PET-7226 PoE Ethernet I/O Module, 6-ch AI, 2-ch AO, 2-ch DI, 2-ch DO

The ET-7026 CR is a multi-function Ethernet I/O module that brings analog and digital signals onto a single network node. Its six differential analogue inputs and two analogue outputs cover a wide range of process signals, while two digital inputs (with counter capability) and two open-collector digital outputs handle discrete control tasks, all from one DIN-rail unit.Each analogue input can be configured for its own range, covering voltage and current options from ±500 mV up to ±10 V and 4 ~ 20 mA, with 240 Vrms overvoltage protection. Input and output types are selected by jumper position, so the same module suits a range of field devices. Each channel can be set up individually.The module suits engineers who need Modbus TCP or Modbus UDP access without a separate controller at the I/O point. A built-in web server and web HMI support setup and monitoring, while the dual watchdog, programmable power-on and safe values, and I/O pair connection help maintain predictable behaviour during faults.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The ET-7226 CR is an Ethernet I/O module that brings mixed analogue and digital signals onto a Modbus network from a single DIN-rail unit. It suits engineers who need six differential analogue inputs and two analogue outputs alongside two digital inputs (with counter function) and two digital outputs, without adding separate remote I/O modules.Each analogue input can be configured individually for voltage or current ranges, including +/-500 mV, +/-1 V, +/-5 V, +/-10 V, 0 ~ 20 mA, +/-20 mA and 4 ~ 20 mA, with the input type set by jumper. Open wire detection is available for 4 ~ 20 mA inputs. The analogue outputs support voltage and current ranges, and the power-on and safe values of the outputs are programmable.The built-in two-port 10/100 Base-TX switch with LAN bypass supports daisy-chain wiring, and the module offers Modbus TCP and Modbus UDP, a built-in web server and Web HMI, and access control by ID, password and IP filter. Isolation is rated at 1500 VDC on the Ethernet side and 2500 VDC on the I/O side.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

PET-7026 CR combines six analog inputs, two analog outputs, two digital inputs and two digital outputs in one DIN-rail Ethernet module. It suits engineers who need mixed signal acquisition and control at a single network node, with Modbus TCP and Modbus UDP available for host communication.Each analog input can be set to voltage or current and to a range from ±500 mV to ±20 mA or 4 ~ 20 mA, selected by jumper. The inputs are rated for 240 Vrms overvoltage protection, and the analog outputs can likewise be configured for voltage or current using their jumpers. The digital inputs support dry or wet contact and can count pulses up to 32-bit.Suitable for deployments where power and data share one Ethernet cable, using PoE (IEEE 802.3af, Class 1) or a +12 ~ +48 VDC terminal block supply.Built-in web server and Web HMI simplify configuration and monitoring.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The PET-7224 CR is a PoE-powered Ethernet I/O module that combines four analogue outputs, five digital inputs and five digital outputs in one DIN-rail unit. Each analogue output can be set to voltage or current through its jumper, covering +/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA ranges, so one module can suit a wide mix of actuators and valves.Communication is handled over Modbus TCP and Modbus UDP, with a built-in web server and web HMI for configuration and monitoring. A 2-port switch with LAN bypass allows units to be daisy-chained along a network, reducing the cabling needed for distributed I/O.Electrical protection includes 2500 VDC intra-module isolation and 4 kV ESD protection. Dual watchdogs, programmable power-on and safe values for outputs, and the device's I/O pair connection support dependable operation in automation and remote diagnosis tasks.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment