PET-7215 PoE Ethernet I/O Module with 2-port Switch, 7-ch RTD Input

The ET-7015 is built for measuring temperature over long cable runs. Each of its 7 channels accepts Pt100, Pt1000, Ni120, Cu100 or Cu1000 sensors, and three-wire RTDs are compensated automatically whatever the wire length, so the lead resistance does not have to be tuned out by hand.Open-wire detection on every channel helps identify broken sensor leads quickly. Communication runs over Modbus TCP and Modbus UDP, with a built-in web server and web HMI for configuration and monitoring. Access is controlled by ID, password and IP filter, and dual watchdogs support fault recovery.Isolation is rated at 2500 VDC for I/O and 1500 VDC for Ethernet. The module is RoHS-compliant, offers 4 kV ESD protection, and runs from +10 ~ +30 VDC on a DIN-rail mount across an operating range of -25 ~ +75 °C. Typical uses include building automation, factory and machine automation, remote maintenance and diagnosis, and test equipment.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7215 is an Ethernet I/O module for temperature measurement with resistance temperature detectors over long cable runs. Each of its seven differential channels can be configured individually for Pt100, Pt1000, Ni120, Cu100 or Cu1000 sensors, and three-wire RTD lead resistance is compensated automatically, whatever the wire length.The built-in 2-port 10/100 Base-TX switch with LAN bypass allows modules to be daisy-chained along a network line. Communication runs over Modbus TCP or Modbus UDP, and the built-in web server and Web HMI let you check and configure the unit from a browser, with ID, password and IP filter access control.Suited to building automation, factory and machine automation, and remote diagnosis or maintenance, the ET-7215 is ordered as ET-7215 CR. It carries CE, UKCA, FCC, RoHS and WEEE marks and operates from +12 ~ +48 VDC over a temperature range of -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7015 CR is a PoE Ethernet I/O module for remote RTD measurement. Each of its 7 differential channels can be set up individually for Pt100, Pt1000, Ni120, Cu100 or Cu1000 sensors, so one module can serve a mix of sensor types on the same network.For long cable runs, the module automatically compensates for 3-wire RTD lead resistance, regardless of wire length, and includes open-wire detection to flag broken sensor connections. It is powered either from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and mounts on DIN-rail.Built-in web server and web HMI allow configuration and monitoring from a browser. Communication is via Modbus TCP or Modbus UDP, with ID, password and IP filter access control, a dual watchdog and 2500 VDC intra-module isolation. The module is qualified for 4 kV ESD protection.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7217 CR is a PoE-powered Ethernet I/O module with eight differential analogue inputs and four digital outputs, communicating over Modbus TCP or Modbus UDP. Each analogue channel can be given its own input range, and the input type (voltage or current) is selected by jumper for the corresponding channel.A built-in 2-port 10/100 Base-TX switch with LAN bypass allows modules to be daisy-chained along a line. The unit can be powered from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and includes a built-in web server, Web HMI and dual watchdogs.The digital outputs are isolated open-collector sink types with short-circuit and overload protection, and both power-on and safe values are programmable. Intra-module isolation is rated at 2500 VDC.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment