CL-212-E Data Logger Module for PM2.5, CO2, Temperature and Humidity
Data logger module measuring PM2.5, NDIR CO2, temperature, humidity and dew point, with up to 450,000 time-stamped records, RS-485 and Ethernet PoE, and Modbus TCP or MQTT support.
- Measures PM2.5, NDIR CO2, temperature, humidity and dew point
- Stores up to 450,000 records with date and time stamps
- RS-485 and Ethernet interfaces with PoE support
- DCON, Modbus RTU, Modbus TCP and MQTT protocols
- 1 x Form A relay output for alarm or IAQ device control
- Real-time access through free Windows software, iOS and Android apps, or a web browser
537,00 EUR per piece
| 1–9 pcs | 537,00 EUR | |
|---|---|---|
| 10–30 pcs | 521,00 EUR | −3 % |
| 31+ pcs | 510,00 EUR | −5 % |
Termékinformációk "CL-212-E Data Logger Module for PM2.5, CO2, Temperature and Humidity"
CL-212-E CR is a data logger module for monitoring indoor air quality. It records PM2.5, CO2, temperature, humidity and dew point, storing up to 450,000 downloadable records with date and time stamps. A non-dispersive infrared (NDIR) sensor provides the CO2 measurement.
The module connects through RS-485 or Ethernet and can be powered over PoE or from a +12 ~ +48 VDC terminal block. It supports the DCON, Modbus RTU, Modbus TCP and MQTT protocols, so it can be integrated into existing HMI or SCADA systems. A single Form A relay output can be used for alarm signalling or for controlling IAQ equipment.
Real-time readings can be viewed from a PC, iOS or Android device, or a web browser, provided they are on the same local network as the module. Logged data can be exported to CSV for analysis. The module is suited to ceiling or wall mounting and is rated IP20 for indoor use.
Applications
- Transportation of food or pharmaceuticals
- Food and beverage industry (HACCP)
- Blood stations and pharmacies
- Building and energy management
- Warehouse management
- Museums, archives and galleries
- Indoor or underground parking lot air quality monitoring
| Product type: | Data logger module |
|---|---|
| Interface: | Ethernet, RS-485 |
| Protocol: | DCON, Modbus RTU, Modbus TCP, MQTT |
| Relay outputs: | 1 |
| Ports: | 2 |
| PoE: | Yes |
| Power input: | +12 ~ +48 VDC |
| Operating temperature: | 0 ~ 50 °C |
| Mounting: | Ceiling/Wall |
| Housing: | IP20 |
Specifications
| System | |
|---|---|
| Alarm | PM2.5/RH/Temperature |
| Real Time Clock | Yes |
| Data Logger | Yes, up to 450,000 records |
| Temperature Measurement | |
| Range | -10 ~ +50°C |
| Resolution | 0.1°C |
| Accuracy | ±0.6°C |
| Humidity Measurement | |
| Range | 0 ~ 100% RH, Non-condensing |
| Resolution | 0.1% RH, Non-condensing |
| Accuracy | ±5% RH, Non-condensing |
| Dew Point | |
| Range | Calculated using temperature and relative humidity |
| Resolution | 0.1°C |
| CO2 Measurement | |
| Range | 0 to 9999 ppm (NDIR) |
| Resolution | 1 ppm |
| Accuracy | ±40 ppm ±3% of measured value |
| Response Time | 120 seconds |
| Warm-up Time | 5 minutes |
| PM2.5 Measurement | |
| Range | 0 ~ 400 μg/m3 |
| Resolution | 1μg/m3 |
| Response Time | <= 1 min. |
| Relay Output | |
| Channels | 1 x Form A, SPST 30 VDC @ 16 A or 250 VAC @ 16 A |
| Ethernet | |
| Ports | 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicators) |
| COM Ports | |
| Ports | 1 x RS-485 1 x Ethernet |
| Protocol | DCON and Modbus/RTU (RS-485) Modbus TCP and MQTT (Ethernet) |
| Power | |
| Consumption | Non-PoE: 2.9 W (Max.) PoE: 3.22 W (Max.) |
| Powered from Terminal Block | +12 ~ +48 VDC |
| Mechanical | |
| Dimensions (mm) | Ø 150 x 53 (Ø x H) |
| Installation | Ceiling Mounting/Wall Mounting |
| Ingress Protection Rating | IP20 |
| Environment | |
| Operating Temperature | 0 ~ 50°C |
| Storage Temperature | -30 ~ +75°C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Bejelentkezés