ET-7252 Ethernet I/O Module with 2-port Switch, 8-ch DI and 8-ch DO

The ET-7052 CR is an Ethernet remote I/O module that combines eight wet-contact digital inputs, each usable as a 32-bit counter, with eight source-type digital outputs. Each output channel can drive a load of up to 650 mA, and the power-on and safe values of the outputs are programmable, so the module can be configured to hold a defined state if communication is lost.Its built-in web server and web HMI allow configuration and monitoring from a browser, while Modbus TCP and Modbus UDP provide straightforward integration with supervisory systems and controllers. Optical isolation rated at 2500 VDC on the I/O and 1500 VDC on the Ethernet side supports use where hazardous voltages are present, although channel-to-channel isolation is not provided.Suitable for building, factory and machine automation, remote maintenance and diagnosis, and test equipment, the ET-7052 CR mounts on a DIN rail and operates from a +10 ~ +30 VDC terminal block supply across a -25 ~ +75 °C operating range.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The PET-7052 CR is a PoE-powered Ethernet I/O module for engineers who need eight digital inputs and eight digital outputs on a Modbus network. Each input channel accepts wet contact signals and can count pulses with a 32-bit counter, while each output channel is a source-type driver rated for 650 mA per channel at 25°C.Output behaviour can be configured for start-up and fault conditions, with a programmable power-on value and safe value for each digital output. A built-in web server with Web HMI, access control by ID, password and IP filter, and dual watchdogs (module and communication) help with commissioning and supervision.Powered over Ethernet (IEEE 802.3af, Class 1) or from a 12 ~ 48 VDC terminal blockWet contact inputs with counter capability up to 500 HzSource-type outputs with short-circuit protectionThe module provides 2500 VDC optical isolation for transient overvoltage protection of the I/O, but does not offer channel-to-channel isolation. The manufacturer states it can be used where hazardous voltages are present.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The PET-7252 CR is a PoE Ethernet I/O module for remote monitoring and control of discrete signals. Its eight wet-contact digital inputs can each operate as a 32-bit counter, and its eight source-type digital outputs each switch up to 650 mA at 25°C, making it suited to driving field loads directly from the module.Each output channel has a programmable power-on value and safe value, so the outputs can be set to a defined state at start-up or during a communication fault. Optical isolation of 2500 VDC is provided between I/O and the module, although the channels are not isolated from one another. The source states the module can be used where hazardous voltages are present.Networking is handled by a 2-port 10/100 Base-TX switch with LAN bypass, which supports daisy-chain topologies. The module can be powered over PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and it is designed for DIN-rail mounting.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7250A is an Ethernet I/O module from the ET-7000/ET-7200 series that brings 12 digital inputs and 6 digital outputs onto a Modbus TCP/UDP network. Its built-in web server and Web HMI allow the I/O to be monitored and controlled from a browser, and the module can be read or driven by HMI, SCADA and PLC software over Ethernet.Each digital input accepts either dry or wet contact signals and can be configured as a 32-bit counter, with a maximum count of 4,294,967,295 and a frequency of 100 Hz. The six outputs are isolated open-collector, sink-type channels rated for 500 mA per channel, with programmable power-on and safe values.Two RJ-45 switch ports with LAN bypass allow the module to be daisy-chained along the Ethernet line without an external switch. Isolation is rated at 1500 VDC on Ethernet and 2500 VDC on I/O. The unit is powered from +12 ~ +48 VDC and is designed for DIN-rail mounting with an operating range of -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment