I-7017RC 8-ch Current Input Module with High Voltage Protection (DCON)

The I-7017Z-G is a DIN-rail analog input module for engineers who need to measure voltage or current signals on a noisy or high-voltage input side. It offers 10 differential or 20 single-ended channels, with the channel mode selected in software. Each channel can be given its own input range, so mixed signal types can share one module.Input protection is a key strength. The module tolerates 240 Vrms overvoltage and ±200 VDC common voltage, and limits overcurrent to 50 mA at 110 VDC. Voltage and current input is selected by jumper, and per-channel open wire detection is provided for 4 ~ 20 mA loops. The 16-bit converter can run in Normal mode at 10 Hz for higher accuracy (±0.1% of FSR) or in Fast mode at 60 Hz (±0.5% of FSR).Communication is over a single RS-485 port using the DCON protocol at 1200 ~ 115200 bps (N, 8, 1). Isolation is rated at 3000 VDC intra-module, and the built-in dual watchdog covers both the module and communication. The unit is powered from +10 ~ +30 VDC and is specified for operation from -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The I-7017R CR is an 8-channel analogue input module for RS-485 networks using the DCON protocol. It accepts both voltage and current signals and is built to tolerate faults that would damage standard inputs, with overvoltage protection up to 240 Vrms and a common voltage protection of ±200 VDC.Each channel is 16-bit with differential inputs. Engineers can choose between normal mode at 10 Hz, with ±0.1% of FSR accuracy, and fast mode at 60 Hz, with ±0.5% of FSR accuracy, depending on whether measurement precision or update speed matters more. Individual channel configuration and 4 ~ 20 mA open wire detection are available on this model.Suited to building, factory and machine automation, remote maintenance and diagnosis, and test equipment.Supports 3000 VDC intra-module isolation and ±4 kV ESD protection on each terminal.Powered from +10 ~ +30 VDC with reverse polarity protection, and mounted on DIN-rail.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The I-7017R-A5-G CR is a DIN-rail analog input module for engineers who need to measure high-voltage signals over RS-485. It accepts ±50 V or ±150 V inputs across eight differential channels, with 16-bit resolution and an input impedance of 290 kΩ on the voltage ranges.This gray-cover variant is built for signals that would overload standard low-voltage input modules. Overvoltage and common voltage protection are rated at ±200 VDC, and the module offers ±4 kV ESD contact protection on each terminal. Sampling can be switched between Normal Mode at 10 Hz and Fast Mode at 50 Hz, with accuracy of ±0.1% of FSR and ±0.5% of FSR respectively.Communication runs through one RS-485 port using the DCON protocol at 1200 ~ 115200 bps, with data format (N, 8, 1). The module is powered from +10 ~ +30 VDC with reverse polarity protection and is rated for operation from -25 ~ +75 °C.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment

The I-7017 is an RS-485 analog input module for engineers who need to acquire voltage or current signals across eight channels. Channels can be configured as eight differential inputs, or as six differential and two single-ended inputs, using a jumper. All channels share the same selected input range, and 4 ~ 20 mA inputs need an optional external 125 Ω resistor.The module provides 16-bit resolution and a normal sampling mode of 10 Hz. Open wire detection for 4 ~ 20 mA inputs helps identify broken sensor wiring, and a built-in dual watchdog supports reliable operation in unattended systems. Intra-module isolation of 3000 VDC and ±120 VDC overvoltage protection add robustness on the input side.This blue-cover version communicates over a single RS-485 port using the DCON protocol, with baud rates from 1200 to 115200 bps. It suits building, factory and machine automation, as well as remote maintenance, diagnosis and testing equipment.ApplicationsBuilding AutomationFactory AutomationMachine AutomationRemote MaintenanceRemote DiagnosisTesting Equipment