DB-8125 Screw Terminal Board for PCI-1802U, DB37 or Dual 20-pin Connector
Screw terminal board for the PCI-1802U data acquisition card, offering wiring access via one DB37 female connector or two 20-pin cable connectors. Supplied with a 1 m DB37 cable.
- Screw terminal breakout for the PCI-1802U data acquisition card
- Connection via one 37-pin female D-sub (DB37) or two 20-pin cable connectors
- Includes CA-3710 DB37 male to male cable, 45º, 1 m
- Board dimensions 221 mm x 115 mm
- Operating temperature 0~ +60 °C, storage -30 ~ +80 °C
- Humidity tolerance 10% ~ 90%, no condensing
€56.00 per piece
| 1-9 pcs | €56.00 | |
|---|---|---|
| 10-30 pcs | €53.00 | −5 % |
| 31+ pcs | €50.00 | −11 % |
Product information "DB-8125 Screw Terminal Board for PCI-1802U, DB37 or Dual 20-pin Connector"
DB-8125 CR is a screw terminal board that breaks out signals from the PCI-1802U data acquisition card to terminal blocks, so field wiring can be made without working directly on the card connector.
The board can be connected either through a single female DB37 D-sub connector or through two 20-pin cable connectors, giving engineers a choice of cabling arrangement depending on their panel layout. This CR version includes a CA-3710 cable, a DB37 male to male 45º assembly, 1 m long.
Rated for an operating range of 0~ +60 °C and a storage range of -30 ~ +80 °C, with humidity tolerance of 10% ~ 90%, non-condensing. Compliant with RoHS and WEEE requirements.
Applications
- Wiring field signals to the PCI-1802U data acquisition card
- Terminating DAQ card inputs and outputs in control cabinets
| Product type: | Screw terminal board |
|---|---|
| Interface: | DB37 or 2x 20-pin |
| Operating temperature: | 0~ +60 °C |
Specifications
| Mechanical | |
|---|---|
| Dimensions (mm) | 221 mm x 115 mm |
| Environment | |
| Operating Temperature | 0~ +60 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10% ~ 90%, no condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Similar products
DB-8025 CR is a screw terminal board that connects field wiring to a DAQ daughter board system through two 20-pin cable connectors, giving a practical wiring point between field signals and the cable interface.This ordering code includes two CA-2010 flat cables, each 20-pin and 1M long, so the board can be connected without sourcing cables separately. The board measures 114 mm x 102 mm.It is rated for operation from 0 ~ +60 °C and storage from -30 ~ +80 °C, at 10% to 90% humidity with no condensing. The product is RoHS and WEEE listed.ApplicationsField wiring termination for DAQ daughter board systems using 20-pin flat cables
The DB-8225 breaks out the 37-pin DB37 I/O connector of the A-82X and PCI-1800U series to a screw terminal board, so field wiring can be landed without custom cabling. It provides 16 single-ended or 8 differential channels, and the package includes a CA-3710 DB37 male-to-male cable (45º, 1M).Analog input channel 1 carries an on-board cold junction circuit, and the channel can be set to single-ended or differential mode by jumper. Solder pads allow break detection, low-pass filtering, current shunt and voltage attenuation to be added to the signal path where the application requires them.The board measures 170 mm x 114 mm and is rated for an operating temperature of 0~ +60 °C, a storage temperature of -30 ~ +80 °C and 10% ~ 90% humidity, non-condensing. It carries CE, UKCA, FCC and WEEE marks.ApplicationsWiring field signals to A-82X and PCI-1800U series data acquisition cards
DB-8225/2 is a female DB37 to screw terminal board that breaks out the 37-pin I/O connector of the A-82X series and PCI-1800U data acquisition cards to field wiring terminals. It gives 16 single-ended or 8 differential channels, so engineers can wire sensors directly to the terminals and connect them to the acquisition card through a single cable.The board includes blank pads for break detection, low-pass filtering, current shunt and voltage attenuation circuits, allowing signal conditioning to be added where the application requires it. An on-board cold junction circuit is fitted to analogue input channel 1, and jumpers select single-ended or differential mode for that channel.Supplied with a CA-3720 DB37 male-to-male cable, 45º, 2 mOperating temperature range 0 ~ +60 °C, storage -30 ~ +80 °CBoard size 170 mm x 114 mmApplicationsWiring field sensors and signals to A-82X series or PCI-1800U data acquisition cardsAnalogue input signal conditioning using the blank pad circuits
The DB-8225/2/DIN is a DIN-rail mounted screw terminal board that connects field wiring to A-82X series and PCI-1800U series data acquisition hardware through a female DB37 connector. It provides 16 single-ended or 8 differential analog input channels, selectable per channel by the user.The board includes blank pads for building break detection, low-pass filter, current shunt and voltage attenuation circuits. Analog input channel 1 carries an on-board cold junction circuit, and its single-ended or differential mode is set with a jumper.This ordering code includes a CA-3720 DB37 male-to-male cable (45°, 2 m) for the connection to the DAQ card. The base DB-8225 variant ships with a 1 m cable and is not DIN-rail mounted. Rated for 0 ~ +60 °C operation, with CE, UKCA, FCC and WEEE certification.ApplicationsField wiring termination for A-82X series data acquisition systemsField wiring termination for PCI-1800U series data acquisition cardsAnalog signal conditioning using the blank pad circuits