PPDSM-742-MTCP Programmable Device Server, 3x RS-232 + 1x RS-485, PoE

The PDS-742 is a programmable device server that brings serial equipment onto an Ethernet network. It provides three RS-232 ports and one RS-485 port, so existing serial instruments, controllers and field devices can be integrated without replacing them. The VxComm driver and utility can map the device's serial ports to virtual COM ports on a Windows PC, allowing standard COM-based software to communicate with them over the network.Beyond simple serial-to-Ethernet bridging, the unit runs the built-in MiniOS7 from ICP DAS and can be programmed for custom Ethernet applications. It also operates as a Modbus TCP to RTU/ASCII gateway, supporting SCADA and HMI systems that communicate over Modbus TCP. A watchdog timer and +/-4 kV ESD protection on the serial ports help it cope with demanding industrial environments.The PDS-742 ordering code includes the CA-0910 cable. It has a plastic casing, a removable terminal block for wiring, and can be mounted on a DIN rail or on a wall. It is rated for an operating temperature of -25 ~ +75 °C and is supplied from a +10 ~ 30 VDC terminal block supply.ApplicationsFactory automationBuilding automationHome automation

PDSM-742 CR is a programmable serial-to-Ethernet device server for bringing legacy RS-232 and RS-485 equipment onto an Ethernet network. Its built-in COM ports can be presented as standard virtual COM ports on a Windows PC using the VxComm utility, so existing COM-based software can continue to operate without changes.The unit runs the built-in MiniOS7 operating system and can act as a Modbus TCP to RTU/ASCII gateway, allowing Modbus TCP SCADA and HMI systems to communicate with serial Modbus devices. The Xserver programming structure supports custom Ethernet applications, and the watchdog timer helps the unit recover in demanding environments.The metal housing offers stronger protection than the plastic PDS-700 variants. The serial port includes a +/-4 kV ESD protection circuit, and the RS-485 port uses a self-tuner ASIC controller. A removable terminal block simplifies wiring, and the unit is supplied with the CA-0910 cable.ApplicationsFactory automationBuilding automationHome automation

The PDS-742D is a programmable serial-to-Ethernet device server for bringing legacy RS-232 and RS-485 equipment onto an Ethernet network. Its built-in ports can be presented to a Windows PC as standard virtual COM ports, so existing serial software can continue to work with networked devices.Beyond simple serial tunnelling, the unit runs the MiniOS7 operating system and can be programmed using the Xserver structure to build custom Ethernet applications. It also acts as a Modbus TCP to RTU/ASCII gateway, allowing Modbus TCP SCADA or HMI systems to poll Modbus RTU or ASCII slave devices. The LED display shows power status and a five-digit seven-segment readout.Designed for industrial environments, the device offers a watchdog timer and ESD protection on its serial ports, with removable terminal blocks for wiring. It mounts on DIN-rail or wall and is rated for operation from -25 to +75 °C. A CA-0910 cable is included with this ordering code.ApplicationsFactory AutomationBuilding AutomationHome Automation

The PDSM-742D is a programmable device server that connects serial equipment to an Ethernet network. It provides three RS-232 ports and one RS-485 port, so existing serial instruments, controllers and field devices can be integrated without replacing them.Using the VxComm driver and utility, the built-in serial ports can be presented to a Windows PC as standard virtual COM ports, which keeps legacy software working unchanged. The built-in MiniOS7 operating system allows custom Ethernet applications to be developed with the programmable Xserver structure, and the unit can act as a Modbus TCP to RTU/ASCII gateway for SCADA and HMI systems.The metal housing, watchdog timer and ESD protection on the serial ports suit demanding installations. The removable terminal block simplifies wiring, and the unit is wall mounted and powered from 10 ~ 30 VDC. A CA-0910 cable is included with this ordering code.ApplicationsFactory automationBuilding automationHome automation

The PPDS-742-MTCP brings legacy serial equipment onto an Ethernet network. It provides three RS-232 ports and one RS-485 port, and can be powered over Ethernet using IEEE 802.3af Class 1 PoE from a standard category 5 cable. Its VxComm driver can map the device's serial ports to virtual COM ports on a Windows PC, so existing COM-based software can keep working.Beyond simple serial tunnelling, the unit runs a programmable device server environment with the built-in MiniOS7 firmware, and it can act as a Modbus TCP to RTU/ASCII gateway for SCADA and HMI systems that speak Modbus TCP. Serial ports carry +/-4 kV ESD protection, and the RS-485 port uses a self-tuner ASIC controller.This ordering code is supplied with a CA-0910 cable. The unit has a plastic casing, a removable terminal block for wiring, and can be installed on a DIN rail or wall. Its operating range is -25 ~ +75 °C.ApplicationsFactory automationBuilding automationHome automation

PPDS-742D-MTCP links three RS-232 devices and one RS-485 device to an Ethernet network, so existing serial equipment can be reached from PCs, SCADA and HMI systems without replacing it. The built-in virtual COM support lets software written for local COM ports keep working over the network, and the unit also acts as a Modbus TCP to RTU/ASCII gateway for Modbus TCP clients.The unit is built around a programmable Xserver structure and the MiniOS7 runtime, so custom Ethernet logic can be added to the serial interfaces. Each serial port has ESD protection rated at +/-4 kV, and the RS-485 port uses a self-tuner ASIC controller. A watchdog timer supports operation in harsh environments.Power can be supplied over Ethernet via IEEE 802.3af, Class 1 PoE, or from a +12 ~ 48 VDC terminal block. The removable terminal block and DIN-rail or wall mounting suit panel installation, and a single-LED power/PoE indicator plus a five-digit 7-segment display show status on the unit. This ordering code includes the CA-0910 cable.ApplicationsFactory automationBuilding automationHome automation

The PPDSM-742D-MTCP links serial devices to an Ethernet network. It provides three RS-232 ports and one RS-485 port, and its built-in Modbus TCP to RTU/ASCII gateway lets SCADA and HMI systems that speak Modbus TCP reach serial slave devices. Virtual COM drivers can also present the device's serial ports as standard COM ports on Windows PCs.Programmable through the Xserver structure, the unit runs the MiniOS7 operating system, which is designed to start quickly and respond promptly. Power can come from a PoE switch under IEEE 802.3af (Class 1) or from a +12 ~ 48 VDC terminal block. The removable terminal block is intended for straightforward wiring in industrial installations.The metal housing is suited to wall mounting and offers stronger protection than the plastic PDS-700 variants. The package includes a CA-0910 cable. The unit carries an LED display showing power/PoE status and a 5-digit 7-segment readout, and is rated for an operating temperature of -25 ~ +75 °C.ApplicationsFactory AutomationBuilding AutomationHome Automation