PET-7267 PoE Ethernet I/O Module, 8-ch Form A Power Relay Output

ET-7067 CR is a DIN-rail Ethernet I/O module that gives engineers eight form A (SPST N.O.) power relay outputs, each rated 5 A at 250 VAC or 24 VDC for resistive loads. It is aimed at switching jobs in building, factory and machine automation where the controller talks to the module over Modbus TCP or Modbus UDP.Each relay has its own programmable power-on value and safe value, so the outputs can be set to a defined state at start-up and during communication faults. The I/O side is optically isolated to 3000 VDC for transient overvoltage protection, and the module can be used where hazardous voltages are present. Note that there is no channel-to-channel isolation between the relays.The module is powered from a +10 ~ +30 VDC terminal block with reverse polarity protection, and it has a built-in web server with web HMI, ID, password and IP filter access control, and dual watchdogs for the module and communication. It is intended for operation from -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7267 CR switches loads through eight form A (SPST N.O.) power relays, with each channel rated at 5 A @ 250 VAC/24 VDC for resistive loads. Relay operate and release times are 10 ms and 5 ms maximum, and the module is configured over Ethernet with Modbus TCP or Modbus UDP.A built-in 2-port Ethernet switch with LAN bypass allows the module to be daisy-chained along a network, which simplifies cabling in distributed installations. The built-in web server and Web HMI provide browser-based access, and access control uses ID, password and IP filtering.The power-on value and safe value of each relay are programmable, and I/O is optically isolated to 3000 VDC. Because there is no channel-to-channel isolation, the module suits applications where hazardous voltages are present, provided the wiring is planned accordingly. Dual watchdogs cover both the module and communication.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The PET-7067 CR is a PoE-powered Ethernet I/O module that switches loads through eight Form A (SPST N.O.) power relays. Each relay is rated 5 A at 250 VAC or 24 VDC on resistive loads, which makes the module suitable for driving higher-current equipment directly from a network-controlled output.Communication runs over a 10/100 Base-TX RJ-45 port using Modbus TCP or Modbus UDP. A built-in web server and web HMI allow configuration and monitoring from a browser, while access control via ID, password and IP filter helps restrict who can change settings. The dual watchdog (module and communication, both programmable) supports recovery from faults.The relay power-on and safe values are programmable, so outputs can be set to a defined state at start-up or when communication is lost. The I/O is isolated at 3000 VDC, but the relay channels are not isolated from each other. The module is intended for building, factory and machine automation, remote maintenance and diagnosis, and test equipment.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7260 CR is a PoE-powered Ethernet I/O module that combines six wet contact digital inputs with six Form A power relays. Each input can be used as a 32-bit counter, making the unit suitable for pulse counting and status monitoring over Modbus TCP or Modbus UDP.The integrated 2-port 10/100 Base-TX switch with LAN bypass allows the module to be daisy-chained along a network line. Relay power-on and safe values are programmable, and the I/O is optically isolated to 3000 VDC for transient overvoltage protection, although the input channels are not isolated from each other.Each relay is rated 5 A @ 250 VAC/24 VDC for resistive loads. When switching inductive loads, fit a flyback diode for DC loads or a metal oxide varistor for AC loads to protect the relay contacts and extend relay life.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment