DN-50/N 50-pin Header I/O Connector Block, 5.08 mm Pitch, DIN-Rail
Screw-terminal connector block with a 50-pin header and 5.08 mm pitch for wiring I/O signals on DAQ daughter board systems. Supplied with a 1.5 m, 50-pin flat cable (CA-5015).
- One 50-pin header for direct connection
- Pin-to-pin screw terminal for I/O wiring
- 5.08 mm pitch
- Includes CA-5015 flat cable, 50-pin, 1.5 M
- DIN-rail mounting, 148 mm x 76 mm
- Operating temperature 0 ~ 60°C
€66.00 per piece
| 1-9 pcs | €66.00 | |
|---|---|---|
| 10-30 pcs | €63.00 | −5 % |
| 31+ pcs | €60.00 | −9 % |
Product information "DN-50/N 50-pin Header I/O Connector Block, 5.08 mm Pitch, DIN-Rail"
The DN-50/N CR is a 50-pin header I/O connector block that breaks out the signals of a 50-pin header to pin-to-pin screw terminals, giving engineers a practical way to wire field connections without working directly on the header.
The block has a 5.08 mm pitch and mounts on a DIN rail, measuring 148 mm x 76 mm. The order includes a CA-5015 flat cable, 50-pin, 1.5 M, so the block can be connected straight out of the box. It is listed under DAQ daughter board accessories.
Rated for an operating temperature of 0 ~ 60°C and a humidity range of 5% ~ 90% RH, non-condensing, with a storage temperature of -20 ~ 70°C. Carries CE, UKCA, FCC, RoHS and WEEE markings.
Applications
- Breaking out 50-pin header I/O signals to screw terminals
- DIN-rail mounted I/O wiring panels
- DAQ daughter board I/O wiring
| Product type: | Connector block |
|---|---|
| Interface: | 50-pin header |
| Operating temperature: | 0 ~ 60°C |
| Mounting: | DIN-rail |
Specifications
| Mechanical | |
|---|---|
| Dimensions (mm) | 148 mm x 76 mm |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | 0 ~ 60°C |
| Storage Temperature | -20 ~ 70°C |
| Humidity | 5% ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Similar products
The DN-50-381 is a 50-pin header I/O connector block with a 3.81 mm pitch. It breaks out the 50-pin header onto screw terminals, so field wiring can be landed on a DIN-rail mounted block instead of being connected directly to the header.Each header pin is wired pin-to-pin to a screw terminal, which keeps the signal mapping straightforward when commissioning or fault-finding. The block is supplied together with the CA-5015 flat cable, a 50-pin, 1.5 m assembly that links the header to the block.The block is rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, at 5% ~ 90% RH non-condensing humidity. It carries CE, UKCA, FCC and WEEE marking.ApplicationsTerminating field I/O wiring on a 50-pin header in a DAQ daughter board installationPanel-mounted wiring on DIN-rail for data acquisition systems
DN-50 CR is a 50-pin header I/O connector block that gives field wiring a clean, organised termination point. Each pin of the 50-pin header is brought out to a screw terminal, so signals can be wired on the rail and routed to the controller or data acquisition board through a single cable.The DN-50 CR ordering code includes the CA-5015 flat cable, a 50-pin cable of 1.5 m, so the block can be connected straight away. It mounts on a DIN rail and is listed with CE, UKCA, FCC, RoHS and WEEE certification.Rated for an operating temperature of 0 ~ 60°CStorage temperature of -20 ~ 70°CHumidity tolerance of 5% ~ 90% RH, non-condensingApplicationsWiring field I/O signals to a DAQ daughter boardPanel-mounted signal distribution in control cabinets
DN-09-2 CR is a DIN-rail mounted breakout board that gives two 9-pin male D-sub connectors a pin-to-pin screw terminal interface, so field wiring can be terminated without working directly on the connector pins. The terminal pitch is 5.08 mm.The order includes two CA-0915 DB9 male to DB9 female cables for RS-232 (Pin 1 to Pin 9, 1.5 m), which allows the board to be connected straight away to a compatible DB9 port.The board measures 103 mm x 86 mm and is rated for 0 ~ 60°C operation and -20 ~ 70°C storage at 5% ~ 90% RH, non-condensing. It is CE, UKCA, FCC, RoHS and WEEE listed according to the source data.ApplicationsTerminating DB9 signals on a DIN-rail screw terminal boardConnecting DB9 cabling to field wiring
DN-09-2F CR is a DIN-rail breakout board that brings the signals of two male 9-pin D-sub connectors out to screw terminals, so field wiring can be connected without custom cabling. Each DB9 pin maps directly to its corresponding screw terminal.The ordering code includes two CA-0910F cables, each a 1 m DB9 female to DB9 female cable wired for RS-232 (Pin1-Pin9), allowing the board to be connected straight to a compatible DB9 port. The board measures 103 mm x 86 mm and mounts on a DIN rail with a 5.08 mm terminal pitch.Rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, at 5% ~ 90% RH non-condensing. Certified CE, UKCA, FCC, RoHS and WEEE.ApplicationsBreaking out D-sub I/O to screw terminals on a DIN rail