DN-100-CA 100-pin SCSI II Terminal Board with 1.5 m Cable
100-pin SCSI II female terminal board with screw terminals for field wiring, supplied with a 1.5 m SCSI-II cable for DAQ daughter board connections.
- One 100-pin SCSI II female connector
- Pin-to-pin screw terminals for I/O wiring connection
- Screw terminals for field wiring
- Includes CA-SCSI100-15 SCSI-II 100-pin cable, 1.5 m
- DIN-rail mounting, 148 mm x 76 mm
- Operating temperature 0 ~ 60°C
€291.00 per piece
| 1-9 pcs | €291.00 | |
|---|---|---|
| 10-30 pcs | €277.00 | −5 % |
| 31+ pcs | €262.00 | −10 % |
Product information "DN-100-CA 100-pin SCSI II Terminal Board with 1.5 m Cable"
The DN-100-CA CR is a DIN-rail mounted terminal board that gives a 100-pin SCSI II female connector a pin-to-pin screw terminal interface for I/O wiring. It lets field wiring terminate on a clean, accessible block rather than directly on the data acquisition hardware.
This ordering code includes the CA-SCSI100-15 SCSI-II 100-pin cable, 1.5 m long, so the board can be connected straight away. It is listed under the DAQ daughter board accessories range and is a related option to the DN-100 in the same series.
Measuring 148 mm x 76 mm, the board is rated for an operating temperature of 0 ~ 60°C, a storage temperature of -20 ~ 70°C and 5% ~ 90% RH non-condensing humidity. It is RoHS and WEEE certified.
Applications
- Field wiring termination for DAQ daughter board systems
- Organising I/O connections on DIN-rail mounted panels
| Product type: | DAQ daughter board |
|---|---|
| Interface: | SCSI II 100-pin |
| Operating temperature: | 0 ~ 60 °C |
| Mounting: | DIN-rail |
Specifications
| Mechanical | |
|---|---|
| Dimensions (mm) | 148 mm x 76 mm |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | 0 ~ 60°C |
| Storage Temperature | -20 ~ 70°C |
| Humidity | 5% ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login
Similar products
The DN-100 CR provides a practical wiring interface for field I/O connections. A single 100-pin SCSI II female connector feeds a pin-to-pin screw terminal block, so signals can be landed on screw terminals instead of being wired directly to the connector.Terminals are spaced at 3.81 mm (0.150 inch), and the board is intended for DIN-rail mounting in a 148 mm x 76 mm footprint. It is rated for an operating range of 0 ~ 60°C and a storage range of -20 ~ 70°C, with humidity of 5% ~ 90% RH, non-condensing.Choose the DN-100 CR when you need a compact, cabinet-friendly termination point for a 100-pin SCSI II connection. The board is CE, UKCA, FCC, RoHS and WEEE listed according to the manufacturer's data.ApplicationsField wiring termination for 100-pin SCSI II data acquisition daughter board I/O
DN-09-2 CR is a DIN-rail mounted breakout board that gives two 9-pin male D-sub connectors a pin-to-pin screw terminal interface, so field wiring can be terminated without working directly on the connector pins. The terminal pitch is 5.08 mm.The order includes two CA-0915 DB9 male to DB9 female cables for RS-232 (Pin 1 to Pin 9, 1.5 m), which allows the board to be connected straight away to a compatible DB9 port.The board measures 103 mm x 86 mm and is rated for 0 ~ 60°C operation and -20 ~ 70°C storage at 5% ~ 90% RH, non-condensing. It is CE, UKCA, FCC, RoHS and WEEE listed according to the source data.ApplicationsTerminating DB9 signals on a DIN-rail screw terminal boardConnecting DB9 cabling to field wiring
DN-09-2F CR is a DIN-rail breakout board that brings the signals of two male 9-pin D-sub connectors out to screw terminals, so field wiring can be connected without custom cabling. Each DB9 pin maps directly to its corresponding screw terminal.The ordering code includes two CA-0910F cables, each a 1 m DB9 female to DB9 female cable wired for RS-232 (Pin1-Pin9), allowing the board to be connected straight to a compatible DB9 port. The board measures 103 mm x 86 mm and mounts on a DIN rail with a 5.08 mm terminal pitch.Rated for an operating temperature of 0 ~ 60°C and a storage temperature of -20 ~ 70°C, at 5% ~ 90% RH non-condensing. Certified CE, UKCA, FCC, RoHS and WEEE.ApplicationsBreaking out D-sub I/O to screw terminals on a DIN rail
DN-20 CR is a DIN-rail mounted I/O connector block that breaks out two 20-pin headers to pin-to-pin screw terminals, giving engineers a practical way to wire field signals in a control cabinet instead of terminating flat cables directly.Each 20-pin header is routed to its own set of screw terminals at a 5.08 mm pitch, so the wiring can be checked and serviced without disturbing the cable connections. The board is supplied with two CA-2010 flat cables, each 20-pin and 1 m long, for connection to the header side.The board is rated for 0 ~ 60°C operation and carries CE, UKCA, FCC, RoHS and WEEE certification marks. Overall dimensions are 147 mm x 75 mm.ApplicationsField wiring for 20-pin header I/O connectionsControl cabinet installation on DIN-rail