DN-37-AM/2 Female DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting
Female DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting. Include: CA-3720AM (DB37 Male to Female, with Moding case, 45º, 2M)
€85.00 per piece
| 1-9 pcs | €85.00 | |
|---|---|---|
| 10-30 pcs | €80.00 | −6 % |
| 31+ pcs | €76.00 | −11 % |
Product information "DN-37-AM/2 Female DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting"
Female DB37 to Screw Terminal Board (Pitch= 5.08 mm) with DIN-rail Mounting. Include: CA-3720AM (DB37 Male to Female, with Moding case, 45º, 2M).
Login
Similar products
The DN-37-A is a DIN-rail mounted terminal board that takes signals from a female DB37 D-sub connector and presents them on screw terminals with a 5.08 mm pitch. It suits engineers who want to wire field signals to a DB37-based I/O board without making individual cable terminations.The board carries two 37-pin D-sub connectors, one of which is provided for expansion, and two 19-pin screw terminal blocks. The DN-37-A CR ordering code includes a CA-3710A DB37 male-to-female cable, 45º, 1 m, so the board can be connected to a compatible DB37 device straight out of the box.Electrical ratings are 1 A maximum current, 50 V maximum DC rating and a dielectric withstanding voltage of 250 VAC for one minute. The board measures 144 mm x 72 mm and is rated for 0 ~ 60°C operation.ApplicationsField wiring termination for DB37-connected I/O signals
The DN-37-381 breaks out a 37-pin D-sub connection into screw terminals, giving engineers a convenient field-wiring point for DAQ daughter board signals. It provides one female DB37 connector and two 19-pin screw terminal blocks with a 3.81 mm pitch, mounted on a board designed for DIN-rail installation.This ordering code includes the CA-3710 cable, a 1 m DB37 male-to-male, 45º cable, so the board can be connected to a matching DB37 port without sourcing a separate lead. The board measures 99 mm x 82 mm.Rated for an operating temperature of 0 ~ 60°C and storage from -20 ~ 70°C, with 5% ~ 90% RH non-condensing humidity. Carries CE, UKCA, FCC, RoHS and WEEE certifications.ApplicationsBreaking out DB37 signals from DAQ daughter boards to screw terminalsField wiring in DIN-rail mounted control cabinets
The DN-37-381-A breaks out a 37-pin D-sub connection into two 19-pin screw terminal blocks with 3.81 mm pitch, mounted on a DIN rail. It gives engineers a practical way to connect field wiring to DB37-equipped data acquisition hardware without terminating individual wires at the D-sub connector.This ordering code includes a CA-3710A DB37 male-to-female cable, 45º, 1 m, so the board can be connected to a DB37 source straight away. The board measures 99 mm x 82 mm and is intended for DIN-rail installation.The board is rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, with 5% ~ 90% RH non-condensing humidity. It carries CE, UKCA, FCC, RoHS and WEEE markings.ApplicationsWiring field signals to DB37 data acquisition boardsPanel-mounted I/O connection in control cabinets
The DN-37 CR is a female DB37 to screw terminal board for wiring field signals to DB37-based data acquisition hardware. It provides two 37-pin D-sub connectors, one of which is intended for expansion, and two 19-pin screw terminal blocks with a 5.08 mm pitch, mounted on a DIN-rail.This ordering code includes a CA-3710 cable, a DB37 male-to-male, 45º, 1 m assembly, so the board can be connected to a compatible DB37 device straight out of the box. The board is rated for up to 1 A and 50 V DC, with a dielectric withstanding voltage of 250 VAC for one minute.Measuring 144 mm x 72 mm, the board is suited to control cabinets where a DIN-rail footprint is required. It is specified for an operating range of 0 ~ 60°C and carries CE, UKCA, FCC, RoHS and WEEE certifications.ApplicationsField wiring for DB37-based data acquisition boardsScrew terminal breakout in DIN-rail control cabinets