DN-8368GB 3-axis Stepper/Servo Motion Control Terminal Board, General Purpose
3-axis terminal board for pulse-command stepper or servo motors, designed as a daughter board for ICP DAS 6-axis motion controllers, with high-speed photo-coupling isolation.
- Three-axis pulse-command interface for stepper or servo motors
- Designed as a daughter board for 6-axis ICP DAS motion controllers, two boards per six axes
- High-speed photo-coupling isolation to protect the controller
- Screw terminal connectors; interchangeable connectors allow axis reassignment without rewiring
- Per-axis encoder feedback and home, near-home and limit switch inputs
- Servo I/O signals per axis: Srv_On, ERC, ALM_RST, RDY, Alarm and INP
235,00 € per piece
| 1–9 pcs | 235,00 € | |
|---|---|---|
| 10–30 pcs | 228,00 € | −3 % |
| 31+ pcs | 223,00 € | −5 % |
Informácie o výrobku "DN-8368GB 3-axis Stepper/Servo Motion Control Terminal Board, General Purpose"
DN-8368GB is a general-purpose daughter board that extends ICP DAS 6-axis motion controllers such as the PISO-PS600, PISO-VS600 and PMDK. Each board handles three axes, so two boards are needed to cover all six. It suits pulse-command stepper motors and servo motors.
Each axis group brings out its pulse output lines, encoder feedback, home, near-home and limit switch inputs, and a set of servo signals (Srv_On, ERC, ALM_RST, RDY, Alarm and INP). Signals terminate on screw terminals, and the connectors can be swapped to reassign an axis without rewiring. On-board isolation protects the controller, and an on-board power module supplies the internal circuitry.
Choose the DN-8368GB when a general-purpose interface is required. The sister DN-8368MB is built for direct connection to the Mitsubishi MINAS-J2S servo amplifier series.
Applications
- Multi-axis stepper motor motion control
- Servo motor motion control with pulse command drives
- Motion control systems built around ICP DAS 6-axis controllers
| Product type: | Motion control daughter board |
|---|---|
| Interface: | Screw terminal |
| Isolation: | Photo-coupling |
| Power input: | 20 ~ 26 VDC |
| Operating temperature: | -20 ~ +75 °C |
Specifications
| Power | |
|---|---|
| Input Range | 20 ~ 26 VDC, 0.5 A |
| Consumption | 12 W (24 VDC) |
| Mechanical | |
| Dimensions (mm) | 162 mm X 107 mm |
| Environment | |
| Operating Temperature | -20 ~ +75 °C |
| Storage Temperature | -30 ~ +85 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Prihlásiť sa