VXC-148U/D2 Universal PCI Serial Board, 8 x RS-422/485 Ports
PCI serial communication board providing eight RS-422/485 ports, each with a 256-byte hardware FIFO and baud rates up to 115200 bps, for connecting serial devices to a PC.
- Eight RS-422/485 serial ports on one universal PCI card
- 256-byte hardware FIFO for each port
- Supports full-duplex communication at up to 115200 bps
- Supports 3.3 V and 5 V PCI bus
- Automatic COM port number assignment, or software-controlled port selection
- Short card design
€273.00 per piece
| 1-9 pcs | €273.00 | |
|---|---|---|
| 10-30 pcs | €259.00 | −5 % |
| 31+ pcs | €245.00 | −10 % |
Product information "VXC-148U/D2 Universal PCI Serial Board, 8 x RS-422/485 Ports"
The VXC-148U/D2 CR is a universal PCI serial communication board that adds eight RS-422/485 ports to a computer. Each port has its own 256-byte hardware FIFO and supports full-duplex communication at up to 115200 bps, making it suited to engineers who need multiple serial links from a single PCI slot.
The card supports both 3.3 V and 5 V PCI bus signalling and can assign COM port numbers automatically, or allow them to be selected under software control. Its short card design suits compact PC builds. Typical peripherals include bar code readers, serial printers, intelligent sensors and instrumentation equipment.
Key specifications
- Connector: female DB-62, supplied with a CA-PC62M D-Sub connector in the standard listing
- Baud rate: 50 - 115200 bps
- Data bits: 5, 6, 7, 8; stop bits: 1, 1.5, 2
- Parity: none, even, odd, mark, space
- Power consumption: 120 mA @ 5 V
The price list description for this ordering code refers to a CA-9-6210 cable in place of the CA-PC62M connector, so check the included accessories against your cabling requirements before ordering.
Applications
- Industrial machinery
- Building automation
- Restaurant appliances
- Laboratory equipment and research
- Industrial communication
| Product type: | PCI serial communication board |
|---|---|
| Interface: | PCI |
| Protocol: | RS-422/485 |
| Ports: | 8 |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB-62 |
| COM Ports | |
| Ports | 8 x RS-422/485 (RS-422: TxD+, TxD-, RxD+, RxD-, GND / RS-485: Data+, Data-, GND) |
| Baud Rate | 50 - 115200 bps |
| Parity | None, Even, Odd, Mark, Space |
| Data Bit | 5, 6, 7, 8 |
| Stop Bit | 1, 1.5, 2 |
| FIFO Size | Internal 256 bytes |
| Power | |
| Consumption | 120 mA @ 5 V |
| Mechanical | |
| Dimensions (mm) | 85.4 x 119.9 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login
Accessories
![CA-9-6210 DB62 Male to 8 x DB9 Male Cable [RS-232], 1M](https://icpdas-tech.eu/media/5b/d3/8d/1793281479/CA-9-6210-CA-9-6210_la01.webp?ts=1793281479 "CA-9-6210 DB62 Male to 8 x DB9 Male Cable [RS-232], 1M")
DB62 Male to 8 x DB9 Male Cable [RS-232], 1M.
DB9 connector Female with plastic cover (Solder Type).
DN-09-2F CR is a DIN-rail breakout board that brings the signals of two male 9-pin D-sub connectors out to screw terminals, so field wiring can be connected without custom cabling. Each DB9 pin maps directly to its corresponding screw terminal.The ordering code includes two CA-0910F cables, each a 1 m DB9 female to DB9 female cable wired for RS-232 (Pin1-Pin9), allowing the board to be connected straight to a compatible DB9 port. The board measures 103 mm x 86 mm and mounts on a DIN rail with a 5.08 mm terminal pitch.Rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, at 5% ~ 90% RH non-condensing. Certified CE, UKCA, FCC, RoHS and WEEE.ApplicationsBreaking out D-sub I/O to screw terminals on a DIN rail
Similar products
VXC-148U CR adds eight RS-422/485 serial ports to a PC through a single universal PCI card. Each port has its own 256-byte hardware FIFO, which helps buffer incoming and outgoing data when the host is busy, and speeds range from 50 to 115200 bps with full-duplex operation.The card suits engineers who need to connect several serial devices such as barcode readers, serial printers, intelligent sensors and instrumentation to one host. COM port numbers can be assigned automatically by the driver or selected under software control, which simplifies integration into existing applications. The short card design and 3.3 V/5 V PCI bus support broaden the range of host systems it can fit.Each unit ships with one CA-PC62M D-Sub connector. The DB-62 female connector carries the port signals, with RS-422 and RS-485 pinouts documented in the specification. Data bits, parity and stop bit options cover the common serial framing formats.ApplicationsIndustrial MachineryBuilding AutomationRestaurant AppliancesLaboratory Equipment & ResearchIndustrial Communication
The VXC-142iAU CR adds two RS-422/RS-485 serial ports to a PC through a universal PCI slot. Each port can be set to RS-485 for half-duplex or RS-422 for full-duplex operation, with speeds up to 115200 bps.The i version isolates the data lines with on-board photocouplers, keeping the serial channels electrically separated from the host. This helps reduce ground loops and common-mode voltage problems, and the 2500 VDC isolation and ±4 kV ESD protection add robustness where electrical noise and voltage spikes are a concern.COM port numbers can be fixed with an 8-bit DIP switch or left to the driver, which assigns an available number automatically. Under Windows the driver provides up to 128 KB of software buffer per port, backed by a 128-byte hardware FIFO, which suits large file transfers.ApplicationsIndustrial machineryBuilding automationRestaurant appliancesLaboratory equipment and researchIndustrial communication
The VXC-112AU CR is a short-card universal PCI board that adds two RS-232 serial ports to a host PC. It suits engineers who need dedicated serial connections for bar code readers, serial printers, intelligent sensors and instrumentation that communicate over RS-232.Each port has a 128-byte hardware FIFO and supports full-duplex communication at up to 115200 bps. The card works with both 3.3 V and 5 V PCI bus signalling. COM port numbers can be set manually using the built-in 8-bit DIP switch COM-Selector, or the driver can assign an available number automatically. Under Windows, the driver provides up to 128 KB of software buffer per COM port, which helps with large file transfers.Each port's data lines are standard RS-232 with no isolation on this variant. For isolated and ESD-protected data lines, the i versions of the VXC-112 series, such as the VXC-112iAU, should be considered. The board is rated for 0 ~ +60°C operation and is CE, UKCA, FCC, RoHS and WEEE listed.ApplicationsIndustrial MachineryBuilding AutomationRestaurant AppliancesLaboratory Equipment & ResearchIndustrial Communication
VXC-114U CR is a universal PCI serial communication board that adds four RS-232 ports to a host PC. It suits engineers who need to connect several serial devices such as bar code readers, serial printers, intelligent sensors and instrumentation to a single computer.Each port has a 128-byte hardware FIFO and supports baud rates from 50 to 115200 bps with full-duplex communication. Under Windows, the driver provides a software buffer of up to 128 KB per COM port, which helps with large file transfers. The COM port number can be set manually with the built-in 8-bit DIP switch selector, or left to the driver to assign automatically.This is the non-i version of the card, so the isolation and ESD protection features are those of the i versions and are not part of this model. The board supports 3.3 V and 5 V PCI bus signalling and uses a short card design. One CA-4002 connector is included.ApplicationsIndustrial MachineryBuilding AutomationRestaurant AppliancesLaboratory Equipment & ResearchIndustrial Communication