CAN-2015C CANopen Slave Module, 8-ch RTD Input
CANopen slave module with 8 RTD input channels for Pt100, Pt1000 and other sensor types. Conforms to CiA 301 v4.02 and CiA 401 v2.1, with an EDS file supplied.
- Eight RTD input channels supporting 2-wire or 3-wire connection, 16-bit resolution
- Supports Pt100, Pt1000, Ni120, Cu100, Cu1000 and JPt100 sensor types
- CANopen slave per CiA 301 v4.02 and CiA 401 v2.1, Node ID 1 ~ 99, baud rate 10 k ~ 1 M
- Default EDS file supplied; passed CiA CANopen Conformance Test tool validation
- 10 RxPDO and 10 TxPDO with Dynamic PDO support and multiple PDO transmission modes
- Open wire detection and individual channel configuration
343,00 EUR per piece
| 1–9 pcs | 343,00 EUR | |
|---|---|---|
| 10–30 pcs | 332,00 EUR | −3 % |
| 31+ pcs | 325,00 EUR | −5 % |
Termékinformációk "CAN-2015C CANopen Slave Module, 8-ch RTD Input"
The CAN-2015C CR connects eight RTD sensors to a CANopen network as a slave device. Each channel accepts 2-wire or 3-wire RTD sensors, with 16-bit resolution and an accuracy of +/-0.05% FSR. Engineers can read RTD values or configure the module over standard CANopen messaging.
The module follows CiA 301 v4.02 and CiA 401 v2.1 and has passed validation with the CiA CANopen Conformance Test tool. A default EDS file is provided, so it can be added to a standard CANopen master with minimal configuration effort. It also works with the CANopen masters offered by ICP DAS.
Diagnostic and protection features include open wire detection, individual channel configuration, a built-in 120Ω terminal resistor and 4 kV contact ESD protection on each channel. The unit runs from +10 ~ +30 VDC and is intended for DIN-rail mounting, with an operating range of -25 ~ +75 °C.
Applications
- Industrial machine control
- Factory automation
- Packaging machine control
- Remote data acquisition
- Environmental monitoring
- Vehicle control systems
- Medical equipment control
| Product type: | Fieldbus I/O module |
|---|---|
| Interface: | CAN bus |
| Protocol: | CANopen |
| Analog inputs: | 8 |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| Watchdog Timer | Hardware watchdog |
| LED Indicators | |
| Status | 3 LEDs to PWR, RUN and ERR |
| Analog Input | |
| Channels | 8 channels for 2-wire or 3-wire RTD |
| Sensor Type | Pt100, Pt1000, Ni120, Cu100, Cu1000, JPt100 |
| Resolution | 16-bit |
| Accuracy | +/-0.05% FSR |
| Sampling Rate | 10 Samples/Sec. (Total) |
| Input Impedance | 20 MΩ |
| Common Mode Rejection | 150 dB |
| Normal Mode Rejection | 100 dB |
| Overvoltage Protection | 120 VDC / 110 VAC |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes |
| Zero Drift | +/- 0.5 μV/ °C |
| Span Drift | +/- 20 ppm/ °C |
| Isolation | 3000 V DC-DC, 3000 Vrms photo-coupler |
| CANopen | |
| Baud Rate | 10 k ~ 1 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Built-in 120Ω |
| Protocol | CiA 301 v4.02, CiA 401 v2.1 |
| Node ID | 1 ~ 99 |
| No. of PDOs | 10 RxPDO , 10 TxPDO |
| PDO Mode | Event-triggered, remotely-requested, Cyclic and acyclic SYNC |
| Error Control | Node Guarding protocol / Heartbeat Producer |
| NMT | Slave |
| EMCY Message | Yes |
| Power | |
| Consumption | 1.5 W |
| Mechanical | |
| Dimensions (mm) | 33 x 99 x 78 ( W x L x H ) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Bejelentkezés