U-7567M OPC UA I/O Module, 8-ch Power Relay with 2-port PoE Ethernet Switch

The U-7560M is an OPC UA I/O module for engineers who need digital inputs and relay outputs on an Ethernet network without a separate gateway. It provides six wet-contact digital inputs and six Form A power relays, and can publish I/O values to a cloud platform or field control system for display, analysis or control strategy.Communication options include an OPC UA Server or Client, an MQTT Client and a RESTful API over HTTP or HTTPS. These can run at the same time, so a single module can serve several systems. Logic rules using IF, THEN and ELSE conditions can act on physical I/O and virtual points, and scheduled execution runs rules at set times.A built-in dual-port switch allows daisy-chain wiring, reducing cable and switch requirements. The module accepts IEEE 802.3af (Class 3) Power over Ethernet or a +12 ~ +48 VDC terminal block supply, and is configured through a built-in web interface with no additional app required. It mounts on a DIN rail.ApplicationsTransmitting digital input status to cloud or field control systems for display, analysis or control strategyRemote switching of loads through relay outputs over an Ethernet networkDevice tracking through I/O trigger messages logged to CSV file or LineDaisy-chained I/O distribution in systems where cabling and switch count need to be reduced

U-7561M is a networked I/O module that switches 11 power relay channels and reports their status over OPC UA, MQTT and RESTful API. Its built-in dual-port Ethernet switch lets you pass the network through the module in a daisy-chain, which reduces cabling and the need for separate switch ports.The module can receive power from a PoE-enabled network (IEEE 802.3af, Class 3) or from a +12 ~ +48 VDC terminal block. Each relay is Form A (SPST N.O.) rated 5 A @ 250 VAC/24 VDC for resistive loads, with programmable power-on and safe values.Configuration, control and monitoring are handled through a built-in web interface in a browser. Logic rules (IF, THEN, ELSE), scheduled actions and I/O trigger messages can run locally, and OPC UA, MQTT and RESTful API can be used at the same time.ApplicationsRemote switching of loads over an Ethernet networkPassing I/O values to cloud or field control systems for display, analysis or control strategy

U-7502M CR is a remote I/O unit that brings analogue, digital and relay channels onto an Ethernet network and makes them available to OPC UA, MQTT and RESTful API clients. It suits engineers who need to feed field I/O values into a cloud platform or a higher-level control system without adding a separate gateway.The module can run OPC UA Server or Client, MQTT Client and RESTful API communication at the same time, so the networking approach can be chosen to suit each installation. Local logic is handled by IF, THEN, ELSE rules that can act on physical and virtual points, and a schedule function executes rules at set times. Analogue inputs can be scaled into more readable engineering values, and I/O trigger messages can be written to CSV files or a line for device tracking.Power can be taken from a PoE network under IEEE 802.3af Class 3 or from a +12 to +48 VDC terminal block. A dual-port Ethernet switch supports daisy-chain topology to reduce cabling and switch requirements. Configuration, control and monitoring are done through the built-in web interface in a standard browser, with no additional app required.ApplicationsTransmitting I/O values to cloud systems for display, analysis or strategyFeeding field I/O data into a control system over OPC UA or MQTTRemote monitoring and control of I/O via a web browser or RESTful APILocal rule-based automation of I/O and virtual points on a scheduleInstallations where PoE power and daisy-chained Ethernet reduce cabling

U-7504M CR is a networked I/O module for engineers who need to bring local digital and analogue signals onto OPC UA, MQTT or RESTful API systems without a separate gateway. It combines 4 digital inputs, 4 analogue inputs and 4 analogue outputs in one unit, with the communication and rule processing handled on the module itself.The built-in two-port 10/100 Base-TX switch allows modules to be daisy-chained, reducing cable runs and the number of switch ports needed. The module can be powered from an IEEE 802.3af (Class 3) PoE network or from a +12 ~ +48 VDC terminal block, which helps simplify wiring and power distribution in cabinets.Configuration, control and I/O monitoring are carried out through the built-in web user interface in a browser. Scaling converts raw analogue readings into more meaningful values, while IF, THEN, ELSE rules and scheduled actions allow logic to run on the module for I/O and virtual points.ApplicationsSending I/O values to cloud systems for display, analysis or control strategyFeeding field control systems with local digital and analogue I/O dataDistributed I/O in cabinets where PoE reduces wiring and power sockets