CAN-8424-G DeviceNet Remote I/O Unit, 4 I/O Slots
DeviceNet remote I/O unit with four expansion slots for modular I/O, supporting Poll, Bit-Strobe and Change of State/Cyclic operation on up to 64 nodes.
- Implements DeviceNet Specification Volume I and II, Release 2.0
- Four slots for modular I/O expansion
- Poll, Bit-Strobe and Change of State/Cyclic I/O operating modes
- Up to 128 bytes of fragmented input and output I/O
- Rotary switches for MAC ID (0 ~ 63) and baud rate (125 k, 250 k, 500 k)
- 3000 VDC DC-to-DC and 2500 Vrms photo-coupler isolation
€412.00 per piece
| 1–9 pcs | €412.00 | |
|---|---|---|
| 10–30 pcs | €400.00 | −3 % |
| 31+ pcs | €392.00 | −5 % |
Product information "CAN-8424-G DeviceNet Remote I/O Unit, 4 I/O Slots"
The CAN-8424-G is a DeviceNet remote I/O unit built around a modular backplane with four slots, so engineers can assemble the I/O mix their application needs. It suits data acquisition and control tasks where a DeviceNet network needs local I/O under a single controller.
Configuration is handled with the CAN-8424 Utility, which connects through the RS-232 utility port. The tool generates the EDS file for the I/O modules fitted, so the unit can be integrated into a DeviceNet scan list without manual device description work.
- Supports Poll, Bit-Strobe and Change of State/Cyclic I/O operating modes
- Rated for the DC power range of +10 VDC to +30 VDC, with a typical consumption of 2.5 W
- Designed for DIN-rail mounting within an operating range of -25 ~ +75 ℃
Applications
- Diagnostic systems for wheeled tractors
| Product type: | Remote I/O unit |
|---|---|
| Interface: | DeviceNet |
| Protocol: | DeviceNet |
| Ports: | 1 DeviceNet, 1 RS-232 |
| Isolation: | 3000 VDC / 2500 Vrms |
| Power input: | +10 ~ +30 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186, 80 MHz or compatible |
| EEPROM | 16 KB |
| Flash | 512 KB |
| NVRAM | 31 bytes (battery backup, data valid for up to 10 years) |
| SRAM | 512 KB |
| Real Time Clock | Yes |
| Watchdog Timer | Watchdog IC |
| LED Indicators | |
| Status | 1 x Power 2 x DeviceNet status |
| I/O Expansion | |
| Slots | 4 slots |
| COM Ports | |
| Ports | 1 x RS-232 (Utility Port) 9-pin male D-Sub (DTE: RxD, TxD, RTS, CTS, DTR, DSR, RI, GND) |
| DeviceNet | |
| Controller | NXP SJA1000T with 16 MHz clock |
| Ports | 1 |
| Connection Supported | 1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O 1 connection for COS/Cyclic I/O |
| Baud Rate | 125 k, 250 k, 500 k |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Specification | Volume I, Release 2.0 & Volume II, Release 2.0 |
| Node ID | 0 ~ 63 |
| Shutdown Message | Yes |
| Subscribe | Group 2 Only Server |
| Power | |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 2.5 W |
| Mechanical | |
| Dimensions (mm) | 188 x 132 x 91 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Login