PET-2217H PoE I/O Module with 2-port Switch, 8-ch High Speed AI

ET-2217H is an Ethernet I/O module for engineers who need fast, multi-channel analogue acquisition on a networked device. Its eight differential inputs can each be configured individually for voltage or current signals, with the input type set by DIP switch and ranges from ±2.5 V up to ±10 V or 0 ~ +20 mA, 4 ~ +20 mA and ±20 mA.Data resolution is 16-bit, and the module samples across all channels at a total rate of 8 kHz when using TCP streaming. The available sampling rate per channel scales with the number of channels in use. Protection features include common voltage protection of ±200 VDC, overvoltage protection of +50 VDC and overcurrent protection of 50 mA at 50 VDC (max.). Isolation is rated at 1500 VDC on Ethernet and 3000 VDC on I/O.The built-in two-port switch allows LAN bypass and daisy-chain wiring, which simplifies cabling in distributed panels. Configuration is done through the built-in web server, with password and IP filter access control. Supported protocols include Modbus TCP, Modbus UDP, MQTT and SNMP V2c, and the module can be powered from a +10 ~ +48 VDC terminal block.ApplicationsFactory AutomationMachine AutomationBuilding AutomationRemote Diagnosis & MaintenanceTesting Equipment

The PET-2217 CR is a PoE-powered Ethernet analog input module that accepts 8 differential or 16 single-ended channels. Each channel can be configured individually for voltage or current measurement, with ranges from ±150 mV up to ±10 V and 0 ~ +20 mA, +4 ~ +20 mA and ±20 mA. It suits engineers who need networked analog acquisition without a separate controller on the I/O side.Built-in protection covers overvoltage up to 120 VDC and overcurrent up to 50 mA at 110 VDC (max.), with 3000 VDC I/O isolation and EMS protection rated to IEC 61000-4-2, -4 and -5. The module has a 2-port 10/100 Base-Tx switch with LAN bypass, so units can be daisy-chained along a network line. It also provides a built-in web server, password and IP filter access control, and dual-watchdog support.For integration, the module supports Modbus TCP, Modbus UDP, MQTT and SNMP V2c. MQTT publishing and subscribing, with automatic reconnection and Keep-Alive, and SNMP Trap notifications on I/O changes or restarts help with remote monitoring and maintenance. Sampling can be set to 20 Hz normal mode or 200 Hz fast mode.ApplicationsFactory automationMachine automationBuilding automationRemote diagnosis and maintenanceTesting equipment

PET-2215H is an Ethernet-connected RTD input module for engineers who need several temperature sensors read quickly and reliably. Each of its 8 channels can be set individually and supports Pt100, Ni120, Cu50 and Cu100 sensors, with 3-wire lead resistance compensation to keep readings accurate over longer cable runs. Open wire detection is available on every channel.The built-in 2-port Ethernet switch with LAN bypass allows modules to be daisy-chained along a network, reducing the number of switches and cable runs needed in the cabinet. The module can be powered from PoE (IEEE 802.3af, Class 1) or from a +10 ~ +48 VDC terminal block, and it is configured through a built-in web server.For noisy industrial sites, the module provides EMS protection (EFT, ESD and surge) and 3000 VDC I/O isolation. Its metal housing mounts on DIN-rail or wall, and it operates from -25 ~ +75 °C.ApplicationsFactory automationMachine automationBuilding automationRemote diagnosis and maintenanceTesting equipment

The PET-2215H-16 CR is a 16-channel RTD input module for engineers who need fast, accurate temperature measurement over Ethernet. Each channel can be fitted with Pt100, Ni120, Cu50 or Cu100 sensors and runs at up to 90 Hz in Fast Mode, with open wire detection and 3-wire lead resistance compensation so that cable length has less effect on readings.A built-in 2-port 10/100 Base-Tx switch with LAN bypass lets you daisy-chain modules along a network segment, which reduces the switching hardware and cabling needed at each installation. The unit can be powered from PoE (IEEE 802.3af, Class 1) or from a +10 ~ +48 VDC terminal block, and it is configured through its built-in web server.For noisy industrial environments, the module provides 3000 VDC I/O isolation and EMS protection to IEC 61000-4-2, -4 and -5. Communication is supported over Modbus TCP, Modbus UDP, MQTT and SNMP V2c, and firmware can be updated via Ethernet. Housed in a metal casing, it mounts on DIN-rail or wall and operates from -25 ~ +75 °C.ApplicationsFactory AutomationMachine AutomationBuilding AutomationRemote Diagnosis & MaintenanceTesting Equipment