DN-8K32R 32-Channel Form A Relay Output Board with DIN-Rail Mounting
32-channel Form A relay output board with a 37-pin connector for the I-8041 and I-87041, LED status per relay and a +12 ~ 30 VDC power input.
- 32 Form A relays rated 3 A @ 250 VAC, 10 ms operate time and 5 ms release time
- 37-pin connector compatible with the I-8041 and I-87041
- LED indicator for each relay plus a power status LED
- Screw terminals for field wiring
- Power input +12 ~ 30 VDC, 6 W maximum consumption
- Operating temperature -25 ~ 75°C, DIN-rail mounting
€258.00 per piece
| 1-9 pcs | €258.00 | |
|---|---|---|
| 10-30 pcs | €245.00 | −5 % |
| 31+ pcs | €232.00 | −10 % |
Product information "DN-8K32R 32-Channel Form A Relay Output Board with DIN-Rail Mounting"
The DN-8K32R CR adds 32 Form A relay outputs to a 37-pin DAQ interface, letting engineers switch loads programmatically from I-8041 and I-87041 systems. Each relay is rated 3 A @ 250 VAC and has a 10 ms operate time and a 5 ms release time.
Status is easy to check at a glance: an LED lights for each active relay, and a separate LED shows the power state. Field wiring terminates on screw terminals, and the board mounts on a DIN rail for panel installation.
This ordering code includes the CA-3705A DB37 male-to-female cable, 0.5 m, so the board can be connected to the compatible controller straight away. Power is supplied from +12 ~ 30 VDC with a maximum consumption of 6 W, and the board operates between -25 ~ 75°C.
Applications
- On/off control
- Energy management
- Test automation
- Process control
| Product type: | Relay output board |
|---|---|
| Interface: | DB37 37-pin |
| Relay outputs: | 32 |
| Power input: | +12 ~ 30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| Relay Output | |
|---|---|
| Channels | 32 |
| Contact Rating | Form A: 3 A @ 250 VAC |
| Operate Time | Form A: 10 ms |
| Release Time | Form A: 5 ms |
| Mechanical Endurance | SPST:10,000,000 ops. |
| Power | |
| Input Range | +12 ~ 30 VDC |
| Consumption | 6 W Max. |
| Mechanical | |
| Dimensions (mm) | 118 x 174 (W x L) |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | -25 ~ 75°C |
| Storage Temperature | -30 ~ +85℃ |
| Humidity | 10% ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Accessories
DB37 Male to Female Cable, 90º, 50cm.
Similar products
The DN-8K16P16R is a screw-terminal board that gives field wiring access to 16 digital input channels and 16 Form A signal relays. A 37-pin D-sub connector links it directly to the I-8042W or I-87042W, so the board can be fitted without custom wiring between the module and the field devices.Each relay has an LED that shows its individual state, which helps with commissioning and fault finding at the cabinet. The relays are rated at 3 A @ 250 VAC, with an operate time of 10 ms and a release time of 5 ms for Form A contacts.Suitable for DIN-rail mounting in industrial control cabinets.Operating temperature range of -25 ~ 75°C, with a power input of +12 ~ 30 VDC.ApplicationsField wiring interface for I-8042W and I-87042W modulesSwitching and monitoring of digital inputs and relay outputs in industrial control cabinets
DN-09-2 CR is a DIN-rail mounted breakout board that gives two 9-pin male D-sub connectors a pin-to-pin screw terminal interface, so field wiring can be terminated without working directly on the connector pins. The terminal pitch is 5.08 mm.The order includes two CA-0915 DB9 male to DB9 female cables for RS-232 (Pin 1 to Pin 9, 1.5 m), which allows the board to be connected straight away to a compatible DB9 port.The board measures 103 mm x 86 mm and is rated for 0 ~ 60°C operation and -20 ~ 70°C storage at 5% ~ 90% RH, non-condensing. It is CE, UKCA, FCC, RoHS and WEEE listed according to the source data.ApplicationsTerminating DB9 signals on a DIN-rail screw terminal boardConnecting DB9 cabling to field wiring
DN-09-2F CR is a DIN-rail breakout board that brings the signals of two male 9-pin D-sub connectors out to screw terminals, so field wiring can be connected without custom cabling. Each DB9 pin maps directly to its corresponding screw terminal.The ordering code includes two CA-0910F cables, each a 1 m DB9 female to DB9 female cable wired for RS-232 (Pin1-Pin9), allowing the board to be connected straight to a compatible DB9 port. The board measures 103 mm x 86 mm and mounts on a DIN rail with a 5.08 mm terminal pitch.Rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, at 5% ~ 90% RH non-condensing. Certified CE, UKCA, FCC, RoHS and WEEE.ApplicationsBreaking out D-sub I/O to screw terminals on a DIN rail
The DN-100 CR provides a practical wiring interface for field I/O connections. A single 100-pin SCSI II female connector feeds a pin-to-pin screw terminal block, so signals can be landed on screw terminals instead of being wired directly to the connector.Terminals are spaced at 3.81 mm (0.150 inch), and the board is intended for DIN-rail mounting in a 148 mm x 76 mm footprint. It is rated for an operating range of 0 ~ 60°C and a storage range of -20 ~ 70°C, with humidity of 5% ~ 90% RH, non-condensing.Choose the DN-100 CR when you need a compact, cabinet-friendly termination point for a 100-pin SCSI II connection. The board is CE, UKCA, FCC, RoHS and WEEE listed according to the manufacturer's data.ApplicationsField wiring termination for 100-pin SCSI II data acquisition daughter board I/O