PCIe-ENCODER300 PCI Express 3-axis Encoder Input Card, 4 MHz
PCI Express x1 card for three encoder axes, each with a true 32-bit counter running up to 4 MHz, plus 8 digital outputs isolated at 2500 Vrms.
- Three encoder axes, each with a true 32-bit counter
- Encoder counting rate up to 4 MHz (max.)
- Selectable Quadrant, CW/CCW and PULSE/DIR counting modes
- Third-order internal digital filter on encoder inputs
- Register, index (C channel) and hardware (HR1 to HR6) counter reset
- 6 digital inputs and 8 digital outputs, 2500 Vrms optical isolation
353,00 € per piece
| 1–9 pcs | 353,00 € | |
|---|---|---|
| 10–30 pcs | 342,00 € | −3 % |
| 31+ pcs | 335,00 € | −5 % |
Informace o výrobku "PCIe-ENCODER300 PCI Express 3-axis Encoder Input Card, 4 MHz"
The PCIe-ENCODER300 is a PCI Express x1 motion input card for PC-based and remote motion systems. It provides three independent encoder channels, and each axis has its own true 32-bit counter capable of counting up to 4 MHz.
Each axis can be set to Quadrant, CW/CCW or PULSE/DIR counting mode. Counters can be cleared by register command, by the index (C channel) signal once per revolution, or by an external hardware reset input (HR1 to HR6). The HR1 to HR6 inputs can also be read as digital inputs when not used for reset.
- 6 digital inputs, optically isolated at 2500 Vrms
- 8 digital outputs, optically isolated at 2500 Vrms
- 68-pin SCSI-II female connector
Device drivers and function libraries are supplied for DOS, Windows 7 and Windows XP/2000, and the card is listed for Windows 11 and Windows 10 in the software specification. An operating temperature range of 0 ~ +60 °C suits typical cabinet and industrial PC environments.
Applications
- Semiconductor Manufacturing
- Component Inspection
- Manufacturing Quality Control
- Food and Beverage Inspection
- Microscopy and Medical Imaging
- Biometrics Applications
- X-Y-Z Table
- Fix-pitch Stamping Machinery
- Transfer Machinery
- Spinner
- Load/Unload
| Product type: | Encoder input card |
|---|---|
| Interface: | PCI Express x1 |
| Digital inputs: | 6 |
| Digital outputs: | 8 |
| Isolation: | 2500 Vrms |
| Power input: | +12 V @ 200 mA, +3.3 V @ 500 mA |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Software | |
|---|---|
| OS Support | Windows 11 64-bit Windows 7/10 32/64-bit Windows XP/2000 32-bit |
| SDK | DOS 6.2 , Linux 2.6 Labview 8.5 and above |
| Hardware | |
| Connector | 68-pin SCSI-II Female |
| General | |
| No. of Axes | 3 |
| Encoder Input | |
| Mode | Quadrant, CW/CCW, PULSE/DIR |
| Counting Rate | 4 MHz (Max.) |
| Pulse Output | |
| Counter Width | 32-bit |
| Digital Input | |
| Channels | 6 |
| Isolation | 2500 Vrms optical isolation |
| Digital Output | |
| Channels | 8 |
| Isolation | 2500 Vrms optical isolation |
| PC Bus | |
| Type | PCI Express x 1 |
| Power | |
| Consumption | +12 V @ 200 mA +3.3 V @ 500 mA |
| Mechanical | |
| Dimensions (mm) | 120.4 mm x 90.8 mm |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Přihlásit