PPDS-743D-MTCP Serial-to-Ethernet Device Server, 3x RS-232, 1x RS-485, PoE
Programmable device server linking three RS-232 ports and one RS-485 port to Ethernet, with 4 DI, 4 DO, PoE and a Modbus TCP to RTU/ASCII gateway function.
- Three RS-232 ports and one RS-485 port bridged to Ethernet via a 10/100 Base-TX RJ-45 connection
- Modbus TCP to RTU/ASCII gateway for SCADA and HMI integration
- Programmable device server with the Xserver structure and built-in MiniOS7
- VxComm driver and utility for Virtual COM ports on 32/64-bit Windows 7 SP1, 10, 2012 and 2016
- 4 digital inputs supporting latched D/I and counter functions
- 4 open-collector digital outputs, sink (NPN), 30 VDC max., 100 mA max.
332,00 € per piece
| 1-9 pcs | 332,00 € | |
|---|---|---|
| 10-30 pcs | 322,00 € | −3 % |
| 31+ pcs | 316,00 € | −5 % |
Informácie o výrobku "PPDS-743D-MTCP Serial-to-Ethernet Device Server, 3x RS-232, 1x RS-485, PoE"
The PPDS-743D-MTCP is a programmable device server that brings legacy serial equipment onto an Ethernet network. It provides two 3-wire RS-232 ports, one 5-wire RS-232 port and one RS-485 port, so existing serial devices can be connected to Ethernet without replacing them. The VxComm driver and utility can map the built-in COM ports to standard COM ports on a Windows PC.
Beyond serial bridging, the unit runs the built-in MiniOS7 and the Xserver programming structure, so custom Ethernet applications can be developed on the device. It also acts as a Modbus TCP to RTU/ASCII gateway for SCADA and HMI systems that speak Modbus TCP. Four digital inputs with latched and counter functions and four open-collector digital outputs handle local signals alongside the serial traffic.
Power can be supplied over Ethernet via IEEE 802.3af (Class 1) PoE, or from a +12 ~ 48 VDC terminal block. The unit is supplied with the CA-0910 cable, mounts on a DIN-rail or wall, and is rated for an operating range of -25 ~ +75 °C.
Applications
- Factory Automation
- Building Automation
- Home Automation
| Product type: | Serial-to-Ethernet device server |
|---|---|
| Interface: | Ethernet, RS-232, RS-485 |
| Protocol: | Modbus TCP |
| Digital inputs: | 4 |
| Digital outputs: | 4 |
| Ports: | 4 serial, 1 Ethernet |
| PoE: | IEEE 802.3af |
| Power input: | +12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | DIN-rail, Wall |
| Housing: | Plastic |
Specifications
| CPU Module | |
|---|---|
| CPU | 80186-80 MHz or compatible |
| EEPROM | 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles. |
| Flash | 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles |
| SRAM | 512 KB |
| Watchdog Timer | Yes |
| LED Indicators | |
| Status | 1 x Power/PoE 5 x digit 7 Segment |
| Digital Input | |
| Channels | 4 |
| Type | Dry Contact |
| Sink/Source (NPN/PNP) | Source, Common Ground |
| ON Voltage Level | +3.5 ~ +30 V |
| OFF Voltage Level | +1 V max. |
| Digital Output | |
| Channels | 4 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink (NPN) |
| Load Voltage | 30 VDC, max. |
| Load Current | 100 mA, max. |
| Ethernet | |
| Ports | 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator) |
| COM Ports | |
| Ports | 2 x 3-wire RS-232 1 x 5-wire RS-232 1 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Bias Resistor | Yes, 1 KΩ |
| Parity | None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1/COM2. |
| Data Bit | 7, 8: for COM1 and COM2 5, 6, 7, 8: for COM3 ~ COM4 |
| Stop Bit | 1, 2: for COM1 ~ COM4 |
| Node Address | 254 (max.) |
| Power | |
| Consumption | 2.9 W |
| Powered from PoE | IEEE 802.3af, Class 1 |
| Powered from Terminal Block | +12 ~ 48 VDC |
| Mechanical | |
| Casing | Plastic |
| Dimensions (mm) | 72 mm x 35 mm x 123 mm (W x L x H) |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Prihlásiť sa