PET-7244 PoE Ethernet I/O Module, 8-ch DI/Counter and 8-ch DO

ET-7044 CR is a DIN-rail Ethernet I/O module that pairs eight wet-contact digital inputs with eight sink-type digital outputs. Each input can be used as a 32-bit counter, which suits pulse counting and event tracking on machines, building services and test equipment. Each output channel can switch a 300 mA load at 25 °C, so it can drive a power relay module directly.The module communicates over Modbus TCP and Modbus UDP through a 10/100 Base-TX RJ-45 port. A built-in web server with Web HMI allows configuration and monitoring from a browser, and access is controlled by ID, password and IP filter. Dual programmable watchdogs cover the module and the communication link, and the digital outputs have programmable power-on and safe values for defined behaviour during start-up or fault conditions.Electrical isolation is rated at 1500 VDC for the Ethernet side and 2500 VDC for the I/O side. The digital inputs and outputs are not isolated from each other channel to channel. The module is powered from a +10 ~ +30 VDC terminal block with reverse polarity protection, and it operates from -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7244 CR is a DIN-rail Ethernet I/O module that combines eight wet contact digital inputs with eight sink-type digital outputs. Each input can also operate as a 32-bit counter, which suits pulse counting and event logging on remote machines and panels.Communication runs over Modbus TCP and Modbus UDP. A built-in web server and web HMI allow configuration and monitoring from a browser, and access is controlled by ID, password and IP filter. The integrated 2-port 10/100 Base-TX switch with LAN bypass supports daisy-chain topologies, and the module adds dual watchdog protection and I/O pair connection.Isolated I/O at 2500 VDC and Ethernet at 1500 VDCProgrammable power-on and safe values for digital outputsReverse polarity protection on the terminal block power inputApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7044 CR is a PoE-powered Ethernet I/O module for engineers who need eight digital inputs and eight digital outputs on a single DIN-rail unit. The inputs are wet contact type, accept +10 ~ +50 VDC as ON level and can each be used as a 32-bit counter, with a maximum count of 4,294,967,295 and a frequency of 500 Hz. The outputs are sink type, rated at 300 mA per channel at 25°C, and both their power-on value and safe value are programmable.The module communicates over Modbus TCP and Modbus UDP through a single RJ-45 10/100 Base-TX port, and can be powered from PoE (IEEE 802.3af) or from a +12 ~ +48 VDC terminal block. A built-in web server and web HMI allow configuration and monitoring without dedicated software, and access is controlled by ID, password and IP filter. Dual watchdogs cover both the module and communication.Isolation is provided as 2-way I/O isolation rated at 2500 VDC, while the channels are not isolated from each other. The unit is suited to building automation, factory and machine automation, and remote maintenance and diagnosis. The ordering code PET-7044 CR is listed as RoHS.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7242 CR is a PoE-powered Ethernet I/O module that switches 16 sink-type digital outputs and reports them over Modbus TCP or Modbus UDP. Each channel is an isolated open-collector output rated at 650 mA per channel at 25°C, and the outputs can drive an RM series relay module directly, which suits switching inductive loads.Output behaviour is configurable, with a programmable power-on value and safe value for each channel. The module provides overvoltage, overload and short-circuit protection. A 2-port 10/100 Base-TX switch with LAN bypass supports daisy-chain topologies, and a dual watchdog supervises both the module and the communication link.The unit includes a built-in web server with web HMI and access control based on ID, password and IP filter. It can be powered from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and is rated for -25 ~ +75 °C operation. Certification marks listed for this model are CE, UKCA, FCC, RoHS and WEEE.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment