supplied with 64 custom IR commands and 32 built-in IR commands for relay control, and is designed for manual or automatic power switching, lighting scenarios and energy conservation.Applicationse-Classroom serviceLighting scenario controlHome and building automationManual and automatic power switchingEnergy conservationInterlocked switching, e.g. CW/CCW motor control

IR-712-MTCP learns infrared remote commands from a wide range of consumer and AV equipment, stores them in the module or exports them to a file, and then transmits them on demand. Its two IR outputs can drive separate devices one at a time or several at once, which makes it a practical way to bring non-networked remote-controlled equipment into a networked control system.Control is handled over Ethernet. The module acts as a Modbus TCP/UDP server, so PACs, PLCs and PC-based clients can trigger stored commands directly. An ASCII string command set over DCON (TCP/UDP) is also available for emitting IR signals. Configuration, learning, testing and command storage are carried out with the supplied IR utility.This ordering code includes two CA-IR-SH2251 emitter cables for the IR outputs. The module is intended for DIN-rail installation and is suited to smart home, building automation and AV installations where IR control needs to be integrated with a higher-level system.ApplicationsHome Entertainment DevicesVideo Conferencing SystemSurveillance Systeme-Classroom serviceLighting Scenario ControlHome and Building Automation

IR-712-MTCP-5 CR learns infrared remote commands from a wide range of electronic devices and stores them in the module or in a file for later reuse. Its two IR output channels can drive devices individually or simultaneously, making it a practical replacement for conventional IR remote controls in multi-device setups.The Ethernet interface acts as a Modbus TCP/UDP server and also accepts DCON ASCII string commands over TCP/UDP. A Modbus client such as a PAC, PLC or PC can therefore trigger IR commands directly, which simplifies integration into control systems.The supplied IR utility is used to configure the module, learn commands, test them and manage stored command libraries. This order includes two CA-IR-SH2251-5 emitter cables, whose remote control range is 125% of that of the CA-IR-SH2251 cable.ApplicationsHome entertainment devicesVideo conferencing systemsSurveillance systemse-Classroom servicesLighting scenario controlHome and building automation

The IR-712A learns IR remote commands from a wide range of electronic equipment and replays them on demand, so an engineer can replace handheld remotes with a device that a control system can drive. Learned commands can be held in the module or saved to a file for reuse.Two IR output channels allow individual or simultaneous control of several devices. Commands are issued over RS-232 or RS-485 using Modbus RTU Slave or the DCON ASCII string command set, which makes the module straightforward to add to a Modbus master such as a PAC, PLC or PC.A bundled software utility covers configuration, learning, testing and storage of IR commands, and an API library is available for PC program development. This ordering code includes 2x CA-IR-SH2251 IR emitter cables.ApplicationsHome entertainment devicesVideo conferencing systemsSurveillance systemse-Classroom servicesLighting scenario controlHome and building automationICP DAS PC with the IR remote application

IR-712A-5 is a universal IR learning module that captures the remote control commands of a wide range of electronic devices and replays them through two IR output channels. Each channel can drive a device on its own, or both can be triggered together, which suits multi-device control in rooms and building installations.Learned commands can be stored in the module or saved to a file. The module connects to a Modbus master such as a PAC, PLC or PC over RS-232 or RS-485, and also accepts DCON ASCII string commands. The bundled software utility and PC API library cover configuration, learning, testing and storage of IR commands.The module mounts on DIN-rail and operates from -25 ~ +75 °C. The two CA-IR-SH2251-5 emitter cables supplied give a remote control range of 125% of the standard CA-IR-SH2251 cable.ApplicationsHome Entertainment DevicesVideo Conferencing SystemSurveillance Systeme-Classroom serviceLighting Scenario ControlHome and Building AutomationICP DAS PAC with the IR Remote Application

IR-712P-MTCP is a PoE-powered IR learning module that records IR remote commands from a wide range of electronic devices, stores them in the module or saves them to a file, and replays them on demand. It has two IR output channels that can drive devices individually or simultaneously, with capacity for 512 IR commands.Control is through a 10/100 Base-TX Ethernet port using Modbus TCP/UDP or an ASCII string command set over DCON (TCP/UDP). This makes it straightforward to integrate with Modbus clients such as PACs, PLCs and PCs, so existing control systems can trigger IR devices without dedicated remote controls. The accompanying IR utility covers configuration, learning, testing and storage of commands.Two CA-IR-SH2251 IR emitter cables are included with the ordering code. The module suits smart home and building automation projects where IR control of AV, lighting or other equipment needs to be networked.ApplicationsHome entertainment devicesVideo conferencing systemsSurveillance systemse-Classroom servicesLighting scenario controlHome and building automation

The IR-712P-MTCP-5 learns infrared remote commands from a wide range of electronic devices, stores them in the module or exports them to a file, and replays them on demand. Its two IR output channels can drive devices individually or simultaneously, which suits setups with several targets to control.Control is through its Ethernet interface, which runs a Modbus TCP/UDP server and also accepts DCON ASCII string commands over TCP/UDP. The module can therefore be integrated with Modbus clients such as PACs, PLCs and PCs, and it can take the place of conventional IR remote controls in automated systems.Powered over Ethernet (IEEE 802.3af, Class 1) and mounted on DIN-rail, it is aimed at smart home and building automation projects. The package includes two CA-IR-SH2251-5 IR emitter cables, and the supplied cables give a remote control range of 125% of the CA-IR-SH2251.ApplicationsHome Entertainment DevicesVideo Conferencing SystemSurveillance Systeme-Classroom serviceLighting Scenario ControlHome and Building Automation