Module

The BG96 CR is an LPWA communication module combining LTE Cat M1, LTE Cat NB1 and EGPRS in one device. It is built on the standard Mini PCI Express card format, so manufacturers can add cellular connectivity to their own designs without a custom board layout.On LTE the module supports up to 375 Kbps downlink and 375 Kbps uplink. Its global frequency band coverage spans 2G GPRS bands at 850/900/1800/1900 MHz and a broad set of FDD LTE bands, with B39 TDD available for Cat M1. Ultra-low power consumption is a key design point for battery-powered or power-constrained devices.For teams replacing an existing design, the module offers a migration route from GSM/GPRS, UMTS/HSPA and LTE modules. It operates from -35°C to +75°C and carries RED, FCC, RoHS and WEEE certification markings. Region of production is China.ApplicationsOEM integration of cellular connectivity into devicesLow-power wide-area (LPWA) IoT devices

EC20-CE CR is a 4G LTE Category 4 module aimed at machine-to-machine and IoT deployments. It uses the 3GPP Release 11 LTE feature set and comes in the standard Mini PCIe card format, so it can be fitted into a host device as a cellular communication module without a custom board layout.On LTE it provides up to 150 Mbps downlink and 50 Mbps uplink. Because it is backward-compatible with EDGE and GSM/GPRS networks, the module can still connect in remote areas that have no 4G or 3G coverage. Supported LTE bands are FDD B1/B3/B8 and TDD B38/B39/B40/B41, with WCDMA 900/2100 MHz and GSM 900/1800 MHz for legacy networks.The operating range is -35 to +75 °C, with storage from -40 to +85 °C. The module holds CCC, RoHS and WEEE certification and is listed as produced in China.ApplicationsM2M communicationIoT devices and gatewaysRemote sites with limited or no 4G or 3G coverage

EC21-AU CR is a low-power LTE category 1 module designed for M2M and IoT products that need economical, efficient cellular connectivity. It supports up to 10 Mbps downlink and 5 Mbps uplink on 4G LTE, which suits applications where data rate is less important than a stable, reliable network connection.The module uses the standard PCI Express Mini Card (Mini PCIe) form factor, so it can be fitted into a device design without a custom interface. Its 4G coverage spans FDD LTE bands B1, B2, B3, B4, B5, B7, B8 and B28 plus TDD LTE band B40. For legacy networks it also provides 3G WCDMA on 850/900/1900/2100 MHz with DC-HSPA+ up to 42 Mbps downlink, and 2G GPRS/EGPRS on 850/900/1800/1900 MHz.The compact module measures 30.0 x 51.0 x 4.9 mm (W x L x H) and operates from -35 °C to +75 °C, with storage rated from -40 °C to +85 °C. It is certified to FCC, RoHS and WEEE requirements and is produced in China.ApplicationsM2M and IoT devicesApplications where network rate is not critical but a stable, reliable LTE connection is requiredBroadband IoT products needing cellular connectivity

EC25-E CR is an LTE Cat 4 communication module for engineers adding cellular connectivity to M2M and IoT equipment. Its standard Mini PCIe card format lets manufacturers integrate wireless connectivity into their devices without a custom carrier design.The module supports LTE FDD bands B1, B3, B5, B7, B8 and B20 and TDD bands B38, B40 and B41, with up to 150 Mbps downlink and 50 Mbps uplink. Backward compatibility with GSM/GPRS and EDGE networks keeps the link available where 4G or 3G coverage is absent.The EC25-E CR carries RED, RoHS and WEEE certification and is rated for an operating temperature of -35 °C to +75 °C, with storage from -40 °C to +85 °C. Board dimensions are 30.0 x 51.0 x 4.9 mm (W x L x H).ApplicationsM2M communicationIoT applicationsBroadband IoT devicesRemote devices in areas without 4G or 3G coverage

The FN990A28 CR is a 5G/LTE data card module in the standard M.2 form factor, aimed at engineers building M2M and IoT equipment that needs cellular connectivity on a compact board-level module.It implements 3GPP Release 16 and supports both 5G NSA and 5G SA operation, together with EN-DC. Because it remains backward compatible with existing GSM/GPRS networks, it can be specified where legacy coverage is still part of the deployment.Peak rates are 3.4 Gbps DL / 0.46 Gbps UL in 5G NSA and 2.5 Gbps DL / 0.90 Gbps UL in 5G SA. The module operates from -40 °C to +85 °C and is rated for RED, FCC, CCC, RoHS and WEEE.ApplicationsM2M applicationsIoT applications

The LE910C4-WWX CR is an LTE Cat-4 module in the standard Mini PCIe data-card form factor, optimised for low-category LTE networks. It offers LTE downlink of up to 150 Mbps and uplink of up to 50 Mbps, with 3G DC-HSPA+ and 2G GPRS fallback across the listed frequency bands.Engineers can connect peripherals and actuators through USB 2.0 HS, UART and user-definable GPIOs. Integrated TCP/IP and UDP/IP stacks support internet-connected designs without a separate networking layer in the host application.The module measures 51 x 30 x 3.2 mm (W x L x H) and is rated for operation from -35 °C to +75 °C, with storage from -40 °C to +85 °C. It carries RED, UKCA, FCC, RoHS and WEEE certification marks.ApplicationsCellular connectivity for embedded peripherals and actuatorsInternet-connected equipment requiring LTE data links

The LE910C4-WWXD CR is an LTE Cat-4 cellular module in the standard Mini PCI Express card format. It suits machine-to-machine and Internet of Things designs where a compact, ready-to-integrate LTE link is needed. Its LTE band support is complemented by GSM/GPRS and WCDMA/DC-HSPA+ fallback, with downlink rates of up to 150 Mbps on LTE.Integration is straightforward. The module connects to peripherals and actuators through USB 2.0 High Speed, UART and user-definable GPIOs, and includes integrated TCP/IP and UDP/IP stacks so that data can be sent over the network without a separate protocol stack. The module is rated for an operating temperature range of -35°C to +75°C.The ordering code LE910C4-WWXD CR is supplied as an LTE Cat-4 module carrying RoHS compliance. Certifications listed for the module are RED, UKCA, FCC, RoHS and WEEE.ApplicationsM2M applicationsIoT applications

The MV31-W CR is a 5G modem card for IoT designs that need high-speed mobile broadband. It supports Stand Alone (SA) and NSA operation and can fall back to 4G LTE and 3G networks where 5G coverage is limited.Its single SKU covers global 5G bands, including sub 6 GHz operation, so one card can serve multiple regions. The compact standard M.2 30x42 form factor with PCIe 3.0 makes it straightforward to fit into existing industrial router, gateway and computer designs.Suited to industrial routers and gateways, digital signage, industrial computers and tablets.Operating temperature range of -30°C ~ +70°C, with storage up to +85°C.Certified to RED, FCC, RoHS and WEEE.ApplicationsIndustrial routers and gatewaysDigital signageIndustrial computers and tablets

RM500Q-AE CR is a 5G/4G/3G multi-mode module in an M.2 form factor, aimed at engineers building IoT and eMBB designs that need Sub-6 GHz 5G connectivity. It supports both NSA and SA 5G operation, with LTE-A coverage across its listed bands.The module covers WCDMA bands B1 to B8 and B19, a broad list of LTE-FDD and LTE-TDD bands, and n1 to n79 in the 5G New Radio range, including n48 as marked in the source data. The CR ordering variant is listed for Asia only, except China.At 30.0 x 52.0 x 2.3 mm (W x L x H), the module suits compact embedded hardware. It is rated for an operating temperature of -30°C to +70°C and a storage temperature of -40°C to +90°C. Certifications listed for this model are RED, FCC, RoHS and WEEE.ApplicationsIoT applicationseMBB applications

The RM500Q-GL CR is a compact 5G/4G/3G multi-mode module in an M.2 form factor, built for IoT and eMBB designs where engineers need 5G connectivity on a small board footprint. It supports both 5G non-standalone (NSA) and standalone (SA) operation, giving integrators flexibility in how they deploy it.The module covers a broad set of WCDMA, LTE-FDD, LTE-TDD and 5G NR bands, as listed on the product page, and is rated for an operating range of -30 °C to +70 °C. This is the Asia-only variant, and the source lists China as the region of production.Key checks before specifying: confirm the required band plan against the lists provided, and note the certifications stated for this variant (RED, CCC, RoHS and WEEE).ApplicationsIoT applicationseMBB applications