GPS Product
The GPS-721 CR is a DIN-rail GPS receiver module for remote positioning and timing. It tracks 66 GPS channels and outputs NMEA 0183 v3.01 data at 9600 bps, while its RS-485 port works with the DCON protocol and its RS-232 port can use either NMEA or DCON. This lets it sit on a serial network or feed a single host directly.Beyond position data, the module provides a 1 PPS output, with a default 100 ms pulse each second, for precise timekeeping and time measurement. It also includes one non-isolated open-collector digital output (sink type), so the PPS function can serve as a time synchronisation source alongside the serial interfaces. Status LEDs show power and communication along with three GPS indicators.The unit accepts 10 to 30 VDC with reverse polarity protection and operates from -25 to +75 °C. The ordering code includes a 5 m GPS antenna (ANT-115-03). Per the source listing, this ordering code is marked Asia only, and the module carries FCC, RoHS and WEEE certification marks.ApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement
The GPS-721-MRTU is a remote GPS receiver module that delivers position data over RS-232 or RS-485 using NMEA 0183, DCON or Modbus RTU. Its 66-channel tracking and MediaTek chipset suit engineers who need reliable positioning data inside a compact DIN-rail enclosure.Timing and I/O: A 100 ms PPS pulse per second output supports precise timekeeping and time measurement, and the PPS function can be combined with another source for time synchronisation. A single open-collector digital output is also provided for general-purpose switching.The module accepts a 10 to 30 VDC non-regulated supply with reverse polarity protection and operates from -25 to +75 °C. A 5 m GPS antenna (ANT-115-03) is included with this ordering code.ApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement
The GPS-721U-MRTU CR is a GPS/GLONASS receiver module built around a u-blox solution. It reports position over RS-232 or RS-485 using NMEA 0183, DCON or Modbus RTU, so it can feed a host controller, PLC or SCADA system without a separate protocol converter.Beyond positioning, the module adds a digital output and a pulse-per-second (PPS) signal. The default PPS output is a 100 ms pulse each second, which can be used for precise timekeeping, time measurement and as a time synchronisation source. The GNSS system selection is made in DCON Utility Pro, with a power cycle required for the change to take effect.This ordering code includes a 5 m GPS antenna (ANT-115-03-02). Status LEDs show power and communication activity as well as GNSS status, and the module runs from a non-regulated +10 to +30 VDC supply over an operating range of -25 to +75 °C.ApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement
The GPS-721U-MRTU-UTA is a compact GPS/GLONASS receiver module for engineers who need satellite position and time data delivered over serial links. Position data is output in NMEA 0183 format, while the RS-232 and RS-485 ports can also be configured for DCON or Modbus RTU, so the module can be integrated into existing control architectures without a protocol converter.Beyond position reporting, the module provides a dedicated 1 PPS output that emits a 100 ms pulse every second by default. This makes it suitable for time synchronisation and time measurement tasks, and the PPS function can be combined with another time source. A separate digital output channel is also fitted, giving additional discrete signalling alongside the GNSS data.The -UTA variant is intended for applications with a -40 ℃ requirement and operates from -40 ~ +75°C. The module is supplied with a 5 m GPS antenna (ANT-115-03-02). Use DCON Utility Pro to select the GNSS system; changes take effect after the module is powered off and on again.ApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement
GPS Receiver.
I-8211W-G is a GPS/GLONASS receiver module that gives a LinPAC controller a precise time reference from satellite signals. Once fitted, the controller can take its time from the satellites rather than relying on its real-time clock alone, which keeps timestamps accurate over time.The module plugs into any slot of the LinPAC (LX-8x31 and LP-8x21 series). The controller launches the application automatically and acquires GPS or GLONASS time, bringing the time error under 1 ms. The module is preset to GPS, and the LinPAC settings can be changed to use GLONASS instead. Satellite support also includes SBAS (WAAS, EGNOS, MSAS).Suited to satellite time correction and precise timekeeping or time measurement on LinPAC systemsApplicationsSatellite time correctionPrecise timekeeping and time measurement
The I-87211W-G CR adds GPS positioning and precise timing to ICP DAS PACs and remote I/O expansion units. It tracks 32 GPS channels and outputs position data in NMEA 0183 v3.01 format at 9600 bps over an RS-232 port, which can also be set to DCON protocol.Beyond the GPS receiver, the module provides a PPS output for timekeeping and time measurement, and two extra digital outputs for general-purpose switching. The PPS signal is delivered as a 100 ms pulse each second by default and can serve as a time synchronisation source alongside other timing inputs in the system.Mounts on DIN rail with a 5 m GPS antenna (ANT-115-03) included in this ordering codeGray cover variant (CR); the product page lists RoHS and WEEE complianceApplicationsAutomotive navigationPersonal positioning and navigationMarine navigationSatellite time correctionPrecise timekeeping and time measurement