DN-25 D-sub I/O Connector Block, 9-pin and 25-pin with DIN-rail Mounting
DIN-rail I/O connector block with one 9-pin and one 25-pin D-sub connector, pin-to-pin screw terminals at 5.08 mm pitch, supplied with two pre-made D-sub cables.
- One 9-pin and one 25-pin D-sub connector on a single DIN-rail block
- Pin-to-pin screw terminal connection for I/O wiring
- 5.08 mm terminal pitch
- Supplied with CA-0920 DB9 to DB9 RS-232 cable, 2M
- Supplied with CA-2520 DB25 male to male cable, 45º, 2M
- DIN-rail mounting, 48 mm x 76 mm
65,00 € per piece
| 1-9 pcs | 65,00 € | |
|---|---|---|
| 10-30 pcs | 62,00 € | −5 % |
| 31+ pcs | 59,00 € | −9 % |
Toote teave "DN-25 D-sub I/O Connector Block, 9-pin and 25-pin with DIN-rail Mounting"
The DN-25 CR is a DIN-rail I/O connector block that breaks out signals from 9-pin and 25-pin D-sub connectors to screw terminals, giving engineers an accessible wiring point for field connections. It is listed in the DAQ daughter board accessories category.
Each pin of the D-sub connectors is wired pin-to-pin to a screw terminal with 5.08 mm pitch, which keeps field wiring straightforward. The block measures 48 mm x 76 mm and mounts on a DIN rail.
The package includes two cables: a CA-0920 DB9 (male) to DB9 (male) cable wired RS-232 Pin1-Pin9, 2M long, and a CA-2520 DB25 male to male cable, 45º, 2M long. The unit is rated for 0 ~ 60°C operation and -20 ~ 70°C storage, with 5% ~ 90% RH non-condensing humidity, and carries CE, UKCA, FCC, RoHS and WEEE certifications.
Applications
- Wiring field I/O signals to D-sub connected data acquisition hardware
- DIN-rail installation in control cabinets
| Product type: | I/O connector block |
|---|---|
| Interface: | D-sub 9-pin, D-sub 25-pin |
| Operating temperature: | 0 ~ 60 °C |
| Mounting: | DIN-rail |
Specifications
| Mechanical | |
|---|---|
| Dimensions (mm) | 48 mm x 76 mm |
| Installation | DIN-Rail mounting |
| Environment | |
| Operating Temperature | 0 ~ 60°C |
| Storage Temperature | -20 ~ 70°C |
| Humidity | 5% ~ 90% RH, non-condensing |
Specifications as published by the manufacturer. Subject to change.
Logi sisse
Sarnased tooted
The DN-25/N CR breaks out signals from a 9-pin and a 25-pin D-sub connector to pin-to-pin screw terminals on a DIN rail, giving engineers a tidy wiring point for field connections without custom cabling.The block uses a 5.08 mm pitch and a compact 48 mm x 76 mm footprint for DIN-rail installation. Two cables are supplied with the unit: a 2 m CA-0920 DB9 male to DB9 male RS-232 cable (pin 1 to pin 9) and a 2 m CA-2520 DB25 male to male cable with 45º connectors.Rated for an operating range of 0 ~ 60°C with storage from -20 ~ 70°C and 5% ~ 90% RH non-condensing humidity. The unit carries CE, UKCA, FCC, RoHS and WEEE marking.ApplicationsBreaking out D-sub I/O signals to screw terminals in control cabinetsWiring DAQ daughter board signals on a DIN rail
DN-20 CR is a DIN-rail mounted I/O connector block that breaks out two 20-pin headers to pin-to-pin screw terminals, giving engineers a practical way to wire field signals in a control cabinet instead of terminating flat cables directly.Each 20-pin header is routed to its own set of screw terminals at a 5.08 mm pitch, so the wiring can be checked and serviced without disturbing the cable connections. The board is supplied with two CA-2010 flat cables, each 20-pin and 1 m long, for connection to the header side.The board is rated for 0 ~ 60°C operation and carries CE, UKCA, FCC, RoHS and WEEE certification marks. Overall dimensions are 147 mm x 75 mm.ApplicationsField wiring for 20-pin header I/O connectionsControl cabinet installation on DIN-rail
The DN-20-381 is a DAQ daughter board that breaks out two 20-pin headers to pin-to-pin screw terminals, giving engineers a practical way to wire I/O signals from a 20-pin header to field connections. It is designed for DIN-rail mounting in a cabinet and has a 3.81 mm terminal pitch.Two CA-2010 flat cables (20-pin, 1 m) are included, so the board can be connected to a compatible header source straight out of the box. The board measures 103 mm x 86 mm and is rated for an operating temperature of 0 ~ 60°C.The DN-20-381 carries CE, UKCA, FCC and WEEE marks. Check the header layout of your host board before ordering, as the terminal board is intended for 20-pin header I/O.ApplicationsWiring field signals from 20-pin header DAQ daughter board I/O to screw terminalsCabinet installations using DIN-rail mounted terminal wiring
The DN-20/N CR is a header-to-screw-terminal board that breaks out two 20-pin headers to pin-to-pin screw terminals, giving engineers a practical way to wire field signals to a DAQ daughter board. Each 20-pin header connects to the terminals at a 5.08 mm pitch.The kit includes two CA-2010 flat cables (20-pin, 1 m), so the board can be connected to the daughter board without sourcing separate cabling. The series specifications list DIN-rail installation, which simplifies mounting inside a control cabinet.Check the mounting and wiring details against your installation before ordering, as the price list entry for this code does not restate the DIN-rail option. The series operating range is 0 ~ 60 °C, with storage from -20 ~ 70 °C.ApplicationsWiring field signals to a DAQ daughter board via flat cable and screw terminals