WISE-7526M MQTT I/O Module with PoE and 2-port Switch, 6-ch AI, 2-ch AO
Web-configured WISE I/O module with 6 analogue inputs, 2 analogue outputs, 2 digital inputs and 2 digital outputs, supporting Modbus TCP and MQTT, with PoE and a 2-port switch.
- Configured entirely in a browser, with no additional software tool required
- IF-THEN-ELSE logic engine (72 rules supported) for local control without programming
- 6 differential analogue inputs with jumper-selectable ranges, 16-bit resolution and 240 Vrms overvoltage protection
- 2 analogue outputs (12-bit), 2 dry/wet digital inputs and 2 isolated open-collector digital outputs
- Modbus TCP for SCADA integration and MQTT for IT and IoT system integration
- IEEE 802.3af-compliant PoE (Class 1) or 12 ~ 48 VDC terminal block power
This item is quoted per order. Send us your quantity and we reply with price and delivery time.
Request a quote
Δεν είναι πλέον διαθέσιμο
Πληροφορίες για το προϊόν "WISE-7526M MQTT I/O Module with PoE and 2-port Switch, 6-ch AI, 2-ch AO"
WISE-7526M CR is a browser-configured I/O module for engineers who need analogue measurement, digital sensing and switching at the field level without writing control code. Control logic is built from IF-THEN-ELSE rules entered through the module's web pages, so it can be commissioned quickly from any standard browser.
The module combines six differential analogue inputs, two analogue outputs, two digital inputs and two digital outputs on one unit. Each analogue input can be set to its own range, and the inputs are protected against overvoltage up to 240 Vrms. Timers, schedules, internal registers and I/O monitoring are available for local automation tasks.
For connectivity, the module supports Modbus TCP for SCADA integration and MQTT for IT and IoT platforms. Power can be taken from an IEEE 802.3af-compliant PoE network or from a 12 ~ 48 VDC terminal block. A built-in two-port Ethernet switch allows units to be daisy-chained along a network run, reducing cabling and the need for separate switches.
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote diagnosis and Testing Equipment
| Product type: | I/O module |
|---|---|
| Interface: | Ethernet |
| Protocol: | Modbus TCP, MQTT |
| Digital inputs: | 2 |
| Digital outputs: | 2 |
| Analog inputs: | 6 |
| Analog outputs: | 2 |
| Ports: | 2 |
| PoE: | Yes |
| Isolation: | 2500 VDC |
| Power input: | 12 ~ 48 VDC |
| Operating temperature: | -25 ~ +75 °C |
| Mounting: | Wall |
Specifications
| Software | |
|---|---|
| Protocol | • Modbus TCP • CGI Command (Sending) • MQTT Client (non-SSL) • Active I/O (MQTT Publish) |
| Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (72 rules supported) • I/O channel monitoring and control • Timer operation (24 set supported) • Schedule operation (24 set supported) • Internal Register operation (48 set supported) • Recipe operation (24 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function • SNTP Time Synchronization |
| CPU Module | |
| CPU | 32-bit CPU (400 MHz) |
| Isolation | |
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 12 x I/O Channel Status |
| Analog Input | |
| Channels | 6 (Differential) |
| Type | ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 16-bit |
| Accuracy | ±0.1% |
| Sampling Rate | 10 Sample/Sec. (Total) |
| Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
| Common Mode Rejection | 86 dB Min. |
| Normal Mode Rejection | 100 dB |
| Common Voltage Protection | ±200 VDC |
| Overvoltage Protection | 240 Vrms |
| Overcurrent Protection | Yes, 50 mA Max. at 110 VDC/VAC Max |
| Individual Channel Configuration | Yes |
| Channel-to-Channel Isolation | Yes, ±400 VDC |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Zero Drift | ±20 μV/°C |
| Span Drift | ±25 ppm/°C |
| Analog Output | |
| Channels | 2 |
| Type | 0 ~ 5 VDC, ± 5 VDC, 0 ~ 10 VDC, ± 10 VDC 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
| Resolution | 12-bit |
| Accuracy | ±0.1% of FSR |
| Open Wire Detection | Yes, for 4 ~ 20 mA only |
| Voltage Output Capability | 20 mA @ 10 V |
| Current Load Resistance | 500 Ω |
| Digital Input/Counter | |
| Channels | 2 |
| Type | Dry + Wet Contact |
| Sink/Source (NPN/PNP) | Dry: Source Wet: Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: +1 VDC Max. |
| OFF Voltage Level | Dry: Open Wet: +3.5 VDC ~ + 30 VDC |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Effective Distance | 500M Max. |
| Overvoltage Protection | +30 VDC |
| Digital Output | |
| Channels | 2 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +5 VDC ~ +50 VDC |
| Load Current | 700 mA/Channel |
| Overvoltage Protection | 60 VDC |
| Overload Protection | 1.4 A |
| Short-circuit Protection | Yes |
| Ethernet | |
| Ports | RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators) |
| PoE | Yes |
| Power | |
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 4.4 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
| Dimensions (mm) | 97 x 120 x 42 (W x L x H) |
| Installation | Wall Mounting |
| Environment | |
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Specifications as published by the manufacturer. Subject to change.
Downloads
Σύνδεση