Industrial I/O, controllers and communication

The PET-7017-10 is a PoE-powered Ethernet analog input module for engineers who need voltage or current measurement on a networked I/O node. Its inputs can be set as 10 differential or 20 single-ended channels in software, and each channel can be given its own range, so one module can serve mixed sensor types on the same network.Each channel offers a choice of voltage ranges from ±150 mV to ±10 V and current ranges of ±20 mA, 0 ~ 20 mA and 4 ~ 20 mA, selected with jumpers. Resolution is 16-bit, and the module has two sampling modes: normal mode at 10 Hz total and fast mode at 50 Hz total. Open wire detection is available for 4 ~ 20 mA inputs, and differential channels are rated for 240 Vrms overvoltage protection.Configuration and monitoring are handled through a built-in web server with Web HMI, and the module supports Modbus TCP and Modbus UDP. Access is controlled by ID, password and IP filter. The unit is powered either from PoE (IEEE 802.3af, Class 1) or from a +12 ~ +48 VDC terminal block, and it mounts on a DIN rail.ApplicationsBuilding automationFactory automationMachine automationRemote maintenanceRemote diagnosisTesting equipment

The CAN-2012C is a CANopen slave analog input module that brings 16-bit measurements onto a CAN bus network. It provides 8 differential or 16 single-ended inputs, selectable in software, and covers voltage ranges of ±10V, ±5V, ±2.5V and 0~10V as well as current ranges of ±20mA, 0~20mA and 4~20mA. Each channel can be configured individually.Built for CANopen networks, the module follows CiA 301 v4.02 and CiA 401 v2.1 and operates as an NMT slave with Node Guarding and Heartbeat error control. A default EDS file is provided for use with standard CANopen master software, and the module has passed the CiA CANopen conformance test tool, which simplifies commissioning with masters from ICP DAS or other manufacturers.Electrical features include 4 kV contact ESD protection on each channel, support for a 10 to 30 VDC supply, and isolation rated at 2500 Vrms for photo-coupling and 3000 VDC for DC-to-DC. The module mounts on DIN-rail and operates from -25 to +75 °C.ApplicationsIndustrial machinery controlFactory automationPackaging machine controlRemote data acquisitionEnvironmental monitoringVehicle control systemsMedical equipment control

The CAN-2015C CR connects eight RTD sensors to a CANopen network as a slave device. Each channel accepts 2-wire or 3-wire RTD sensors, with 16-bit resolution and an accuracy of +/-0.05% FSR. Engineers can read RTD values or configure the module over standard CANopen messaging.The module follows CiA 301 v4.02 and CiA 401 v2.1 and has passed validation with the CiA CANopen Conformance Test tool. A default EDS file is provided, so it can be added to a standard CANopen master with minimal configuration effort. It also works with the CANopen masters offered by ICP DAS.Diagnostic and protection features include open wire detection, individual channel configuration, a built-in 120Ω terminal resistor and 4 kV contact ESD protection on each channel. The unit runs from +10 ~ +30 VDC and is intended for DIN-rail mounting, with an operating range of -25 ~ +75 °C.ApplicationsIndustrial machine controlFactory automationPackaging machine controlRemote data acquisitionEnvironmental monitoringVehicle control systemsMedical equipment control

The CAN-2017C CR is a CANopen slave module that brings eight differential analog inputs onto a CANopen network. It suits engineers who need to read sensor signals over CAN bus using the standard CANopen protocol, with input status and channel settings accessed through conventional CANopen objects rather than custom code.Each channel offers 16-bit resolution and a choice of input ranges from ±10 V down to ±150 mV, plus -20 mA to +20 mA when an optional external 125 Ω resistor is fitted. Channels can be configured individually, and the module supports Dynamic PDO alongside event-triggered, remotely requested, cyclic and acyclic SYNC transmission modes.The module has passed validation with the CiA CANopen Conformance Test tool and includes a default EDS file. It operates from +10 to +30 VDC, provides 3000 VDC isolation and is designed for DIN-rail installation across an operating range of -25 to +75 °C. The CR ordering code is the RoHS version of the module.ApplicationsIndustrial machine controlFactory automationVehicle control systemsMedical equipment controlRemote data acquisitionEnvironmental monitoringPackaging machine control

The CAN-2017D brings eight differential analog inputs onto a DeviceNet network as a general I/O slave. Input status can be read and the channel configuration set over the network, using the EDS file supplied for the DeviceNet master, so the module can be commissioned without custom firmware.It acts as a Group 2 Only Server (non UCMM-capable) and uses the predefined master/slave connection set, with one connection each for explicit messaging, polled I/O and bit-strobe I/O. Heartbeat and shutdown messages are supported. The manufacturer lists communication with Allen-Bradley 193-DNENCAT and 193-DNENCATR gateways and several OMRON DeviceNet masters.Operating temperature -25 ~ +75 ℃, DIN-rail mounted, supplied from +10 VDC to +30 VDCApplicationsIndustrial machine controlFactory automationRemote data acquisitionEnvironmental monitoringPackaging machine controlMedical equipment controlAircraft engine monitoring

The CAN-2022C CR is a CANopen slave I/O module that brings mixed analog and digital signals onto a CAN bus network. It combines two differential 16-bit analog inputs, two 12-bit analog outputs, four isolated wet-contact digital inputs and four isolated open-collector digital outputs in one DIN-rail unit, so a single node can cover a range of sensing and actuation tasks.Engineers typically choose this module when they need standard CANopen integration. It implements the NMT slave role and follows CiA 301 v4.02 and CiA 401 v2.1, and it has passed validation with the CiA CANopen conformance test tool. A default EDS file is supplied, so the module can be added to a standard CANopen master by importing that file, and the process data objects offer event-triggered, remotely requested, cyclic and acyclic SYNC transmission modes.The CR ordering code is listed with RoHS compliance. The module draws 1.8 W from a 10 ~ 30 VDC supply and is rated for an operating temperature of -25 ~ +75 °C. Its built-in 120 Ω terminal resistor, selectable baud rates from 10 k to 1 M and node IDs from 1 to 99 simplify bus commissioning.ApplicationsIndustrial machine controlFactory automationPackaging machine controlRemote data acquisitionEnvironmental monitoringMedical equipment controlAircraft engine monitoring

The CAN-2024C CR is a DIN-rail CANopen slave module that drives four analogue outputs at 14-bit resolution. It suits engineers who need to control field actuators such as valves, drives and transducer inputs from a CANopen network without building custom fieldbus firmware.Each channel can be configured for 0~5 V, ±5 V, 0~10 V, ±10 V, 0~20 mA or 4~20 mA output. Voltage output accuracy is ±0.1 % of FSR and current output accuracy is ±0.2 % of FSR. The module provides a hardware watchdog, a power-on value setting, and 3000 VDC isolation for DC-to-DC, with 2500 Vrms photo-coupler isolation on the CANopen side.The module supports NMT slave operation, 10 RxPDOs and 10 TxPDOs with PDO mapping, and node IDs from 1 to 99. A default EDS file is provided, so it can be commissioned with other standard CANopen masters. The unit runs from +10 to +30 VDC, draws 2.5 W, and operates between -25 and +75 °C.ApplicationsIndustrial machine controlFactory automationPackaging machine controlRemote data acquisitionEnvironmental monitoring

The CAN-2024D is a DeviceNet general I/O slave that brings four 14-bit analog outputs onto a DeviceNet network. It is a Group 2 Only Server (non UCMM-capable) and supports the Predefined Master/Slave Connection Set, so it suits networks where a DeviceNet master polls the module for its output values.Each channel can be set to one of six voltage or current ranges, with a 0.1 % of FSR accuracy specification for voltage output and 0.2 % of FSR for current output. Output status and configuration are accessed through the DeviceNet EDS file, and the module supports heartbeat and shutdown messages for network supervision.The manufacturer lists communication with the following masters and gateways: Allen-Bradley 193-DNENCAT and 193-DNENCATR, and OMRON CJ1W-DRM21, CS1W-DRM21-V1, C200HW-DRM21-V1 and 3G8F7-DRM21-E. Order code CAN-2024D CR is the RoHS-compliant variant, mounts on DIN-rail and operates from a +10 to +30 VDC supply.ApplicationsFactory automationMachine controlPackaging machine controlRemote analog output control on DeviceNet networks