VPD Series

VPD-130-H CR is a 3.5-inch touch HMI for operator control and monitoring in automation systems. Its 240 x 320 colour TFT touch screen and single RS-232/RS-485 serial port suit both new installations and retrofits of existing equipment.The unit includes a real-time clock, 16 MB SDRAM and 16 MB Flash, a buzzer, a rotary switch and a rubber keypad with five programmable keys. The front panel is rated IP65, and the device runs from a +12 ~ 48 VDC terminal block with a consumption of 2 W.Applications are built with the free HMIWorks tool, which provides GUI design, Ladder Designer for PLC users and C language support for software developers, including user-defined third-party protocols. XV-Board I/O expansion boards are available for this series.ApplicationsOperator interfaces for automation and machine controlMonitoring and control of remote I/OSystem retrofits and new installations

VPD-130-H2 CR is a 3.5-inch touch HMI from the TouchPAD VPD H Series, offering a 240 x 320 TFT colour touch screen with 65535 colours. It suits operator panels on machines and automation systems where a compact, low-cost interface with serial connectivity is required.The unit provides a single RS-232/RS-485 serial port with Self-Tuner for communication with controllers and remote devices. A real-time clock, 16 MB SDRAM and 16 MB Flash are built in, and the front panel is rated IP65. The rubber keypad includes five programmable keys, a rotary switch, buzzer and reset button.Screens are created in the free HMIWorks development software, which offers GUI design, Ladder Designer for PLC-oriented programmers and C language support for user-defined third-party protocols. Power is supplied from a +12 ~ 48 VDC terminal block, and the unit mounts on DIN-rail or panel.ApplicationsOperator panels for machine and automation controlMonitoring and control of remote I/O in automation systemsSystem retrofits and new installations

VPD-130N-H is a compact 3.5 inch colour touch HMI from the VPD series, built around a 240 x 320 TFT display with 65535 colours. It gives operators a graphical front end for machine and process control, with a touch screen, buzzer, rotary switch and reset button on the unit.Connectivity centres on a single RS-232/RS-485 serial port with self-tuner, which suits serial links to controllers and remote devices. A real-time clock is included for time-stamped operation. The VPD-130N-H has no Ethernet port; the source lists Ethernet only for the VPD-133-H and VPD-133N-H.The unit mounts on DIN-rail or in a panel, with an IP65-rated front panel and a 12 to 48 VDC supply. Screens are developed in the free HMIWorks software, which offers GUI design, Ladder Designer for PLC users and C language for custom programming. Ordering code VPD-130N-H CR is the item supplied.ApplicationsOperator interface for machine and control panelsSystem retrofits and new installationsSerial-connected monitoring and control of remote I/O

VPD-130N-H2 CR is a 3.5-inch touch HMI device from the VPD Series, built around a 240 x 320 TFT colour touch screen with 65535 colours. It suits engineers who need a compact operator panel with a single serial port for connecting to a controller or remote I/O, on either new installations or retrofits of existing systems.The unit uses a 32-bit RISC CPU with 16 MB SDRAM and 16 MB Flash, and includes a real time clock and a buzzer. The front panel is rated IP65 and the unit can be fitted to a DIN rail or a panel. It is powered from a terminal block at +12 ~ 48 VDC, drawing 2 W. Ethernet is not fitted on this N variant; the source notes that Ethernet is available only on the VPD-133-H and VPD-133N-H.Screens are developed in the free HMIWorks software, which offers graphical screen design, Ladder Designer for PLC-oriented users and a C language environment. The 20,000-hour backlight rating and non-volatile storage support dependable operation in demanding industrial environments.ApplicationsOperator interfaces for industrial automation systemsControl and monitoring of I/O at remote sidesNew system installations and complete system retrofitsMachine panels in rugged environments

VPD-133-H2 CR is a 3.5-inch touch HMI from the TouchPAD VPD series, suited to engineers who need a compact operator panel with network connectivity. The 240 x 320 TFT display offers 65535 colours, and a 5-key programmable rubber keypad, rotary switch and buzzer complement the touchscreen for operators who need physical controls.This ordering code provides two serial ports, one configurable as RS-232 or RS-485 and one RS-485, plus an RJ-45 Ethernet port with PoE (IEEE 802.3af, Class 1). The built-in real time clock and 16 MB SDRAM/16 MB Flash storage support data logging and time-stamped operation. Power can be taken from PoE or from a +12 ~ 48 VDC terminal block.Application programs are built with the free HMIWorks software, which offers graphical screen design, Ladder Designer for PLC users and a C language environment. The front panel is rated IP65 and the unit is designed for DIN-rail or panel mounting. Expansion is possible with XV-Boards.ApplicationsOperator interfaces for new automation system installationsRetrofits of existing control systemsRemote control and monitoring of I/O in automation systemsMachine and panel-mounted local control with graphical screens

The VPD-133N-H2 is a 3.5-inch touch HMI device from the VPD Series, combining a 240 x 320 colour TFT touch screen with serial and Ethernet connectivity. It suits engineers who need a compact operator interface that can be networked and powered over a single Ethernet cable.This variant includes Ethernet with PoE (IEEE 802.3af, Class 1) alongside one RS-232/RS-485 port and one RS-485 port, both with Self-Tuner. A real-time clock, buzzer, rotary switch and reset button are built in, and the front panel is rated IP65. A 12 to 48 VDC terminal block input is also provided for non-PoE installations.HMIWorks, the free development software for the VPD Series, supports graphical screen design, Ladder Designer for PLC users and C language programming. The unit also accepts XV-Board I/O expansion and user-defined third-party protocols written in C.ApplicationsOperator interfaces for industrial automation systemsRemote control and monitoring of I/O over Ethernet and serial linksMachine and panel-mounted control display in rugged environments

VPD-142-H CR is a 4.3" touch HMI device for operator control and monitoring in industrial automation. It combines a high-resolution colour TFT touchscreen with a rubber keypad, so it suits both touch-driven graphical screens and key-based operation on the machine floor.Two configurable RS-232/RS-485 serial ports allow the unit to communicate with controllers and remote devices. The real time clock supports time-stamped data handling, and firmware can be updated through the USB 1.1 client port. Ethernet is not fitted on this model; the VPD-143-H and VPD-143N-H variants provide it.Designed for DIN-rail or panel mounting, with a front panel rated IP65Powered from a terminal block at +12 ~ 48 VDC, consuming 2.5 WOperating range -20 ~ +50 °CApplicationsOperator interfaces for industrial automation systemsRetrofits of existing machines and control systemsLocal control and monitoring of I/O at remote sides via serial links

VPD-142N-H is a compact 4.3-inch touch HMI from the TouchPAD VPD series, combining a 480 x 272 colour TFT touchscreen with a 32-bit RISC CPU and 16 MB SDRAM/16 MB Flash. It is intended for operator panels that need to be added to existing automation systems or fitted into new installations without a large hardware budget.Two serial ports, each switchable between RS-232 and RS-485, allow the unit to exchange data with controllers and remote I/O. A real-time clock, buzzer, rotary switch, reset button and status LED support timestamping and basic local interaction. The front panel is rated IP65, and the unit mounts on a DIN rail or a panel.Application programs are developed with the free HMIWorks tool, which offers graphical screen design and both Ladder Designer and C language environments. Expansion is possible through XV-Boards, and the USB 1.1 client port is used for firmware updates.ApplicationsOperator panels and machine control interfacesRetrofit of existing automation systemsMonitoring and control of remote I/O over serial linksRugged industrial environments with a -20 ~ +50 °C operating range

VPD-143-H CR is a 4.3-inch touch HMI with a 480 x 272 colour TFT display. It pairs two RS-232/RS-485 serial ports with a 10/100 Base-TX Ethernet port that can be powered over PoE, so one device can sit on a plant network and talk to controllers and remote I/O without a separate power supply.The unit has a real-time clock, a buzzer, a programmable 5-key rubber keypad, a rotary switch and a reset button. The front panel is rated IP65, and the unit mounts on DIN-rail or panel. Operating range is -20 ~ +50 °C.Programming uses the free HMIWorks software, which supports graphical screen design, Ladder Designer for PLC-oriented users and C language for user-defined protocols. Firmware can be updated through the USB 1.1 client port or over the network. This listing is for ordering code VPD-143-H CR.ApplicationsOperator control and monitoring panels in automation systemsRetrofits of existing machines and control systemsMonitoring and control of remote I/O over Ethernet or serial links

VPD-143N-H CR is a 4.3-inch colour touch HMI from the VPD series, combining a 480 x 272 TFT display with two configurable serial ports and a 10/100 Base-TX Ethernet connection. Ethernet is powered over PoE (IEEE 802.3af), or the unit can be supplied from a +12 ~ 48 VDC terminal block.The device suits operator interfaces where you need to monitor and control equipment at remote locations over serial or Ethernet links, and where firmware can be updated from a central computer through the USB client port. The built-in real-time clock and non-volatile storage support time-stamped operation and reliable use in harsh conditions.Programming is handled with the free HMIWorks software, which offers graphical screen design, Ladder Designer for PLC-oriented users and a C language environment. The front panel is rated IP65, and the unit mounts on a DIN rail or a panel.ApplicationsOperator panels for industrial automation systemsMonitoring and control of I/O at remote sites over serial or EthernetRetrofits of existing automation systemsFirmware updates from a central computer

VPD-173N CR is a 7-inch touch HMI with a high-resolution colour TFT panel, designed to replace mechanical switches with programmable control pads. It combines a touch display, Ethernet connectivity and two configurable serial ports in one wall-mounted unit, which suits building, home and industrial control panels.Power can come from Power over Ethernet (IEEE 802.3af, Class 1) or from a +12 to +48 VDC terminal block. Two RS-232 or RS-485 ports, with 2500 VDC isolation, allow the device to communicate with serial equipment, while the real time clock supports time-stamped operation. The front panel is rated IP65 / NEMA 4.Application programs are built with the free HMIWorks software, which offers a Ladder Designer for PLC users and a C language environment for those who prefer programming. The manufacturer states that the Ladder Designer can be learned in no more than 30 minutes.ApplicationsBuilding automationHome automationIndustrial automation control panels

The VPD-173N-64 CR is a 7-inch touch HMI from the VPD Series, aimed at engineers who need a wall-mounted operator panel with serial and Ethernet connectivity. It combines an 800 x 480 TFT colour touch display with two RS-232 or RS-485 serial ports, so it can talk to field devices over either standard without an additional converter.Power can come from PoE (IEEE 802.3af, Class 1) or from a +12 ~ 48 VDC terminal block, which simplifies cabling where an Ethernet drop is already present. The -64 variant provides 64 MB SDRAM and 64 MB Flash, and the real-time clock, buzzer, rotary switch and reset button support time-stamped and user-interactive applications.Programming is handled by the free HMIWorks tool, which offers a Ladder Designer for PLC users and a C language environment for software-focused users. The front panel is rated IP65 / NEMA 4, and the unit mounts on a wall.ApplicationsBuilding automationHome automationIndustrial automation

The VPD-173X CR is a 7-inch touch HMI from the VPD series, built for wall-mounted control panels in building, home and industrial automation. Its 800 x 480 TFT colour touch screen (65535 colours) and 250 cd/m2 brightness make it suitable for replacing mechanical switch panels with intelligent, graphical control pads.The unit is powered either by PoE (IEEE 802.3af, Class 1) or from a +12 ~ 48 VDC terminal block. It provides 16 MB SDRAM and 16 MB Flash, a real-time clock, one 10/100 Base-TX Ethernet port and two serial ports that can be configured as RS-232 or RS-485. The COM ports are 2500 VDC isolated. XV-board I/O expansion boards can be added for extra I/O.Programming is carried out with the free HMIWorks tool, which offers a Ladder Designer for PLC users and a C language environment for IT users. The front panel is rated IP65 / NEMA 4, with a rotary switch, reset button, buzzer and status LEDs.ApplicationsBuilding automationHome automationIndustrial automationUpgrading mechanical switch panels to intelligent control pads

The VPD-173X-64 is a 7-inch touch HMI from the VPD Series, designed for operator control in building, home and industrial automation. Its high-resolution colour TFT touch screen replaces mechanical switches with a configurable graphical interface, and the unit mounts on a standard wall outlet box.Connectivity centres on two serial ports, each selectable as RS-232 or RS-485 and isolated to 2500 VDC, plus a 10/100 Base-TX Ethernet port that can be powered over PoE (IEEE 802.3af, Class 1). The -64 suffix denotes the expanded memory of this variant, with 64 MB SDRAM and 64 MB Flash. A real-time clock, a buzzer and XV-board expansion complete the hardware.Programming is handled with the free HMIWorks tool, which offers a Ladder Designer for PLC users and a C language environment for software developers. The front panel is rated NEMA 4 / IP65. The unit is listed with CE, UKCA, FCC, RoHS and WEEE certifications.ApplicationsBuilding automationHome automationIndustrial automationOperator control panels replacing mechanical switches