ISO-DA8/S ISA Isolated 8-ch 14-bit Analog Output Board
ISA bus analog output card with 8 double-buffered 14-bit channels, 2500 VDC photo-isolation and software-selectable voltage or current outputs for PC/AT systems.
- 8 channels of 14-bit double-buffered analog output on an ISA bus card
- Built-in DC/DC converter with 3000 VDC isolation and 2500 VDC photo-isolation protection
- Unipolar or bipolar output and 0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 V ranges selectable in software
- Voltage outputs and 4 ~ 20 mA current sink to ground from each converter
- Jumperless, trimless design with software calibration and data stored in EEPROM
- Power-on AO value can be pre-defined and stored in on-board EEPROM
€627.00 per piece
| 1–9 pcs | €627.00 | |
|---|---|---|
| 10–30 pcs | €608.00 | −3 % |
| 31+ pcs | €596.00 | −5 % |
Product information "ISO-DA8/S ISA Isolated 8-ch 14-bit Analog Output Board"
The ISO-DA8/S CR is an isolated analog output card for PC/AT compatible computers, providing eight 14-bit channels that can drive voltage or current loads. Each channel has its own converter with built-in DC/DC isolation, which suits engineers who need to keep control outputs electrically separated from the host PC.
Output type and range are set in software, so unipolar or bipolar operation and the 0 ~ 5 V, ±5 V, 0 ~ 10 V or ±10 V ranges can be changed without hardware adjustment. The board is jumperless and trimless, and calibration is performed in software with the data held in EEPROM. The power-on output value can also be defined and stored on board, which helps when outputs must start from a known state.
The card also provides 16 digital inputs, 16 digital outputs and three 16-bit timer/counter channels, all at 5 V/TTL levels. This ordering code is supplied with a DN-37 Terminal Board and a CA-3710 D-Sub cable, rather than the CA-4002 D-Sub connector listed for the ISO-DA8 CR.
Applications
- Programmable voltage source
- Programmable current sink
- Harsh environment operation
- Process control
| Product type: | Analog output board |
|---|---|
| Interface: | ISA bus |
| Digital inputs: | 16 |
| Digital outputs: | 16 |
| Isolation: | 2500 VDC photo-isolation |
| Power input: | +5 V |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| Hardware | |
|---|---|
| Connector | Female DB37 x 1 20-pin Box header x 2 |
| Analog Output | |
| Channels | 8 |
| Range | Voltage: ±10 V Current: 0 ~ 20 mA |
| Resolution | 14-bit |
| Accuracy | 0.04% of FSR ±2 LSB @ 25 °C, ± 10 V |
| Response Time | 250 kHz (Typical) |
| Voltage Output Capability | ±5 mA |
| Slew Rate | 0.6 V/μs |
| Operation Mode | Static Update |
| Digital Input | |
| Channels | 16 |
| Type | 5 V/TTL |
| ON Voltage Level | 2.0 V Min. |
| OFF Voltage Level | 0.8 V Max. |
| Response Speed | 1.0 MHz (Typical) |
| Trigger Mode | Static Update |
| Digital Output | |
| Channels | 16 |
| Type | 5 V/TTL |
| Operation Mode | Static Update |
| Load Voltage | Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. |
| Load Current | Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V |
| Response Speed | 1.0 MHz (Typical) |
| Timer/Counter/Frequency | |
| Channels | 3 |
| Type | 5 V/TTL |
| Resolution | 16-bit |
| Reference Clock | Internal: 4 MHz |
| PC Bus | |
| Type | ISA |
| Data Bus | 8-bit |
| Power | |
| Consumption | 800 mA @ +5 V |
| Mechanical | |
| Dimensions (mm) | 122 x 182 x 22 (W x L x D) |
| Environment | |
| Operating Temperature | 0 ~ +60°C |
| Storage Temperature | -20 ~ +70°C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login