NSM-205PSE-24V PoE Ethernet Switch, 5-Port Unmanaged 10/100 Mbps (PSE)
Unmanaged 5-port 10/100 Mbps Ethernet switch with four IEEE 802.3af/at PoE PSE ports, metal casing and +12 to +32 VDC input for DIN-rail installation.
- Four IEEE 802.3af/at compliant PoE PSE ports plus one standard 10/100Base-TX port
- Up to 15.4 W per PoE channel
- Wide +12 VDC to +32 VDC input with reverse polarity protection
- Built-in boost for PoE where +48 VDC is not available
- Store-and-forward processing with 2K MAC table and 1 Mbit frame buffer memory
- IEEE 802.3x and back pressure flow control
€343.00 per piece
| 1-9 pcs | €343.00 | |
|---|---|---|
| 10-30 pcs | €326.00 | −5 % |
| 31+ pcs | €309.00 | −10 % |
Product information "NSM-205PSE-24V PoE Ethernet Switch, 5-Port Unmanaged 10/100 Mbps (PSE)"
NSM-205PSE-24V CR is an unmanaged industrial Ethernet switch with five 10/100Base-TX RJ-45 ports, four of which act as PoE PSE (power sourcing equipment) ports that supply power to connected powered devices over the data cable. Each PoE port delivers up to 15.4 W, so a single 24 VDC supply can power several remote devices from one central point.
The switch is intended for installations where a +48 VDC supply is not available. Its built-in boost stage allows the PoE ports to be fed from the wide +12 VDC to +32 VDC input range, which keeps the power architecture simple in cabinets and on DIN rails.
The metal casing, IP30 rating and operating range of -40 °C to +75 °C suit demanding industrial locations. Store-and-forward switching, IEEE 802.3x flow control and 1500 Vrms isolation complete the specification for reliable plant-floor networking.
Applications
- Powering PoE devices from a central 24 VDC supply
- Industrial Ethernet networks where a +48 VDC supply is not available
| Product type: | Ethernet switch |
|---|---|
| Interface: | 10/100Base-TX |
| Ports: | 5 |
| PoE: | 4 PSE (802.3af/at) |
| Isolation: | 1500 Vrms |
| Power input: | +12 ~ +32 VDC |
| Operating temperature: | -40 ~ +75 °C |
| Mounting: | DIN-rail |
| Housing: | Metal |
Specifications
| LED Indicators | |
|---|---|
| Status | Power, Link/Act, 10/100M, Power Device is detected |
| Ethernet | |
| Ports | 5 x RJ-45, 10/100Base-TX |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type | Store & forward |
| MAC Table | 2K |
| Frame Buffer Memory | 1Mbit |
| Flow Control | IEEE 802.3x flow control, back pressure flow control |
| Isolation | 1500 Vrms 1 minute |
| PoE Technology | |
| PoE Compliance | 100% IEEE 802.3af compliant |
| PoE Power | Up to 15.4 watts per channel |
| PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) |
| PoE Voltage | +48 VDC |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +32 VDC |
| Consumption | 0.24 A @ 24 VDC without PD loading 3.2 A @ 24 VDC with PD full loading |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 25 x 168 x 119 (W x L x H) |
| Installation | DIN-rail mounting |
| Ingress Protection Rating | IP30 |
| Environment | |
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Humidity | 10% ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Similar products
Centralised PoE power for an unmanaged industrial Ethernet segment. The NS-205PSE-24V CR switches traffic between five 10/100Base-TX ports, and four of those ports act as power sourcing equipment (PSE) to feed IEEE 802.3af/at powered devices. Each PSE port supplies up to 15.4 W, so a single DC supply within the +12 VDC to +32 VDC range can power remote endpoints without a separate local supply at each device.The switch suits sites where a +48 VDC PoE supply is not available. Store-and-forward processing, a 2K MAC table, a 1 Mbit frame buffer and IEEE 802.3x and back pressure flow control support reliable forwarding. Reverse polarity protection and an operating range of -40 °C to +75 °C add robustness for cabinet installations.Status LEDs show power, link and activity, 10/100M speed and PD detection, which simplifies commissioning and fault finding. The plastic casing mounts on a DIN-rail and measures 31 x 157 x 113 mm (W x L x H). The unit carries CE, UKCA, FCC, RoHS and WEEE marks.ApplicationsPowering PoE devices at remote points in industrial Ethernet networks from a 24 VDC supplyCentralised PoE power distribution where a +48 VDC PoE supply is not available
The NSM-208PSE-24V CR is an unmanaged industrial Ethernet switch that supplies power to attached devices over the network cable. All eight RJ-45 ports act as PoE power sourcing equipment (PSE), so one central supply can power PoE end devices alongside their data connections.Each port delivers up to 15.4 W and is 100% IEEE 802.3af compliant. The switch detects powered devices automatically and manages power per port, with over-temperature, over-current and over/under-voltage detection. Its +24 VDC input is boosted to the +48 VDC needed for PoE, which is useful where a +48 VDC supply is not available.The metal casing, DIN-rail or optional wall mounting and IP30 rating suit industrial installations. The operating range is -40 °C ~ +75 °C, and a relay alarm output rated 2 A @ 30 VDC is provided.ApplicationsCentralised power supply for PoE-powered Ethernet devices
The NSM-205GP is an unmanaged Gigabit Ethernet switch that combines four PoE+ ports with a fibre-ready uplink, so one industrial power supply can feed both data and power to nearby devices. Ports 1 to 4 act as power sourcing equipment (PSE) and deliver up to 30 W per channel to IEEE 802.3af/at powered devices.Voltage boost technology is designed to keep a full PSE voltage available on every PoE port when the switch runs from a 24 V industrial source, which helps when standard devices are placed at the far end of a cabinet or machine. Dual redundant +18 ~ +55 VDC inputs with reverse polarity protection and a relay alarm output add resilience to the power side of the installation.Suited to centralised PoE distribution in compact control panels and machine enclosuresStore-and-forward switching with an 8 K MAC table and jumbo frame support up to 10 K at 1000MApplicationsCentralised PoE power distribution to IEEE 802.3af/at powered devicesIndustrial Ethernet network segments in control panels and machine enclosuresInstallations supplied from 24 V or 48 V industrial DC power
The NSM-206PSE is an unmanaged 6-port Ethernet switch that acts as a Power Sourcing Equipment (PSE) on ports 1 to 4. It lets you centralise power for connected devices, so powered endpoints can be fed over the same cable as their data link, with up to 30 W per channel.Ports 1 to 4 are fully compliant with IEEE 802.3af and 802.3at, with automatic detection and power management. The unit runs from a redundant dual 12 to 57 VDC input with reverse polarity protection, and the store and forward switching architecture operates at wire speed with 10/100 Mbps auto negotiation on every port.The metal-cased switch mounts on a DIN rail or, optionally, on a wall, and is rated for an operating temperature of -40 °C to +75 °C. The ordering code CR variant is supplied with a metal case and is RoHS compliant.ApplicationsCentralised power distribution to IEEE 802.3af/at powered devices (PD)Industrial Ethernet networks requiring PoE from a DIN-rail mounted switch