I-7532RM-FD 2-Port CAN/CAN FD Bridge with Rotary Baud Rate Switch
Two-port CAN/CAN FD bridge with rotary-switch baud rate selection. It links CAN and CAN FD networks and converts messages between them, with no PC needed for basic setup.
- Bridges CAN and CAN FD networks in any combination, with an independent baud rate on each port
- Rotary switch selects common CAN/CAN FD baud rates, or user-defined rates can be set with the Utility tool
- CAN FD ISO and Non-ISO (Bosch) standards are switchable
- CAN bit rates from 10 kbps to 1000 kbps, CAN FD data field rates from 100 kbps to 10000 kbps
- Message filtering plus forwarding, mapping, merging and splitting rules
- Up to 10,000 fps per port with a 128-frame receive buffer
€391.00 per piece
| 1-9 pcs | €391.00 | |
|---|---|---|
| 10-30 pcs | €371.00 | −5 % |
| 31+ pcs | €352.00 | −10 % |
Product information "I-7532RM-FD 2-Port CAN/CAN FD Bridge with Rotary Baud Rate Switch"
The I-7532RM-FD links two CAN or CAN FD networks through an isolated bridge, so you can extend a bus, increase its loading capacity or join segments running at different baud rates. It converts messages in every direction: CAN to CAN, CAN to CAN FD, CAN FD to CAN and CAN FD to CAN FD.
Frame mapping, merging and splitting rules let specific messages be reshaped as they pass between networks. Merging combines several CAN messages into one CAN FD message, and splitting does the reverse. Filter and forwarding rules are configured over USB with the Utility tool, and each port handles up to 10,000 fps.
Unlike the I-7532M-FD, which needs a PC to set baud rates, the I-7532RM-FD has a rotary switch for selecting common CAN and CAN FD baud rates on site. This suits installation and maintenance work where a computer is not connected.
Applications
- Bridging two CAN or CAN FD networks
- Increasing CAN bus loading capacity
- Extending CAN communication distance
- Connecting CAN/CAN FD networks that run at different baud rates
- Converting messages between CAN and CAN FD networks
- On-site installation and maintenance by system integrators and field service engineers
| Product type: | CAN bridge |
|---|---|
| Interface: | CAN / CAN FD |
| Protocol: | CAN 2.0 A/B, CAN FD |
| Ports: | 2 |
| Isolation: | 3000 VDC (DC-to-DC), 2500 Vrms (photo-coupler) |
| Power input: | +10 VDC ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | Wall, DIN-rail |
| Housing: | Metal |
Specifications
| LED Indicators | |
|---|---|
| Status | 1 x Power 1 x USB status 2 x CAN status |
| USB | |
| Specification | USB 2.0 High Speed (480Mbps) |
| Connector | 1 x USB (Type C) |
| Driver | Built-in Windows 7/8.1/10/11 |
| CAN | |
| Ports | 2 |
| Specification | ISO 11898-2, CAN 2.0 A/B and FD |
| Baud Rate | CAN bit rates: 10 k ~ 1 M bps, CAN FD bit rates for data field: 100 k ~ 10 M bps (*Note1) Bit rate setting via rotary switch and utility tool |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-coupler |
| Terminal Resistor | Switch for 120Ω terminal resistor |
| Filter | Yes |
| Receive Buffer | 128 frames |
| Time Delay | [ 1Mbps (8-byte Data) ] ID-29bit => 160 us, ID-11bit => 142 us ; [ 10Kbps (8-byte Data) ] ID-29bit => 13.8 ms, ID-11bit => 12 ms |
| Data Flow | 10,000 FPS (each port) |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 1.2 W |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 102 x 120 x 37.5 (W x L x H) |
| Installation | Wall Mount or DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Login
Accessories
CNT-CAN CR is a CAN bus connector for linking a CAN bus node to the bus line quickly. Its quick-connect technology removes the need to strip the bus conductors, which simplifies installation.The connector has a plastic housing with an integrated terminating resistor that can be selected with a built-in switch. It provides two cable entries and a 9-pin D-Sub female connector with a 90° cable outlet, and is available with a programming interface.It suits engineers who need to add a CAN device to an existing CAN bus line with minimal wiring work and a clear choice of bus termination.ApplicationsConnecting a CAN bus node to a CAN bus lineAdding CAN devices to an existing CAN bus network
Similar products
The I-7532M-FD is a local CAN/CAN FD bridge that connects two CAN or CAN FD networks. Use it to add bus loading capacity, extend communication distance or join segments running at different baud rates. It transforms messages in all four directions: CAN to CAN, CAN to CAN FD, CAN FD to CAN and CAN FD to CAN FD.Beyond simple forwarding, the bridge supports frame forwarding, mapping, merging and splitting rules. Merging combines several CAN messages into one CAN FD message, and splitting breaks one CAN FD message into several CAN messages. Message filters can be configured, and each port's baud rate can be set independently. Configuration is carried out over USB using the I-7532-FD Utility tool.The module is built in a metal casing, is rated for -25 ~ +75 °C operation and mounts on a wall or DIN rail. Ordering code I-7532M-FD CR covers the 2-port CAN/CAN FD bridge with RoHS compliance.ApplicationsConnecting CAN and CAN FD networks with different baud ratesExtending CAN bus distance and increasing bus loading capacityIntegrating diverse communication devices for industrial control and monitoring
I-7532-G CR is a two-channel CAN bridge that links two CAN networks, including networks running at different baud rates. Each port is galvanically isolated, so a bit error or other fault on one port does not disturb the other, which helps keep both segments stable.Both ports are fully compliant with ISO 11898-2 and support CAN 2.0A and CAN 2.0B frames. Baud rate is set by rotary switch between 5 kbps and 1 Mbps, or a user-defined rate can be programmed. Each channel handles up to 100 nodes and buffers 768 data frames, and message acceptance filters can be configured. Messages can also be forwarded under a different identifier.Suited to CANopen, DeviceNet, J1939 and other CAN-based protocolsFirmware update supported via CAN1ApplicationsExtending the distance of a CAN bus networkConnecting two CAN networks with different baud ratesIncreasing the number of nodes in a CAN bus networkIntegrating multiple identical CAN devices within one CAN networkUse with CANopen, DeviceNet, J1939 and other CAN protocols
The I-7530-FT-G CR bridges RS-232 and CAN networks, letting a PC, HMI or serial controller exchange messages with CAN devices without a dedicated CAN interface card. It supports CAN 2.0A and CAN 2.0B and conforms to ISO 11898-3 low speed fault tolerance, with CAN and RS-232 parameters set in software.Designed for industrial installations, the converter includes a hardware watchdog that resets the unit to keep it running in harsh or electrically noisy environments. Power, data flow and error LEDs for both the CAN and RS-232 sides help with commissioning and fault finding. Transparent communication mode is supported, and the CAN and RS-232 receive buffers hold 1000 and 900 frames respectively.Note that full-duplex communication with RS-232 devices is not supported. The unit operates from +10 VDC to +30 VDC, runs between -25 and +75 °C, and mounts on a DIN-rail in a plastic housing.ApplicationsConnecting PCs or HMIs to CAN bus devicesIntegrating RS-232 embedded controllers into CAN networksMonitoring and control of CAN devices from serial-equipped hostsIndustrial control and monitoring systems
I-7530-G is an RS-232 to CAN converter that lets a PC or any device with a serial port exchange messages with CAN devices. It handles conversion between the two networks, so serial hosts can monitor and control CAN nodes without a dedicated CAN interface.The CAN port is compatible with CAN 2.0A and 2.0B and conforms to ISO 11898-2, with a jumper-selectable 120 Ω terminal resistor. CAN and RS-232 communication parameters are set in software, and transparent communication mode is supported. The CAN side provides 3000 VDC isolation, helping to protect the RS-232 equipment from faults on the CAN network.A built-in watchdog monitors operation, and power, data flow and error indicators show the status of both interfaces. The module has a 1000-frame receive buffer on the CAN side and a 900-frame buffer on the RS-232 side. Full-duplex operation of RS-232 devices is not supported. Installation is on a DIN-rail in a plastic housing, with an operating range of -25 ~ +75 °C.ApplicationsConnecting PCs or HMI hosts to CAN device networks over RS-232Linking RS-232 programmable controllers and embedded controllers to a CAN networkMonitoring and control of CAN devices in industrial automation systems