MN-SERVO-PA4 Motionnet Single-axis Motion Control Module, Panasonic MINAS A4
Single-axis Motionnet motion control module with spring-type terminal blocks, plugged directly into Panasonic MINAS A4 servo drivers and connected serially over Cat.5 LAN cable.
- Up to 64 axes per Motionnet line at up to 20 Mbps communication speed
- Pulse output up to 6.6 MHz in OUT/DIR and CW/CCW modes
- Multi-axis linear and 2-axis circular interpolation
- T/S-curve acceleration and deceleration, with speed and position changes on the fly
- Home, slow-down and positive/negative limit sensor inputs for each axis, plus software limits and compare trigger output
- Three-way isolation for power, communication and I/O; 1000 V isolated power input
264,00 EUR per piece
| 1–9 pcs | 264,00 EUR | |
|---|---|---|
| 10–30 pcs | 256,00 EUR | −3 % |
| 31+ pcs | 251,00 EUR | −5 % |
Termékinformációk "MN-SERVO-PA4 Motionnet Single-axis Motion Control Module, Panasonic MINAS A4"
The MN-SERVO-PA4 CR adds a single motion axis to a Motionnet distributed control network and mounts straight onto a Panasonic MINAS A4 servo driver. Modules are linked in series with standard Cat.5 LAN cable, which reduces driver-to-controller wiring in compact machine designs.
Each module handles pulse output at up to 6.6 MHz, encoder input, and the servo interface signals (SVON, ERC, ALM_RST, ALM, RDY, INP). Per-axis limit, home and slow-down sensor inputs, software limits and a position compare trigger output support safe, repeatable motion sequences. One Motionnet line can carry up to 64 axes.
Three-way isolation between power, communication and I/O improves noise immunity and protects the device. Spring-type terminal blocks are fitted as standard, so no additional terminal board is needed. The module operates from 0 to +60 °C.
Applications
- Distributed single-axis motion control on Panasonic MINAS A4 servo drivers
- Highly integrated machine automation
| Product type: | Motion control module |
|---|---|
| Interface: | Motionnet |
| Protocol: | Motionnet |
| Isolation: | 1000 V |
| Power input: | 24VDC +/-5% |
| Operating temperature: | 0 ~ +60 °C |
Specifications
| LED Indicators | |
|---|---|
| Status | Communication state (Link, Error) Internal 3.3 V Power Termination Resistor Switch Mechanic Switch Input |
| General | |
| Speed Profile | Trapezoidal/S Shaped Acc/Dec Driving |
| Auto-Home Search | 13 Types |
| Axis I/O | |
| Servo Interface Output | SVON, ERC, ALM_RST |
| Latch Input | Yes (shared with SD) |
| Mechanical Switch Input | LMT+, LMT-, HOME, SD, EMG |
| Position Compare Output | High-Speed 5 V TTL or 24 V open collector |
| Servo Interface Input | ALM, RDY, INP |
| Encoder Input | |
| Mode | CW/CCW, A/B phase |
| Counter Width | 28-bit |
| Pulse Output | |
| Mode | OUT/DIR, CW/CCW |
| Counter Width | 28-bit |
| Rate | 6.6 MHz (Max.) |
| Motionnet | |
| Communication Connectors | Spring Type Terminal Blocks |
| Transfer Speed | 2.5, 5, 10, 20 Mbps |
| Power | |
| Input Range | 24VDC +/-5% (1000 V isolated) |
| Environment | |
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +80°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Bejelentkezés