ET-2218HS-16 Ethernet I/O Module, 16-ch High-Speed Thermocouple Input
16-channel thermocouple input module with 100 Hz fast mode, open wire detection and a built-in 2-port Ethernet switch for daisy-chain wiring. Supports Modbus TCP/UDP, MQTT and SNMP V2c.
- 16 thermocouple input channels with 16-bit resolution and ±0.1% of FSR accuracy
- Fast Mode sampling at 100 Hz per channel, or Normal Mode at 1.5 Hz
- Supports thermocouple types J, K, T, E, R, S, B, N, C, L, M and L DIN43710
- Built-in 2-port 10/100 Base-Tx switch with LAN bypass for daisy-chain wiring
- Modbus TCP/UDP, MQTT and SNMP V2c protocols with built-in web server configuration
- 3000 VDC I/O isolation and EFT, ESD and surge protection
716,00 € per piece
| 1–9 pcs | 716,00 € | |
|---|---|---|
| 10–30 pcs | 694,00 € | −3 % |
| 31+ pcs | 680,00 € | −5 % |
Informácie o výrobku "ET-2218HS-16 Ethernet I/O Module, 16-ch High-Speed Thermocouple Input"
The ET-2218HS-16 CR is an Ethernet I/O module that brings 16 thermocouple inputs onto a network. Each channel can be configured individually and sampled at up to 100 Hz in Fast Mode, with open wire detection to flag broken sensor circuits. Automatic cold-junction compensation is applied across all channels, so engineers can connect standard thermocouple types without external reference hardware.
A built-in 2-port 10/100 Base-Tx switch with LAN bypass allows modules to be daisy-chained along the network, reducing cabling and switch infrastructure. Configuration is done through the built-in web server, and the module reports data over Modbus TCP/UDP, MQTT and SNMP V2c. Firmware can be updated via Ethernet.
For electrically noisy plants, the module offers EFT, ESD and surge protection and 3000 VDC I/O isolation. It is housed in a metal casing, mounts on DIN-rail or wall, and is rated for -25 ~ +75 °C operation.
Applications
- SMD assembly manufacturing
- PC board manufacturing
- Footwear manufacturing
- Food industry
- Pharmaceutical industry
- Any temperature measurement application in industry
| Product type: | Ethernet I/O Module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP/UDP, MQTT, SNMP V2c |
| Analog inputs: | 16 |
| Ports: | 2 |
| Isolation: | 3000 VDC |
| Power input: | +10 ~ +48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Metal |
Specifications
| Software | |
|---|---|
| Built-in Web Server | Yes |
| CPU Module | |
| CPU | 32-bit ARM |
| Watchdog Timer | Module, Communication (Programmable) |
| Isolation | |
| 2-way Isolation | Ethernet: 1500 VDC I/O: 3000 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±4 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | Run, Ethernet |
| Analog Input | |
| Channels | 16 |
| Sensor Type | Thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710) |
| Resolution | 16-bit |
| Accuracy | ±0.1% of FSR |
| Sampling Rate | Normal Mode: 1.5 Hz (per channel) Fast Mode: 100 Hz (per channel) |
| Overvoltage Protection | 30 VDC |
| Individual Channel Configuration | Yes |
| Open Wire Detection | Yes |
| Ethernet | |
| Ports | 2 x RJ-45, 10/100 Base-Tx, Switch Ports |
| LAN bypass | Yes |
| Access Control | Password and IP Filter |
| Protocol | Modbus TCP, Modbus UDP, MQTT, SNMP V2c |
| Power | |
| Reverse Polarity Protection | Yes |
| Consumption | 2 W (max.) |
| Powered from Terminal Block | +10 ~ +48 VDC |
| Mechanical | |
| Casing | Metal |
| Dimensions (mm) | 54 x 196 x 113 (W x L x H) |
| Installation | DIN-Rail mounting / Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Prihlásiť sa