PET-2215H-16 PoE Ethernet I/O Module, 16-ch High Speed RTD Input

PET-2215H is an Ethernet-connected RTD input module for engineers who need several temperature sensors read quickly and reliably. Each of its 8 channels can be set individually and supports Pt100, Ni120, Cu50 and Cu100 sensors, with 3-wire lead resistance compensation to keep readings accurate over longer cable runs. Open wire detection is available on every channel.The built-in 2-port Ethernet switch with LAN bypass allows modules to be daisy-chained along a network, reducing the number of switches and cable runs needed in the cabinet. The module can be powered from PoE (IEEE 802.3af, Class 1) or from a +10 ~ +48 VDC terminal block, and it is configured through a built-in web server.For noisy industrial sites, the module provides EMS protection (EFT, ESD and surge) and 3000 VDC I/O isolation. Its metal housing mounts on DIN-rail or wall, and it operates from -25 ~ +75 °C.ApplicationsFactory automationMachine automationBuilding automationRemote diagnosis and maintenanceTesting equipment

The ET-2215H-16 is an Ethernet I/O module for temperature measurement with 16 RTD inputs. Each channel can be configured individually and accepts Pt100, Ni120, Cu50 and Cu100 sensors. Fast Mode gives 90 Hz sampling per channel, while Normal Mode runs at 1.5 Hz per channel, so the module can be matched to the speed the application needs.Three-wire RTD lead resistance elimination keeps readings accurate across different cable lengths, and open wire detection flags broken sensor connections. The built-in 2-port 10/100 Base-Tx switch with LAN bypass lets engineers chain devices along the network, which reduces cabling and switch hardware. Modbus TCP/UDP, MQTT and SNMP V2c are supported, and the module can be configured through its web server.For electrically noisy plants, the module provides 3000 VDC I/O isolation and 1500 VDC Ethernet isolation, together with EFT, ESD and surge protection to the levels listed in the specification. It is housed in a metal casing and mounts on DIN-rail or wall.ApplicationsFactory AutomationMachine AutomationBuilding AutomationRemote Diagnosis & MaintenanceTesting Equipment

The ET-2215H is an Ethernet remote I/O module for engineers who need fast, accurate temperature readings from RTD sensors. Each of its eight channels accepts Pt100, Ni120, Cu50 and Cu100 sensors and can be configured individually. In Fast Mode each channel samples at 90 Hz, while Normal Mode runs at 1.5 Hz per channel.Three-wire lead resistance compensation keeps readings reliable when cable runs are long, and open wire detection flags a broken sensor connection on any channel. Accuracy is specified at ±0.05 % of FSR in Normal Mode and ±0.1 % of FSR in Fast Mode, both at 25 ℃, with a 16-bit resolution.The built-in 2-port switch with LAN bypass allows modules to be daisy-chained, reducing the number of switches needed in a panel. A built-in web server handles configuration, access is protected by password and IP filter, and firmware can be updated over Ethernet. Galvanic isolation is rated at 1500 VDC on Ethernet and 3000 VDC on I/O, and the module is specified for EFT, ESD and surge immunity to IEC 61000-4-4, -4-2 and -4-5.ApplicationsFactory AutomationMachine AutomationBuilding AutomationRemote Diagnosis & MaintenanceTesting Equipment

The PET-2217 CR is a PoE-powered Ethernet analog input module that accepts 8 differential or 16 single-ended channels. Each channel can be configured individually for voltage or current measurement, with ranges from ±150 mV up to ±10 V and 0 ~ +20 mA, +4 ~ +20 mA and ±20 mA. It suits engineers who need networked analog acquisition without a separate controller on the I/O side.Built-in protection covers overvoltage up to 120 VDC and overcurrent up to 50 mA at 110 VDC (max.), with 3000 VDC I/O isolation and EMS protection rated to IEC 61000-4-2, -4 and -5. The module has a 2-port 10/100 Base-Tx switch with LAN bypass, so units can be daisy-chained along a network line. It also provides a built-in web server, password and IP filter access control, and dual-watchdog support.For integration, the module supports Modbus TCP, Modbus UDP, MQTT and SNMP V2c. MQTT publishing and subscribing, with automatic reconnection and Keep-Alive, and SNMP Trap notifications on I/O changes or restarts help with remote monitoring and maintenance. Sampling can be set to 20 Hz normal mode or 200 Hz fast mode.ApplicationsFactory automationMachine automationBuilding automationRemote diagnosis and maintenanceTesting equipment