Mounting & Enclosures

IP67 RJ45 Plug.

Cap with Tether.

IP67 Power Plug (5-pin).

IP67 Power Plug (3-pin).

ASO-0015 is an optional wall mount kit for metal-case modules with a 28 mm case width. It lets you fix the module to a wall or panel without a DIN-rail, which suits installations where rail space is limited or the mounting surface is flat.The kit contains two wall mount brackets and six screws, so everything needed for the fixing is supplied in one package. Dimensions for the bracket are given by the manufacturer in millimetres.The kit is RoHS and WEEE certified. Check the case width of your module before ordering, as this accessory is designed only for the 28 mm size.ApplicationsWall mounting of 28 mm wide metal-case modules in control cabinets and panelsInstallations where DIN-rail mounting is not practical

The ASO-0023 is an optional wall mount kit for modules with a 44 mm wide metal case. It lets you fix a compatible module to a wall or panel without a DIN-rail, which suits installations where rail mounting is not practical.The kit contains two wall mounts and six screws, so everything needed for the fixing is included. It is an accessory and must be ordered separately from the module it is intended for.The product is listed as RoHS and WEEE compliant. Check the case width of your module against the 44 mm specification before ordering.ApplicationsWall or panel mounting of 44 mm wide metal-case modules

The ASO-0029 is a universal joint bracket designed as a mounting accessory for the WLS-R01. It is supplied as a dedicated accessory for that unit, so engineers can fix the WLS-R01 with a joint-style bracket rather than a standard fixed mount.The product is listed with RoHS and WEEE certifications. The source page also lists the iSN-301H/DIN and iSN-301V/DIN alongside the WLS-R01, but it does not state fitting details for those models, so confirm compatibility against your own requirements before specifying the bracket with them.Dimensions are referenced on the manufacturer page, but no measurements were supplied with the source data, so check the drawings before planning panel or enclosure layout.ApplicationsMounting the WLS-R01 in industrial installations

The ASO-0054 is a universal joint bracket accessory for the iSN-81x-MRTU Series. It gives system builders a dedicated mounting option when installing these units within a cabinet or machine assembly.Ordered as ASO-0054 CR, this bracket is listed as RoHS compliant and carries WEEE listing, which helps with materials compliance and electronic waste obligations on European projects.Dedicated to the iSN-81x-MRTU SeriesUniversal joint bracket form for flexible mountingApplicationsMounting iSN-81x-MRTU Series units with a universal joint bracket

The ASO-0057 is a wall mount kit for mounting metal case USB-4018HS Series modules on a wall. It is designed to hold two metal case modules with a case length of 153 mm, so two units can be fixed together as a single installation.The kit includes two wall mounts and eight screws. It is listed as RoHS and WEEE compliant, and is intended for engineers who need a simple mechanical fixing for USB-4018HS data acquisition hardware in a cabinet or equipment wall.Choose the ASO-0057 when you need an accessory matched to the 153 mm metal case size rather than a generic bracket. Check the case length of your modules before ordering, as the kit is specified for this case size only.ApplicationsWall mounting of two USB-4018HS metal case modules

ASO-0058 is a wall mount kit for installing a 100 mm wide metal case module on a wall. It is an optional accessory, so it suits installations where a surface mount is preferred to a standard mounting method.The kit contains two wall mounts and four screws, so everything needed for the fixing is included in the box. Dimensions are given in millimetres in the manufacturer's drawing, which should be checked against the module before fitting.Designed for 100 mm case width metal modulesIncludes two wall mounts and four screwsRoHS and WEEE compliantApplicationsWall mounting of 100 mm wide metal case modules in control cabinets, panels or equipment racks

ASO-0059 is an optional wall mount kit for the USB-4018HS Series. It is designed for modules in a metal case with a width of 153 mm, giving a simple way to fix the unit to a wall rather than mounting it on a panel or rail.The kit is supplied with everything needed for the fixing:One wall mount bracketFour screwsThe ASO-0059 is RoHS and WEEE certified. Check the case width of your module against the 153 mm specification before ordering.ApplicationsWall mounting of a 153 mm wide metal-case USB-4018HS module

ASO-0060 is a magnetic base universal joint bracket for holding equipment on ferrous surfaces while allowing the mounting angle to be adjusted. Its NdFeB magnet and iron components provide the holding base, and the TPE rubber parts complete the assembly.The magnet grade is rated N35 ~ N52, and the bracket is specified for an operating temperature range of -40 ~ +80 °C. It is supplied in rubber-sealed packaging and is listed as RoHS and WEEE compliant.Suitable for positioning and mounting on steel or other ferrous surfacesMagnet grade N35 ~ N52Operating temperature -40 ~ +80 °CApplicationsMounting and positioning on steel or other ferrous surfaces

ASO-0062 is a DIN-rail mount clip with a 28 mm width, supplied with one clip and two screws. It gives engineers a simple way to fix compatible ICP DAS equipment to a standard DIN rail inside a control cabinet.The clip is sold as the ordering code ASO-0062 and carries RoHS and WEEE certification. The source data lists the ordering entry as ASO-0062 CR with the same description, so the 28 mm width and the included parts apply to that listing.28 mm clip widthSupplied with one DIN-rail clip and two screwsRoHS and WEEE certified

The ASO-0063 is a DIN-rail mount clip accessory with a 44 mm width, intended for fitting equipment to a DIN rail. It is supplied as a kit with one DIN-rail clip and four screws, so the mounting hardware is ready to use on installation.Choose this accessory when you need a simple, standard DIN-rail mounting solution. The source data lists it as RoHS and WEEE certified, and the dimensions are given in millimetres.Width of 44 mmKit includes one DIN-rail clip and four screwsListed as RoHS and WEEE certifiedDimensions specified in millimetresApplicationsDIN-rail mounting

ASO-0064 is a 60 mm wide DIN-rail mount clip for mounting compatible equipment on a DIN rail. It is supplied with one DIN-rail clip and four screws.The source lists the clip with RoHS and WEEE certifications. Dimensions are provided in millimetres in the manufacturer's documentation.Choose this accessory when you need a 60 mm width DIN-rail clip with the included fixings for panel or cabinet installation.

USB 2.0 A-Male to Mini-5P B-Male Cable, 1M.

DRS-125 is a 125mm length of 35mm DIN-rail made from stainless SUS304 at 1.0t thickness. It provides a corrosion-resistant mounting track for equipment in panels and enclosures where a standard DIN-rail is required.The rail is prepunched with 10mm feed-through holes along its length, which allow it to be fixed in place with the holes provided. Dimensions are given in millimetres on the manufacturer's drawing.

DRS-240 is a 240 mm length of 35 mm DIN-rail made from stainless steel SUS304 at 1.0 mm thickness. It gives a corrosion-resistant mounting base for DIN-rail devices such as I/O modules, converters and gateways in control cabinet installations.The rail is supplied with prepunched 10 mm feed-through holes, which are useful for routing cables or fixing the rail through the enclosure. Check the length against your panel layout before ordering, as this code is specified only at 240 mm.240 mm rail length35 mm DIN-rail profileStainless steel SUS304, 1.0 mm thicknessPrepunched 10 mm feed-through holesApplicationsMounting DIN-rail devices in control cabinetsIndustrial automation panel installations

DRS-360 is a 360 mm length of 35 mm DIN-rail for mounting industrial modules and terminal blocks inside control cabinets and enclosures.The rail is manufactured from SUS304 stainless steel with a 1.0 t wall thickness, giving a corrosion-resistant mounting base suited to demanding installation environments.Prepunched 10 mm feed-through holes for fixing and routingStainless SUS304 construction, 1.0 tApplicationsControl cabinet and enclosure mounting of DIN-rail modulesIndustrial automation panel building

The EWB-C150 is a Ø120 external wall box with a plastic casing, intended as a mounting box for wall installations. It is supplied with two captive lid screws, so the lid stays attached to the box during installation and service.Choose the EWB-C150 when you need a simple, plastic wall-mounted box in the Ø120 format. The source lists RoHS and WEEE certifications for this model. Ordering code EWB-C150 CR is the variant offered under this listing.Ø120 external wall box formatPlastic casingTwo captive lid screws supplied

The EWB-T28 is an external wall box sized for 2.8-inch units, giving a plastic enclosure for wall mounting outside a control cabinet.The lid is secured with six captive screws, so they stay attached to the lid during installation and maintenance. The EWB-T28 is listed as RoHS and WEEE.Plastic casingSix captive lid screwsApplicationsExternal wall mounting

EWB-T28-BK is an external wall box sized for 2.8-inch units. It provides a plastic enclosure for wall-mounted installations where a 2.8-inch unit needs an outer housing.The lid is fastened with six captive screws, so the screws stay attached to the lid when it is opened for servicing. The box is supplied as a RoHS and WEEE compliant accessory.Plastic casingSix captive lid screwsRoHS and WEEE certifiedApplicationsWall-mounted housing for a 2.8-inch unitExternal installations requiring an outer enclosure for a 2.8-inch unit

The EWB-T43 is a 4.3-inch external wall box, supplied as a mounting accessory for wall-mounted installations. It provides a plastic casing with a captive-screw lid, so the cover stays attached to the box when it is opened for servicing.Choose the EWB-T43 when you need a simple wall-mounted housing in the 4.3-inch size class rather than a custom enclosure. The lid is secured with six captive screws.Plastic casingSix captive lid screwsListed certifications: RoHS, WEEEApplicationsWall-mounted installation of 4.3-inch units

The EWB-T43F is a plastic external wall box for 4.3-inch units, providing a surface-mounted enclosure for wall installation. It is an accessory for projects that need a simple housing rather than a panel cut-out.The box uses eight captive lid screws, so the lid stays attached to the body during installation and servicing. The manufacturer lists this item as RoHS and WEEE certified.Plastic casingSuited to 4.3-inch unitsExternal wall mountingEight captive lid screwsRoHS and WEEE listedApplicationsSurface wall mounting of 4.3-inch unitsAccessory housing for panel-style installations