DB-24C/D/DIN 24-ch Open Collector Output Board, DIN-rail Mount
24-channel NPN open-collector digital output daughter board with optical isolation, DIN-rail mounting and a CA-3710 DB37 cable included.
- 24 NPN open-collector digital outputs in four isolated banks
- Load current of 100 mA/30 VDC on 16 channels and 600 mA/30 VDC on 8 channels
- Maximum load voltage of 30 VDC
- 3750 Vrms isolation
- LED indication of output status
- Screw terminals for straightforward field wiring
€205.00 per piece
| 1-9 pcs | €205.00 | |
|---|---|---|
| 10-30 pcs | €194.00 | −5 % |
| 31+ pcs | €184.00 | −10 % |
Product information "DB-24C/D/DIN 24-ch Open Collector Output Board, DIN-rail Mount"
The DB-24C/D/DIN CR provides 24 NPN open-collector digital outputs, split across four electrically separate banks for isolation. It suits engineers who need to switch loads such as relays, indicators or solenoids from a DAQ system, with each channel's status shown by an LED.
This variant is supplied for DIN-rail mounting and ships with a CA-3710 DB37 male-to-male cable (45°, 1 M). Field wiring is made through screw terminals, and the board is rated for a 3750 Vrms isolation level and a maximum load voltage of 30 VDC.
Choose this variant when you want the output board mounted on a DIN rail rather than the standard DB-24C configuration, which includes a 50-pin flat cable.
Applications
- On/off control
- Energy management
- Test automation
- Process control
| Product type: | DAQ daughter board |
|---|---|
| Digital outputs: | 24 |
| Isolation: | 3750 Vrms |
| Operating temperature: | 0 ~ 60 °C |
| Mounting: | DIN-rail |
Specifications
| Digital Output | |
|---|---|
| Channels | 24 |
| Type | Open Collector |
| Load Current | (100mA/30Vdc)x16; (600mA/30Vdc)x8 |
| Response Speed | 1 kHz (Typical) |
| Isolation | 3750 Vrms |
| Power | |
| Consumption | 400 mA @ 5 V |
| Mechanical | |
| Dimensions (mm) | 170 mm x 114 mm |
| Environment | |
| Operating Temperature | 0 ~ 60°C |
| Storage Temperature | -20 ~ 70°C |
| Humidity | 5% to 90 % noncondensing |
Specifications as published by the manufacturer. Subject to change.
Login
Similar products
The DB-24C/DIN provides 24 NPN open-collector outputs, optically isolated and grouped into four isolated banks. It is intended for switching loads from OPTO-22 compatible data acquisition boards, and the DIN-rail variant suits panel-mounted installations.Channel status is shown by LEDs, and field wiring is made on screw terminals. The board offers a mix of 100 mA and 600 mA per-channel load ratings at 30 VDC, so it can be matched to the load on each output. The CA-5015 flat cable (50-pin, 1.5 m) is included with this ordering code.Typical uses include on/off control, energy management, test automation and process control. The board is RoHS and WEEE certified and is rated for 0 ~ 60 °C operation.ApplicationsOn/off controlEnergy managementTest automationProcess control
The DB-24C/D CR provides 24 optically isolated digital outputs, arranged in four isolated banks, for switching loads from an OPTO-22 compatible board or other DAQ setup.Each channel uses an NPN open-collector output. Sixteen channels are rated at 100 mA and eight at 600 mA, both at 30 VDC. Isolation is 3750 Vrms, and typical response speed is 1 kHz. Output status is shown by LEDs, and field wiring is made through screw terminals.The board connects directly to OPTO-22 compatible boards and has an OPTO-22 compatible connector, a 37-pin D-sub connector and a 20-pin connector. This /D variant ships with the CA-3710 DB37 male-to-male cable (45°, 1 m), whereas the DB-24C CR is supplied with the CA-5015 50-pin flat cable (1.5 m). The board has an operating range of 0 ~ 60 °C.ApplicationsOn/off controlEnergy managementTest automationProcess control
The DB-24C CR adds 24 NPN open-collector digital outputs to a data acquisition setup. The outputs are split into four separately isolated groups, which helps keep field wiring apart from the host side and suits switching duties such as on/off control and process control.Current ratings differ by channel group: 16 channels are rated 100 mA and 8 channels 600 mA, both at 30 Vdc. Each output has an LED status indicator, and the screw terminals simplify field wiring. The board connects directly to OPTO-22 compatible boards through its OPTO-22 connector, with a 37-pin D-sub and a 20-pin connector also fitted.This CR ordering code includes a CA-5015 flat cable (50-pin, 1.5 m). Typical use cases include energy management and test automation. The module is RoHS and WEEE certified.ApplicationsOn/off controlEnergy managementTest automationProcess control
DB-24OD is a DAQ daughter board that provides 24 optically isolated open-drain digital outputs, grouped into four isolated banks. Each channel handles a maximum load of 400 mA at 10 ~ 24 VDC, making it suitable for switching loads from a DAQ system.The board offers three connection options: an OPTO-22 compatible connector, a 37-pin D-sub connector and a 20-pin connector. Screw terminals simplify field wiring, and LEDs indicate relay status. The package includes a CA-3710 DB37 male-to-male cable (45º, 1 m).Typical uses include on/off control, energy management, test automation and process control. The board is rated for 0 ~ 60 °C operation and has a 3750 Vrms isolation rating.ApplicationsOn/off controlEnergy managementTest automationProcess control