NSM-205AFCS-60T Unmanaged Fiber Ethernet Switch, 4-Port + 1 x 100Base-FX SC

NS-205AFT-T is an unmanaged Ethernet switch that combines four 10/100Base-TX RJ-45 ports with a single 100Base-FX multi-mode fibre port fitted with an ST connector. The fibre uplink carries 100 Mbps over distances of up to 2 km, and because the link is optical, electrical noise on the plant floor does not couple into the signal path.The unit accepts a wide +12 to +48 VDC supply through redundant power inputs, so it can run from the common DC voltages used in industrial automation without an external converter. Reverse polarity protection and a relay alarm output with a 2 A @ 30 VDC rating support straightforward power and fault monitoring. Broadcast storm protection is included.Mounting is on a DIN rail. The housing is plastic and the specified operating range is -30 °C to +75 °C, with storage between -40 °C and +85 °C. For the fibre link, the datasheet recommends 62.5/125 µm cable for full-duplex operation.ApplicationsIndustrial automation Ethernet networksFibre-based links between industrial network segments

NS-205AFC-T CR is an unmanaged Ethernet switch that combines four 10/100Base-TX RJ-45 ports with one 100Base-FX multi-mode fibre port terminated in an SC connector. The fibre link keeps electrical noise away from the signal path and extends reach to 2 km in full duplex, which suits connections between cabinets or buildings where copper would be unreliable.The switch accepts redundant +12 to +48 VDC supplies, so it can run from common industrial DC rails without an external converter. Reverse polarity protection and a relay alarm output rated 2 A @ 30 VDC help with fault monitoring on site.Store-and-forward processing, IEEE 802.3x flow control and broadcast storm protection support stable operation on small industrial Ethernet segments. Mounting is on DIN-rail, and the operating range is -30 °C to +75 °C.ApplicationsIndustrial Ethernet segments requiring a fibre link for noise immunityFibre uplinks between cabinets or buildings for Ethernet-connected equipmentInstallations with a 12 to 48 VDC power supply and no external converter

The NS-205AFCS-T CR is an unmanaged Ethernet switch that connects four RJ-45 copper ports (10/100Base-TX) to one single-mode fibre port (100Base-FX, SC connector). Fibre keeps electrical noise out of the link and supports distances up to 30 km, with 9/125 μm fibre recommended for full duplex operation.Power is supplied through redundant dual +12 to +48 VDC inputs with reverse polarity protection, so the switch can run from common industrial supply voltages without an external converter. A relay alarm output (2 A @ 30 VDC) and status LEDs help with monitoring.The plastic casing mounts on a DIN rail and is rated for an operating range of -30 °C to +75 °C. This ordering code is the single-mode 30 km SC variant of the NS-205 series.ApplicationsIndustrial automation networksLong-distance Ethernet links over single-mode fibreElectrically noisy environments

The NS-205AFCS-60T is an unmanaged Ethernet switch that combines four RJ-45 copper ports with one 100Base-FX single-mode fibre port. It suits engineers who need to extend a 10/100 Mbps segment over long distances while keeping electrical noise out of the link.The fibre port uses an SC connector and supports up to 60 km, with 9/125 μm fibre recommended for full duplex operation. Redundant dual +12 to +48 VDC inputs with reverse polarity protection allow the switch to run from common industrial supply voltages without an external converter, and a relay alarm output reports power faults.Store and forward processing with a 2048-entry MAC table and 1 Mbit frame buffer memoryMounts on DIN-rail in a plastic housing measuring 31 x 157 x 123 mm (W x L x H)Operating range of -30 °C to +75 °C, suitable for demanding cabinet environmentsApplicationsLong-distance 10/100 Mbps Ethernet links between buildings or remote machine sitesElectrically noisy industrial environments where fibre isolates the linkIndustrial automation panels operating from 12 to 48 VDC supplies

NSM-205AFT-T is an unmanaged Ethernet switch with four 10/100Base-TX RJ-45 ports and one 100Base-FX multi-mode fibre port with an ST connector. It suits designs that need to carry Ethernet traffic over fibre, which keeps the link insulated from electrical noise and supports transmission distances of up to 2 km for full duplex operation.The unit accepts a wide +12 to +48 VDC input range with redundant power inputs and reverse polarity protection, so it can be fed from common industrial supply voltages without an external converter. A relay alarm output and status LEDs for power, power fault, link activity and 10/100M speed help with monitoring in the field.The metal casing is rated IP30 and mounts on a DIN rail. It is specified for an operating temperature of -30 °C to +75 °C and carries CE, UKCA, FCC, RoHS and WEEE declarations, making it a practical choice for compact industrial cabinets.ApplicationsIndustrial automation Ethernet networksFibre links over distances up to 2 kmElectrically noisy installations where fibre isolation is requiredCompact DIN-rail control cabinets with DC supplies

The NSM-205AFC-T is an unmanaged switch that combines four RJ-45 10/100Base-TX ports with one 100Base-FX multi-mode fibre port using an SC connector. The fibre uplink carries 100 Mbps over distances of up to 2 km in full duplex, and it is far less exposed to electrical noise than copper cabling, which suits noisy plant environments.Power is supplied through redundant +12 ~ +48 VDC inputs with reverse polarity protection, so the unit can run from a range of common industrial DC supplies. A relay alarm output and PWR_Fault indication help flag power problems, and broadcast storm protection helps keep the network stable under heavy broadcast traffic.The metal housing is designed for DIN-rail mounting in control cabinets and is rated IP30, with an operating range of -30 °C ~ +75 °C and a storage range of -40 °C ~ +85 °C. Supported standards include IEEE 802.3, 802.3u and 802.3x, with 1500 Vrms isolation between ports for one minute.ApplicationsExtending Ethernet segments over multi-mode fibre up to 2 kmConnecting devices in electrically noisy industrial areas where copper runs are a concernControl cabinet networks powered from redundant DC supplies

The NSM-205AFCS-T CR is an unmanaged Ethernet switch that combines four 10/100Base-TX RJ-45 ports with one 100Base-FX single-mode fibre port. Fibre optic links are immune to electrical noise and can span up to 30 km at 100 Mbps, which makes the switch a practical choice for extending industrial Ethernet segments across large sites.Power is supplied through two redundant inputs accepting +12 to +48 VDC, with reverse polarity protection. This wide range covers common industrial supply voltages without an external converter, and a relay alarm output reports power faults to the control system. The metal housing with DIN-rail mounting and IP30 rating suits control cabinet installation.Store-and-forward processing, IEEE 802.3x flow control and broadcast storm protection help keep traffic under control on the network. The unit is rated for operation from -30 °C to +75 °C and carries CE, UKCA, FCC, RoHS and WEEE marking.ApplicationsLong-distance Ethernet links in industrial automation networksConnecting remote machines or control cabinets over single-mode fibreNoise-prone industrial environments where fibre isolation is preferred