Skip to main content Skip to search Skip to main navigation

XV310 Multifunction Expansion Board, 4 AI / 2 AO / 4 DI / 4 DO

Product information "XV310 Multifunction Expansion Board, 4 AI / 2 AO / 4 DI / 4 DO"

XV310 CR adds mixed analogue and digital I/O to a PAC system from a single expansion board. Each of the four analogue inputs can be set to its own range, from ±1 V up to ±10 V, ±20 mA, 0 ~ 20 mA or 4 ~ 20 mA, with 16-bit resolution. The two analogue outputs provide 12-bit resolution in ±5 V, ±10 V, 0 ~ 20 mA or 4 ~ 20 mA. Voltage or current operation is selected by jumper.

The four digital inputs are dry-contact type and can also be used as 32-bit counters. The four digital outputs are PNP source type, rated for +10 to +40 VDC at 650 mA per channel, with overload and short-circuit protection. Power-on output values are programmable, so outputs can be set to a defined state at start-up.

Protection features include 120 VDC overvoltage protection on the analogue inputs and 60 VDC on the digital inputs, with 2000 VDC intra-module isolation. The board communicates through one RS-232 port at 115200 bps using Modbus/RTU, and is rated for operation from -25 ~ +75 °C.

Applications

  • Mixed analogue and digital I/O expansion for PAC systems
  • Sensor and actuator interfacing using dry-contact inputs and PNP outputs
  • Pulse or event counting on digital input channels
Product type: Expansion Board
Interface: RS-232
Protocol: Modbus/RTU
Digital inputs: 4
Digital outputs: 4
Ports: 1
Isolation: 2000 VDC
Power input: 5 VDC
Operating temperature: -25 ~ +75 °C

Specifications

Isolation
Intra-module Isolation2000 VDC
EMS Protection
ESD (IEC 61000-4-2)±4 kV Contact For Each Terminal
±8 kV Air For Random Terminal
Analog Input
Channels4
Type±1 V, ±2.5 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution16-bit
AccuracyNormal Mode: ±0.1 %
Fast Mode: ±0.5 %
Sampling RateNormal Mode: 10 Hz
Fast Mode: 200 Hz (Total)
Overvoltage Protection120 VDC
Individual Channel ConfigurationYes
Analog Output
Channels2
Type0 V ~ +5 V, ±5 V, 0 V ~ +10 V, ±10 V, 0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable)
Resolution12-bit
Accuracy±0.1%
Voltage Output Capability10 V @ 20 mA
Current Load Resistance500 Ω
Individual Channel ConfigurationYes
Digital Input/Counter
Channels4
TypeDry Contact
Sink/Source (NPN/PNP)Source
ON Voltage LevelClose to GND
OFF Voltage LevelOpen
Max. Counts32-bit (0~4,294,967,285)
Frequency50 Hz
Min. Pulse Width10 ms
Overvoltage Protection60 VDC
Digital Output
Channels4
Sink/Source (NPN/PNP)Source
Load Voltage+10 to +40 VDC
Load Current650 mA/channel
Overvoltage Protection47 VDC
Overload ProtectionYes
Short-circuit ProtectionYes
Power on ValueYes, Programmable
COM Ports
Ports1 x RS-232
Baud Rate115200 bps
Data FormatN, 8, 1
ProtocolModbus/RTU
Power
Consumption1.6 W Max.
Powered from Terminal Block5 VDC
Mechanical
Dimensions (mm)59 mm x 82 mm x 13 mm (W x L x H)
Environment
Operating Temperature-25 ~ +75 °C
Storage Temperature-30 ~ +80 °C
Humidity10 ~ 90% RH, Non-condensing

Specifications as published by the manufacturer. Subject to change.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.